Coal production in 2018 increased by 3.3% and amounted to 7.81 million tons. Compared to 2010, it increased by 620 million tons. The structure of coal production in the world is very stable in the analyzed period of 2010–2018. Steam coal dominates in production with a share of 77%. Since 1990, the share of coal in the consumption of primary energy carriers has fallen by 3% in the global economy. In the EU, the share of coal in the consumption of primary energy carriers is more than twice lower than in the world, and in 2018 amounted to 13%. BP estimates the sufficiency of coal proven reserves based on 2018 data for the next 132 years. For oil and gas, they are estimated at 51 years. The decline in hard coal production in the European U nion can be dated almost continuously since 1990, which has decreased by 74%. In 2018, 74 million tons of coal were produced in the EU. In 2018, hard coal consumption in EU countries dropped to 226 million tons, i.e. by 20.6%.

In 2018, global trade in steam coal amounted to 1.14 billion tons. The situation in China is crucial for the international coal market. The slight change in the import policy of this country significantly affects the situation in international trade in steam coal. In 2019, coal prices (at Newcastle, Richards Bay, ARA ports) dropped by an average of 23 U SD/ton. The average decreases for these three indices were 33%. The prices of steam coal in the forecasts presented in the paper are under pressure of the falling demand.

The aim of the research is to assess and discuss the diversity of energy production and consumption in European Union countries. The time scope covers the years 2007 and 2016. The diversity of EU countries was examined using the cluster analysis. The following diagnostic features were adopted for the analysis: energy dependency rate (in %), gross inland consumption of energy per 10,000 inhabitants (toe/10,000 inhabitants), primary production of energy (all products) per 10,000 inhabitants (toe/10,000 inhabitants), primary production of renewable energies per 10,000 inhabitants (toe/10,000 inhabitants), primary production of energy (without renewable energy) per 10,000 inhabitants (toe/10,000 inhabitants). Comparing the included indicators from 2016 to 2007 for all EU countries, an increase was recorded only for the primary production of renewable energies per 10,000 inhabitants,. Based on the cluster analysis, the examined countries were divided into six groups. According to the results of the research carried out, Northern and Eastern European countries are characterized by low energy dependence. However, according to the analysis carried out, this dependence is guaranteed based on various energy sources. The Scandinavian countries (Sweden, Finland) owe their high independence to the production of large amounts of energy from renewable sources. On the other hand, countries such as the Netherlands, Denmark, Estonia and the whole of Eastern Europe are based on primary energy sources such as: coal, oil and gas. Southern Europe countries (Greece, Spain, Italy, Portugal, Cyprus, Malta) are characterized by high energy dependence, as evidenced by low rates in the area of energy production, both in total and renewable and non-renewable energy production.

The article describes the influence of anomalous values and local variability on the structure of variability and the estimation of deposit parameters. The research was carried out using statistical and geostatistical methods based on the Pb accumulation index in the shale series in part of the Cu-Ag ore deposit, LGCD (Lubin-Głogów Copper District). The authors recommend the use of a geostatistical tool, the so-called semivariogram cloud to determine the anomalous values. Anomalous values determined by the geostatistical method and removed from the dataset have resulted in a significant reduction of the relative variability of data, which is still very large in the case of the analyzed parameter or parameters with similar statistical features such as extreme variability and strongly asymmetric distribution. Calculations of the resources of this element can be treated only as estimates and formally classified to category D. The hypothetical assumption of the absence of sampling errors, resulting in a decrease in the magnitude of local variation, leads to a certain reduction of the median error of resource estimates. However, they are still high (> 35%). This is due to the large natural variability of the accumulation index of Pb on the local observation scale. The current method for collecting samples from mine workings of the Cu-Ag deposits in the Lubin-Głogów Copper District (LGCD), aimed at the proper assessment of copper resources, the Cu content, and at estimating the quality of copper output, makes it impossible to achieve an accuracy of estimates of Pb resources similar to that obtained for the main metal. Theoretically, this effect can be achieved by a strong concentration of the sample collection points and thanks to a multiple increase in the samples weight; this, however, is unrealistic for both economic and organizational reasons. It is therefore to be expected that the assessment of Pb resources and other accompanying elements of similar statistical features (e.g. As), located in parts of the deposit where mining activities are to be carried out, will be subject to significant errors.

