problem of sound radiation from an unflanged duct with mean flow of the medium taking into account existence of all allowable wave modes and, in particular, occurrence of the so-called unstable wave, which results in decay of radiation on and in vicinity of the duct axis. The flow is assumed to be uniform with the source of flow located inside the duct, which is the case frequently occurring in industrial systems. Mathematical considerations, accounting for multimodal and multifrequency excitation and diffraction at the duct outlet, are based on the model of the semi-infinite unflanged hard duct with flow. In the experimental set-up a fan, mounted inside the duct served as the source of flow and noise at the same time modelled as an array of uncorrelated sources of broadband noise, what led to the axisymmetrical shape of the sound pressure directivity characteristics. The theoretical analysis was carried out for the root mean square acoustic pressure in the far-field conditions. Experimental results are presented in the form of the measured pressure directivity characteristics obtained for uniform flow directed inwards and outwards the duct compared to this observed for the zero-flow case. The directivity was measured in one-third octave bands throughout five octaves (500 Hz - 16 kHz) which, for a duct with radius of 0.08 m, corresponds to the range 0.74-23.65 in the reduced frequency ka (Helmholtz number) domain. The results obtained are consistent with theoretical solutions presented by Munt and Savkar, according to whom the weakening of the on-axis and close-to-axis radiation should take place in the presence of medium flow. Experimental results of the present paper indicate that this effect is observed even for the Mach number as low as 0.036.

The study presents a calculation method of the voltage induced by power-line sagged conductor in an inductively coupled overhead circuit of arbitrary configuration isolated from ground. The method bases on the solution utilizing the magnetic vector potential for modeling 3D magnetic fields produced by sagging conductors of catenary electric power lines. It is assumed that the equation of the catenary exactly describes the line sag and the influence of currents induced in the earth on the distribution of power line magnetic field is neglected. The method derived is illustrated by exemplary calculations and the results obtained are partially compared with results computed by optional approach.

The paper deals with construction of single-phase line start permanent magnet synchronous motor. Circuit-field single-phase line start permanent magnet synchronous motor model based on the mass production single-phase induction motor was applied in Maxwell program. Various rotor constructions were taken into account. Influence of the rotor construction on the motor properties was examined. Running motor performances were examined.

Vibration intensity in mobile machines depends on the road roughness profile, ride velocity and dissipative properties of machine components. To reduce vibrations of a mobile machine with a boom equipment one of the available passive methods, utilizing a hydropnematic system for boom support to improve flexibility, the system incorporating throttling valves. Energy dissipation in a hydropneumatic system controls the decay of vibrations of the machine body and equipment. In the range of large velocities, passive methods prove inadequate. When ride velocity is to be increased, at the same time the required safety features and stabilization of the position of machine equipment are to be provided, further dynamic analyses are fully merited to identify processes taking place in the driving system. The final result should be the synthesis of the LQR control system to modulate the loading characteristics of the motor and to control the flow in a hydraulic boom-support system.