Cavitation has been widely used in wastewater degradation, material synthesis and biomedical field under dual-frequency acoustic excitation. The applications of cavitation are closely related to the power (i.e. the rate of internal energy accumulation) during bubble collapse. The Keller–Miksis equation considering liquid viscosity, surface tension and liquid compressibility is used to describe the radial motion of the bubble. The model is built in predicting the power during bubble collapse under dual-frequency acoustic excitation. The influences of parameters (i.e. phase difference, frequency difference, and amplitude ratio) on the power are investigated numerically. With the increase of phase difference, the power can be fluctuated in a wide range at all conditions. Three typical characteristics of the power appear under the effects of frequency difference and amplitude ratio. With the increase of amplitude ratio, if the frequency difference is small, the power has two maximum values; and if the frequency difference is medium, there is a maximum value. Otherwise, the power monotonously decreases. The results can provide theoretical references for the selections of experimental parameters of sonoluminescence and sonochemistry in the dual-frequency acoustic field.

This article investigates and evaluates a handover exchange scheme between two secondary users (SUs) moving in different directions across the handover region of neighboring cell in a cognitive radio network. More specifically, this investigation compares the performance of SUs in a cellular cognitive radio network with and without channel exchange scheme. The investigation shows reduced handover failure, blocking, forced and access probabilities respectively, for handover exchange scheme with buffer as compared to exchange scheme without buffer. It also shows transaction within two cognitive nodes within a network region. The system setup is evaluated through system simulation.

Recently, attempts have been made to use porous metal as catalysts in a reactor for the hydrogen manufacturing process using steam methane reforming (SMR). This study manufactured Ni-Cr-Al based powder porous metal, stacked cubic form porous blocks, and investigated high temperature random stack creep property. To establish an environment similar to the actual situation, a random stack jig with a 1-inch diameter and height of 75 mm was used. The porous metal used for this study had an average pore size of ~1161 μm by rolling direction. The relative density of the powder porous metal was measured as 6.72%. A compression test performed at 1073K identified that the powder porous metal had high temperature (800°C) compressive strength of 0.76 MPa. A 800°C random stack creep test at 0.38 MPa measured a steady-state creep rate of 8.58×10–10 s–1, confirming outstanding high temperature creep properties. Compared to a single cubic powder porous metal with an identical stress ratio, this is a 1,000-times lower (better) steady-state creep rate. Based on the findings above, the reason of difference in creep properties between a single creep test and random stack creep test was discussed.

Tekst jest recenzją pracy: Violetta Julkowska, Historie rodzinne. Narracje – narratorzy – interpretacje (Poznań–Bydgoszcz: Instytut Historii UAM i Oficyna Wydawnicza EPIGRAM, 2018), 272 ss.