Using renewable energy sources for electricity production is based on the processing of primary energy occurring in the form of sun, wind etc., into electrical energy. Economic viability using those sources in small power plants strongly depends on the support system, based mainly on financial instruments. Micro-installations, by using special instruments dedicated to the prosumer market may become more and more interesting not only in terms of environmental energy, but also financial independence. In the paper, the term hybrid power plant is understood to mean a production unit generating electricity or electricity and heat in the process of energy production, in which two or more renewable energy sources or energy sources other than renewable sources are used. The combination of the two energy sources is to their mutual complementarity, to ensure the continuity of the electricity supply. The ideal situation would be if both sources of energy included in the hybrid power plant continuously covered the total demand for energy consumers. Unfortunately, due to the short-term and long-term variability of weather conditions, such a balance is unattainable. The paper assesses the possibility of balancing the hybrid power plant in daily and monthly periods. Basic types of power plants and hybrid components and system support micro-installations were characterized. The support system is based particularly on a system of feed-in tariffs and the possibility of obtaining a preferential loan with a subsidy (redemption of part of the loan size). Then, an analysis of energy and economic efficiency for a standard set of hybrid micro-installations consisting of a wind turbine and photovoltaic panels with a total power of 5 kW, were presented. Fourteen variants of financing, economic efficiency compared with the use of the method of the simple payback period were assumed.

The selection of appropriate financial sources by enterprises is one of the key tasks faced by the management board. In the presented article, the Authors decided to verify the capital structure of companies from selected European economies and to compare this capital structure between developed and advanced developing markets. The research was conducted on 18 European economies, taking into consideration data for 2017 and five variables defining the structure of financing. The results of the analysis show that the economies in the basket of developed countries are characterised by a higher level of indebtedness, with the major difference in taking on interest-bearing liabilities.

The local aspect of aging is often ignored. However, municipalities, in particular cities will be affected by the consequences of population aging, in particular a decrease in tax revenues and an increase of expenditures on public goods demanded by the elderly. In this paper we use a static general equilibrium model to analyse the impact of aging on city’s finances. We show that an increase in the number of pensioners will raise the cost of public goods. However, an increase in the number of working elderly can alleviate the situation.

The paper indicates the signifi cance of the development policy territorialization for an enhancing competitiveness of cities and regions. The characteristics of such a policy allow revealing of the nature of territorial instruments. The authors, referring to their consulting practice and the research work done for the Ministry of Development, frame their recommendations. Those recommendations constitute the guidelines for amendment of territorial instruments in the context of National Regional Development Strategy actualization.

In empirical research on financial market microstructure and in testing some predictions from the market microstructure literature, the behavior of some characteristics of trading process can be very important and useful. Among all characteristics associated with tick-by-tick data, the trading time and the price seem the most important. The very first joint model for prices and durations, the so-called UHF-GARCH, has been introduced by Engle (2000). The main aim of this paper is to propose a simple, novel extension of Engle’s specification based on trade-to-trade data and to develop and apply the Bayesian approach to estimation of this model. The intraday dynamics of the return volatility is modelled by an EGARCH-type specification adapted to irregularly time-spaced data. In the analysis of price durations, the Box-Cox ACD model with the generalized gamma distribution for the error term is considered. To the best of our knowledge, the UHF-GARCH model with such a combination of the EGARCH and the Box-Cox ACD structures has not been studied in the literature so far. To estimate the model, the Bayesian approach is adopted. Finally, the methodology developed in the paper is employed to analyze transaction data from the Polish Stock Market.

The international community has conventions which regulate matters connected with the transport of cargoes by sea. In the second half o f the twentieth century an attempt was made to regulate multimodal transport. In 1980, under the auspices o f UNCTAD, a Convention on International Multimodal Transport of Goods was adopted. However, it has still not been implemented. It is a move in the direction of the complete regulation of the transport of goods by various means of transport. In 2001 the United Nations Commission on International Trade Law (UNCITRAL) began work on a convention relating to international goods transport. The new convention is intended to replace the La Haye Regulations, the La Haye/Wisby regulations and the Hamburg regulations. The author of this paper considers that the application of unified principles to various means of transport maybe be unsuccessful. The project for the future convention applies to the transport of cargoes wholly or in part by sea. The author refers to maritime transport law and shows what changes the future convention is to introduce.

