Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 3
items per page: 25 50 75
Sort by:
Download PDF Download RIS Download Bibtex

Abstract

This study was carried out to evaluate the aspect of microstructure and mechanical property development on additive manufactured pure Ti at elevated heat-input. For this work, pure Ti powder (commercial purity, grade 1) was selected, and selective laser melting was conducted from 0.5 to 1.4 J/mm. As a result, increase in heat-input led to the significant grain growth form 4 μm to 12 μm, accompanying with the change of grain shape, correctly widmanstätten structured grains. In addition, Vickers microhardness was notably increased from 228 Hv to 358 Hv in accordance with elevated heat-input, which was attributed to the increased concentration of oxygen and nitrogen mainly occurred during selected laser melting process.

Go to article

Authors and Affiliations

Dong-Jin Kim
Hyung-Giun Kim
Ji-Sun Kim
Kuk-Hyun Song
Download PDF Download RIS Download Bibtex

Abstract

In this study, precipitation of Ca in Al-Mg alloys containing a trace of Ca during homogenization was investigated using a transmission electron microscope (TEM) and calculated phase diagrams. TEM result indicated that the Ca-based particles found in the examined sample are Ca7Mg7.5Si14. From the calculation of Scheil-Gulliver cooling, it was found that the Ca was formed as Al4Ca and C36 laves phases with Mg2Si and Al13Fe4 from other impurities phase during solidification. No Ca-Mg-Si ternary phase existed at the homogenization temperature in the calculated phase diagram. From the phase diagram of Al-Al4Ca-Mg2Si three-phase isothermal at 490℃, it was shown that Ca7Mg6Si14 phase co-exists with Al, Mg2Si and Al4Ca in the largest region and with only Al and Mg2Si in Al4Ca-poor regions. It was thought that the Ca7Mg6Si14 ternary phase was formed by the interaction between Mg2Si and Al4Ca considering that the segregation can occur throughout the entire microstructures.
Go to article

Bibliography

[1] J.R. Davis, ASM International, Aluminum and Aluminum Alloys, Materials Park 1993.
[2] G . Wu, K. Dash, M.L. Galano, K.A.Q. O’Reilly, Corros. Sci. 155, 97 (2019).
[3] B.H. Kim, S.H. Ha, Y.O. Yoon, H.K. Lim, S.K. Kim, D.H. Kim, Mater. Lett. 228, 108 (2018).
[4] S.H. Ha, B.H. Kim, Y.O. Yoon, H.K. Lim, T.W. Lee, S.H. Lim, S.K. Kim, Sci. Adv. Mater. 10, 697 (2018).
[5] D. Ajmera, E. Panda, Corros. Sci. 102, 425 (2016).
[6] S.H. Ha, J.K. Lee, S.K. Kim, Mater. Trans. 49, 1081 (2008).
[7] S.H. Ha, B.H. Kim, Y.O. Yoon, H.K. Lim, T.W. Lee, S.H. Lim, S.K. Kim, Int. J. Metalcast. 13, 121 (2019).
[8] J.W. Jeong, J.S. Im, K. Song, M.H. Kwon, S.K. Kim, Y.B. Kang, S.H. Oh, Acta Mater. 61, 3267 (2013).
[9] K. Ozturk, L.Q. Chen, Z.K. Liu, J. Alloys Compd. 340, 199 (2002).
[10] C.W. Bale, E. Bélisle, P. Chartrand, S.A. Decterov, G. Eriksson, A.E. Gheribi, K. Hack, I.H. Jung, Y.B. Kang, J. Melançon, A.D. Pelton, S. Petersen, C. Robelin, J. Sangster, P. Spencer, M.A. Van Ende, Calphad 54, 35 (2016).
Go to article

Authors and Affiliations

Seong-Ho Ha
1
ORCID: ORCID
Young-Chul Shin
1
ORCID: ORCID
Bong-Hwan Kim
1
ORCID: ORCID
Young-Ok Yoon
1
ORCID: ORCID
Hyun-Kyu Lim
1
ORCID: ORCID
Sung-Hwan Lim
2
ORCID: ORCID
Shae K. Kim
1
ORCID: ORCID

  1. Korea Institute of Industrial Technology (KITECH), Incheon 21999, Republic of Korea
  2. Kangwon National University, Department of Advanced Materials Science and Engineering, Chuncheon 24341, Republic of Korea

This page uses 'cookies'. Learn more