Research suggests that placebo can reduce the misinformation effect. We aimed to examine for the first time whether placebo administered in the guise of caffeine can reduce the misinformation effect. One hundred and twenty -three healthy volunteers were randomly assigned to four groups in a 2 Placebo (Present, Not Present) × 2 Narrative (Misleading, Correct) study design. Participants from placebo groups drank 100 ml of placebo solution. They were told that it was water mixed with caffeine which could positively influence their memory. After three minutes, they watched a short movie clip as an original event and read a narrative with misleading details or correct details as a postevent information; they then completed a 22 -item, two -alternative forced -choice questionnaire. The results reveal that the misinformation effect occurred. Although participants in the placebo with misinformation group scored better than participants who did not drink placebo and read the narrative containing misleading details, the difference was not statistically significant. Thus, it is concluded that placebo might not be enough to reduce the misinformation effect when it is administered in the guise of caffeine.

The meaning of temporal distributiveness occurs either in situations in which a habitual activity is correlated with the recurrent periods of time, or in situations in which the recurrent periods of time are accompanied by an activity. The present paper is yet another contribution to a series of papers exploring temporal constructions in Polish that express the meaning of distributiveness. It focuses on the analysis of constructions such as ostrzał gęstniał z każdą minutą, which are exponents of the so-called intensifying and distributive time.

Koumiss has beneficial therapeutic effects on bacterial diseases. Four antibacterial com- pounds from yeasts ( Kluyveromyces marxianus and Saccharomyces cerevisiae) in koumiss were evaluated for their antibacterial effects against three Gram-negative bacteria, three Gram-positive bacteria and five pathogenic Escherichia coli strains. The antibacterial compounds from yeasts in koumiss were extracted, and their main components were determined. The inhibition zones were analyzed, and their minimum inhibition concentrations (MICs) and minimum bactericidal concentrations (MBCs) were determined. Aqueous phases of Kluyveromyces marxianus and Saccharomyces cerevisiae at pH 2.0 and 8.0 produced larger inhibition zones than those in other phases, and then antibacterial compounds from K. marxianus (K2, pH=2.0; K8, pH=8.0) and S. cerevisiae (S2, pH=2.0; S8, pH=8.0) were obtained. Their main components were organic acids and killer toxins. K2 had more propanoic acid and S2 had more oxalic acid than others. The inhibition zones of K2, K8, S2 and S8 against three Gram-negative bacteria and three Gram-positive bacteria were 12.03-23.30 mm, their MICs were 0.01-0.13 g/mL, and MBCs were 0.03-0.50 g/mL. Meantime, the inhibition zones of K2, K8, S2 and S8 against five pathogenic E. coli were 16.10-25.26 mm, their MICs were 0.03-0.13 g/mL, and MBCs were 0.13-1.00 g/mL. These four antibacterial compounds from yeasts in koumiss had broad antibacterial spectrum. In addition, K2 and S2 were better than K8 and S8.

The presence of 31 species of birds was observed at sea sout of 50°S, out of this number 26 species were present also south of 60°S. The most numerous aggregations of birds were recorded in the regions of: Elephant Island, the South Orkneys and NE part of Bransfield Strait. The average number of birds during 10-minute observation was 74.5. In the areas under observations Daption capense predominated quantitatively. The following species were subdominant: Pygoscelidae, Oceanites oceanicus, Diomedea melanophris, Fulmarus glacialoides and Macronectes giganieus. In the total number of the birds observed krill-eaters contributed in 80.1% plankton-eaters — 7.8%, squid-eaters — 6.2% omnivores — 5.9% and fish-eaters — 0.1%. In comparison with the autumnal observations more than twice as many birds at sea were observed in the same area.