This article examines the influence of International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW 1978) on actual maritime workforce training system. The Convention is in constant development; the authors discuss 1995 and 2010 amendments as well as the European Union law context, namely the role of the European Maritime safety Agency in implementation of the Convention. The article analyses integration of STCW system into Polish law and uncover shortcomings and delay of this process. In conclusion, the authors recommend reinstatement of standardised master’s degree for deck department officers in Maritime University in Gdynia’s Faculty of Navigation in order to carry out the provisions of the Convention and connect theory to practice.

The article presents the main elements of the European transport policy and the issues prevailing in the public debate in the last decade, i.e. 2010-2020. In particular, it analyses the challenges for European transport resulting from the need to combat climate change and to ensure a high level of environmental protection and safety, while taking into account the progressing technological revolution. The main assumptions of the European Green Deal, which aims to achieve climate neutrality by the European Union by 2050, are presented. The example of maritime transport serves to describe how various transport sectors are being brought into line with EU climate targets.

Cooling of the hot gas path components plays a key role in modern gas turbines. It allows, due to efficiency reasons, to operate the machines with temperature exceeding components' melting point. The cooling system however brings about some disadvantages as well. If so, we need to enforce the positive effects of cooling and diminish the drawbacks, which influence the reliability of components and the whole machine. To solve such a task we have to perform an optimization which makes it possible to reach the desired goal. The task is approached in the 3D configuration. The search process is performed by means of the evolutionary approach with floatingpoint representation of design variables. Each cooling structure candidate is evaluated on the basis of thermo-mechanical FEM computations done with Ansys via automatically generated script file. These computations are parallelized. The results are compared with the reference case which is the C3X airfoil and they show a potential stored in the cooling system. Appropriate passage distribution makes it possible to improve the operation condition for highly loaded components. Application of evolutionary approach, although most suitable for such problems, is time consuming, so more advanced approach (Conjugate Heat Transfer) requires huge computational power. The analysis is based on original procedure which involves optimization of size and location of internal cooling passages of cylindrical shape within the airfoil. All the channels can freely move within the airfoil cross section and also their number can change. Such a procedure is original.

In the paper the paths of bubbles emitted from the brass nozzle with inner diameter equal to 1.6 mm have been analyzed. The mean frequency of bubble departure was in the range from 2 to 65.1 Hz. Bubble paths have been recorded using a high speed camera. The image analysis technique has been used to obtain the bubble paths for different mean frequencies of bubble departures. The multifractal analysis (WTMM - wavelet transform modulus maxima methodology) has been used to investigate the properties of bubble paths. It has been shown that bubble paths are the multifractals and the influence of previously departing bubbles on bubble trajectory is significant for bubble departure frequency fb > 30 Hz.

In this work, steady flow-field and heat transfer through a copper-water nanofluid around a rotating circular cylinder with a constant nondimensional rotation rate α varying from 0 to 5 was investigated for Reynolds numbers of 5–40. Furthermore, the range of nanoparticle volume fractions considered is 0–5%. The effect of volume fraction of nanoparticles on the fluid flow and heat transfer characteristics are carried out by using a finite-volume method based commercial computational fluid dynamics solver. The variation of the local and the average Nusselt numbers with Reynolds number, volume fractions, and rotation rate are presented for the range of conditions. The average Nusselt number is found to decrease with increasing value of the rotation rate for the fixed value of the Reynolds number and volume fraction of nanoparticles. In addition, rotation can be used as a drag reduction technique.

The paper deals with pool boiling of water-Al2O3and water-Cu nanofluids on rough and porous coated horizontal tubes. Commercially available stainless steel tubes having 10 mm outside diameter and 0.6 mm wall thickness were used to fabricate the test heater. The tube surface was roughed with emery paper 360 or polished with abrasive compound. Aluminium porous coatings of 0.15 mm thick with porosity of about 40% were produced by plasma spraying. The experiments were conducted under different absolute operating pressures, i.e., 200, 100, and 10 kPa. Nanoparticles were tested at the concentration of 0.01, 0.1, and 1% by weight. Ultrasonic vibration was used in order to stabilize the dispersion of the nanoparticles. It was observed that independent of operating pressure and roughness of the stainless steel tubes addition of even small amount of nanoparticles augments heat transfer in comparison to boiling of distilled water. Contrary to rough tubes boiling heat transfer coefficient of tested nanofluids on porous coated tubes was lower compared to that for distilled water while boiling on porous coated tubes. A correlation equation for prediction of the average heat transfer coefficient during boiling of nanofluids on smooth, rough and porous coated tubes is proposed. The correlation includes all tested variables in dimensionless form and is valid for low heat flux, i.e., below 100 kW/m2.

