Within this study, resonance phenomenon, which is one of the crucial problems in mechanical constructions, has been analyzed with respect to oil starvation failure in a ball bearing. A unique test rig is designed, constructed, and placed in a laboratory ambience. A ball bearing on the electrical motor, which is a component of the test rig, has been selected for acquisition of data within triple sensing technology in vibration, acoustic, and electrical consumption through testing conditions. The target of that study is condition monitoring of oil starvation fault and resonance fault for comparison of various predictive maintenance methods. The testing was carried out within the electrical frequency of 40.5 Hz, which actuated the electrical motor in order to identify the rotation speed. According to the analyzed results, oil starvation fault and resonance fault is most accurately inspected by vibration analysis.

Escalating quantity of industrial by-products generated, including oil palm shell (OPS) and palm oil fuel ash (POFA ) of the palm oil industries, has been a concern to many analysts. They are mostly disposed off as wastes that would heavily impact the environment quality. Therefore, this paper aimed to investigate the possibility of consuming these wastes by using OPS and POFA as replacement materials for fine aggregates in the concrete mixture. The mixtures were prepared by integrating unground palm oil fuel ash of 0%, 10%, and 20% (by weight of sand) to produce lightweight concrete. The experiments observed the mechanical performance of these specimens for 180 curing days. The results show the enhancement of concrete strength relative to the control mixture by using 10% of ash. This is owing to void filling mechanism and product of pozzolanic reaction due to the fine particles of the ash.

Ultrasonic emulsifying processes of immiscible liquids can be used to obtain stable emulsions. The authors used an ultrasonic sandwich head with an energy concentrator to obtain a suitable value of the energy density necessary for the emerge of ultrasonic cavitation. Two piezoelectric ring (Dext = 50 mm) transducers of Pz-26 type produced by FERROPERM were used to design the ultrasonic sandwich head. The frequency of the ultrasonic wave was 18.4 kHz and the excitation time of the ultrasonic transducer exiting 5 minutes. Visible bubbles during the generation of ultrasonic waves appeared in the mixture after exceeding the cavitation threshold. The authors determined also the cavitation threshold by measuring the electrical voltage conducted to the transducers. To receive long-lasting emulsion, the electrical voltage attained 300 Vpeak. The dispersion dependence on the emulsifying time was determined. The emulsion of linseed oil and water was stable through some months without surfactants.