For most precious metal mines, cemented tailings backfill slurry (CTBS) with different cement-sand

ratio and solid concentration are transported into the gobs to keep the stability of the stope and mitigate

environmental pollution by mine tailing. However, transporting several kinds of CTBS through the same

pipeline will increase the risk of pipe plugging. Therefore, the joint impacts of cement-sand ratio and

solid concentration on the rheological characteristics of CTBS need a more in-depth study. Based on the

experiments of physical and mechanical parameters of fresh slurry, the loss of pumping pressure while

transporting CTBS with different cement-sand ratio, flux and solid mass concentration were measured

using pumping looping pipe experiments to investigate the joint impacts of cement-sand ratio and solid

concentration on the rheological characteristics of CTBS. Meanwhile, the effect of different stopped pumping

time on blockage accident was revealed and discussed by the restarting pumping experiments. Furthermore,

Fluent software was applied to calculate the pressure loss and velocity distribution in the pipeline to further

analysis experimental results. The overall trends of the simulation results were good agreement with the

experiment results. Then, the numerical model of the pipeline in the Sanshandao gold mine was conducted

to simulate the characteristics of CTBS pipeline transportation. The results show that the pumping pressure

of the delivery pump can meet the transportation requirements when there is no blockage accident. This

can provide a theoretical method for the parameters optimizing in the pipeline transportation system.

Computer-aided tools help in shortening and eradicating numerous repetitive tasks that reduces the gap between digital model and actual product. Use of these tools assists in realizing free-form objects such as custom fit products as described by a stringent interaction with the human body. Development of such a model presents a challenging situation for reverse engineering (RE) which is not analogous with the requirement for generating simple geometric models. Hence, an alternating way of producing more accurate three-dimensional models is proposed. For creating accurate 3D models, point clouds are processed through filtering, segmentation, mesh smoothing and surface generation. These processes help in converting the initial unorganized point data into a 3D digital model and simultaneously influence the quality of model. This study provides an optimum balance for the best accuracy obtainable with maximum allowable deviation to lessen computer handling and processing time. A realistic non trivial case study of free-form prosthetic socket is considered. The accuracy obtained for the developed model is acceptable for the use in medical applications and FEM analysis.