The partial solution for the growing contamination of the environment is the implementation of new technologies. The most of the currently operated systems for surface and groundwaters treatment as well as for wastewater treatment characterize with complex technological arrangements based on a number of unit operations. In water-wastewater management membrane processes are more often applied, especially those in which the difference of pressure at both membrane sites is used as a driving force. As an example of such application is the use of nanofi ltration for groundwaters treatment at Water Treatment Plant Zawada near Dębica or the treatment of municipal landfi ll leachate and industrial wastewater at Eko Dolina Waste Utilization Plant in Łężyce near Gdynia (reverse osmosis unit capacity of 120 m /d). Municipal wastewater treatment based on membrane technologies has already been implemented at domestic wastewater treatment plant. It is especially profi table, when the load of contaminant present in a wastewater varies within a year. In the case of membrane systems use, this issue can be neglected. As an example of membrane based system may serve WWTP in Rowy n/Ustka started up in 2013 and modernized in 2017. The latest trends and developments of selected suppliers of membrane systems are also presented.

To investigate the adsorptive properties of a local laterite deposited in Chenzhou, Hunan province, China, the adsorptive properties of the natural laterite were investigated by batch technique in this study. The effects of contact time, pH, ionic strength, temperature, and the concentration on adsorption properties were also analyzed. The obtained experimental results show that the main mineral composition of laterite is kaolinite and montmorillonite. The adsorption process achieved equilibrium within 60 minutes and 90 minutes for Sr(II) and Cr(VI), respectively. The adsorption capacities for Cr(VI) and Sr(II) by the laterite were about 7.25 mg·g^-1 and 8.35 mg·g^-1 under the given experimental conditions, respectively. The equilibrium adsorption data were fitted to the second-order kinetic equation. The adsorption capacity for Sr(II) onto the laterite increased with increasing pH from 3–11 but decreased with increasing ionic strength from 0.001 to 1.0 M NaCl. The Sr(II) adsorption reaction on laterite was endothermic and the process of adsorption was favored at high temperature. Similarly, the adsorption capacity for Cr(VI) onto the laterite increased with increasing pH from 3–11, however, the ionic strength and temperature had an insignificant effect on Cr(VI) adsorption. The adsorption of Cr(VI) and Sr(II) was dominated by ion exchange and surface complexation in this work. Furthermore, the Langmuir and Freundlich adsorption isotherm model was used for the description of the adsorption process. The results suggest that the studied laterite samples can be effectively used for the treatment of contaminated wastewaters.

Indirectly or externally fired gas turbines (IFGT or EFGT) are interesting technologies under development for small and medium scale combined heat and power (CHP) supplies in combination with micro gas turbine technologies. The emphasis is primarily on the utilization of the waste heat from the turbine in a recuperative process and the possibility of burning biomass even "dirty" fuel by employing a high temperature heat exchanger (HTHE) to avoid the combustion gases passing through the turbine. In this paper, finite time thermodynamics is employed in the performance analysis of a class of irreversible closed IFGT cycles coupled to variable temperature heat reservoirs. Based on the derived analytical formulae for the dimensionless power output and efficiency, the efficiency optimization is performed in two aspects. The first is to search the optimum heat conductance distribution corresponding to the efficiency optimization among the hot- and cold-side of the heat reservoirs and the high temperature heat exchangers for a fixed total heat exchanger inventory. The second is to search the optimum thermal capacitance rate matching corresponding to the maximum efficiency between the working fluid and the high-temperature heat reservoir for a fixed ratio of the thermal capacitance rates of the two heat reservoirs. The influences of some design parameters on the optimum heat conductance distribution, the optimum thermal capacitance rate matching and the maximum power output, which include the inlet temperature ratio of the two heat reservoirs, the efficiencies of the compressor and the gas turbine, and the total pressure recovery coefficient, are provided by numerical examples. The power plant configuration under optimized operation condition leads to a smaller size, including the compressor, turbine, two heat reservoirs and the HTHE.