The paper presents the results of studies of hybrid composite layers Ni/Al2O3/Cgraphite produced by the electrodeposition method. Three variants of hybrid composite layers were prepared in electrolyte solutions with the same amounts of each dispersion phases which were equal to 0.25; 0.50 and 0.75 g/dm3. The structure of Ni/Al2O3/Cgraphite layers as well as the Al2O3 and graphite powders, which were used as dispersion phases was investigated. The results of morphology and surface topography of produced layers are presented. The modulus of elasticity and microhardness of the material of produced layers were determined by DSI method. Tribological and corrosion resistance tests of produced layers were carried out. Realized studies have shown that the material of the produced layers is characterized by a nanocrystalline structure. Incorporation of dispersion phases into the nickiel matrix increases the degree of surface development of layers. Ni/Al2O3/Cgraphite layers are characterized by high hardness and abrasion resistance by friction, furthermore, they provide good corrosion protection for the substrate material.

The double barrier separate confinement heterostructure (DBSCH) design aimed at reduction of vertical beam divergence and increase of catastrophic optical damage (COD) level for high power laser diodes (LDs) operation is presented. Insertion of thin, wide-gap barrier layers at the interfaces between waveguide and cladding layers of SCH gives an additional degree of freedom in design making possible more precise shaping of the optical field distribution in the laser cavity. By comparison with the large optical cavity (LOC) heterostructure design it has been shown that the low beam divergence emission of DBSCH LDs can be attributed to the soft-profiled field distribution inside the cavity. This ‘soft mode profile’ seems to determine narrow laser beam emission rather than the field distribution width itself.

The potential problem with the soft-profiled but relatively narrow (at half-maximum) mode distribution is a lower COD level. Widening of the mode profile by the heterostructure design corrections can increase it, but care must be taken to avoid excessive decrease of confinement factor (Γ). As a result it is shown that DBSCH design is possible, where the low beam divergence and high COD level is achieved simultaneously.

Wide stripe gain-guided LDs based on GaAsP/AlGaAs DBSCH SQW structures have been manufactured according to the design above. Gaussian-shaped narrow directional characteristics are in relatively good agreement with modelling predictions. Vertical beam divergences are 13–15◦ and 17–18◦ FWHM for design versions experimentally investigated. Threshold current densities of the order of 350–270 Acm-2 and slope efficiencies of 0.95 and 1.15 W/A have been recorded for these two versions, respectively. Optical power at the level of 1 W has been achieved. The version with lower beam divergence proves to be more durable. Higher optical power levels are to be obtained after heterostructure doping optimisation.

Titanium nitride (TiN) is regarded as a potential biomaterial for blood-contact applications. TiN thin films were fabricated by pulsed

laser deposition with the Nd:YAG laser on biologically applied polyurethane. Transmission electron microscopy (TEM) study of 250 nm thick films revealed columnar structure. Such films were observed to be brittle, which led to crack formation and secondary nucleation of microcolumn. TEM studies showed a kinetic mechanism of growth (columnar) in films of 250 nm thickness. It was stated that thinner films were much smoother and uniform than the thicker ones, which could be associated with the surface diffusion mechanism to appear. In order to improve the coatings elasticity, the thickness was reduced to 50 nm, which limited the deposition mechanism operation to the early stage. TEM cross-section observation revealed elastic properties of thin films. A biological test showed that TiN surface film produced on polyurethane is characterized by good biocompatibility and decreased surface affinity for cell adhesion. Films of 0.25 and 0.5 1m thick of TiN were selected for theoretical finite element modelling (FEM) using ADINA program. The micro cracks formation predicted in simulation was verified by phenomena observed in microstructure examinations.

This short paper presents the activity and achievements of Professor Zenon Waszczyszyn, active member of Polish Academy of Sciences and Polish Academy of Arts and Sciences, Professor of Cracow University of Technology and Rzeszów University of Technology, doctor honoris causa of Budapest University of Technology and Economics, creator of scientific schools in the field of stability of engineering structures and mechanics of shell structures as well as in the field of computational intelligence methods, in particular artificial neural networks.