[1] A. Borri, M. Corradi, “Strengthening of timber beams with high strength steel cords”, Composites: Part B, vol. 42, no. 6, pp. 1480–1491, 2011. https://doi.org/10.1016/j.compositesb.2011.04.051
[2] A. Borri, M. Corradi, A. Grazini, “A method for flexural reinforcement of old wood beams with CFRP materials”, Composites: Part B, vol. 36, no. 2, pp. 143–153, 2005. https://doi.org/10.1016/j.compositesb.2004.04.013
[3] A. D’Ambrisi, F. Focacci, R. Luciano, “Experimental investigation on flexural behavior of timber beams repaired with CFRP plates”, Composite Structures, vol. 108, pp. 720–728, 2014. https://doi.org/10.1016/j.compstruct.2013.10.005
[4] A. De Jesus, J. Pinto, J. Morais, “Analysis of solid wood beams strengthened with CFRP laminates of distinct lengths”, Construction and Building Materials, vol. 35, pp. 817–828, 2012. https://doi.org/10.1016/j.conbuildmat.2012.04.124
[5] B. Anshari, Z.W. Guan, A. Kitamori, K. Jung, K. Komatsu, “Structural behaviour of glued laminated timber beams pre-stressed by compressed wood”, Construction and Building Materials, vol. 29, pp. 24–32, 2012. https://doi.org/10.1016/j.conbuildmat.2011.10.002
[6] E.R. Thorhallsson, G.I. Hinriksson, J.T. Snæbj€ornsson, “Strength and stiffness of glulam beams reinforced with glass and basalt fibres”, Composites: Part B, vol. 115, pp. 300–307, 2016. https://doi.org/10.1016/j.compositesb.2016.09.074
[7] F.H. Theakston, “A feasibility study for strengthening timber beams with fiberglass”, Canadian agricultural engineering, 1965, pp. 17-19.
[8] G.M. Raftery, A.M. Harte, “Low-grade glued laminated timber reinforced with FRP plate”, Composites: Part B, vol. 42, no. 4, pp. 724–735, 2011. https://doi.org/10.1016/j.compositesb.2011.01.029
[9] G.M. Raftery, F. Kelly, “Basalt FRP rods for reinforcement and repair of timber”, Composites: Part B, vol. 70, pp. 9–19, 2015. https://doi.org/10.1016/j.compositesb.2014.10.036
[10] H. Gezer, B. Aydemir, “The effect of the wrapped carbon fiber reinforced polymer material on fir and pine woods”, Materials and Design, vol. 31, no. 7, pp. 3564–3567, 2010. https://doi.org/10.1016/j.matdes.2010.02.031
[11] H. Yang, D. Ju, W. Liu, W. Lu, “Prestressed glulam beams reinforced with CFRP bars”, Construction and Building Materials, vol. 109, pp. 73–83, 2016. https://doi.org/10.1016/j.conbuildmat.2016.02.008
[12] H. Yang, W. Liu, W. Lu, S. Zhu, Q. Geng, “Flexural behavior of FRP and steel reinforced glulam beams, Experimental and theoretical evaluation”, Construction and Building Materials, vol. 106, pp. 550–563, 2016. https://doi.org/10.1016/j.conbuildmat.2015.12.135
[13] I. Glišović, B. Stevanović, M. Todorović, T. Stevanović, “Glulam beams externally reinforced with CFRP plates”, Wood research, vol. 61, no. 1, pp. 141–154, 2016.
[14] J.A. Balmori, L.A. Basterra, L. Acuña, “Internal GFRP Reinforcement of Low-Grade Maritime Pine Duo Timber Beams”, Materials, vol. 13, no. 3, 571, 2020. https://doi.org/10.3390/ma13030571
[15] J. Soriano, B.P. Pellis, N.T. Mascia, “Mechanical performance of glued-laminated timber beams symmetrically reinforced with steel bars”, Composite Structures, vol. 150, pp. 200–207, 2016. https://doi.org/10.1016/j.compstruct.2016.05.016
[16] K. Andor, A. Lengyel, R. Polgár, T. Fodor, Z. Karácsonyi, “Experimental and statistical analysis of spruce timber beams reinforced with CFRP fabric”, Construction and Building Materials, vol. 99, pp. 200–207, 2015. https://doi.org/10.1016/j.conbuildmat.2015.09.026
[17] L.A. Basterra, J.A. Balmori, L. Morillas, L. Acuña, M. Casado, “Internal reinforcement of laminated duo beams of low-grade timber with GFRP sheets”, Construction and Building Materials, vol. 154, pp. 914–920, 2017. https://doi.org/10.1016/j.conbuildmat.2017.08.007
[18] L. Rudziński, “Konstrukcje drewniane. Naprawy, wzmocnienia, przykłady obliczeń”, Skrypt Politechniki Świętokrzyskiej, Kielce, 2010.
[19] L. Ye, B. Wang, P. Shao, “Experimental and Numerical Analysis of a Reinforced Wood Lap Joint”, Materials, vol. 13, no. 18, 4117, 2020. https://doi.org/10.3390/ma13184117
[20] M. Bakalarz, P. Kossakowski, “Mechanical Properties of Laminated Veneer Lumber Beams Strengthened with CFRP Sheets”, Archives of Civil Engineering, vol. 65, no. 2, pp. 57–66, 2019. https://doi.org/10.2478/ace-2019-0018
[21] M. Bakalarz, P. Kossakowski, “The flexural capacity of laminated veneer lumber beams strengthened with AFRP and GFRP sheets”, Technical Transactions, vol. 2, pp. 85–95, 2019. https://doi.org/10.4467/2353737XCT.19.023.10159
[22] M.M. Bakalarz, P.G. Kossakowski, P. Tworzewski, “Strengthening of Bent LVL Beams with Near-Surface Mounted (NSM) FRP Reinforcement”, Materials, vol. 13, no. 10, pp. 1–12, 2020. https://doi.org/10.3390/ma13102350
[23] M. Corradi, A. Borri, “Fir and chestnut timber beams reinforced with GFRP pultruded elements”, Composites: Part B, vol. 38, no. 2, pp. 172–181, 2007. https://doi.org/10.1016/j.compositesb.2006.07.003
[24] M. Dudziak, I. Malujda, K. Talaśka, T. Łodygowski, W. Sumelka, “Analysis of the process of wood plasticization by hot rolling”, Journal of Theoretical and Applied Mechanics, vol. 54, no. 2, pp. 503–516, 2016. https://doi.org/10.15632/jtam-pl.54.2.503
[25] M. Fossetti, G. Minafò, M. Papia, “Flexural behaviour of glulam timber beams reinforced with FRP cords”, Construction and Building Materials, vol. 95, pp. 54-64, 2015. https://doi.org/10.1016/j.conbuildmat.2015.07.116
[26] P. De La Rosa, A. Cobo, M.N. González García, “Bending reinforcement of timber beams with composite carbon fiber and basalt fiber materials”, Composites: Part B, vol. 55, pp. 528–536, 2013. https://doi.org/10.1016/j.compositesb.2013.07.016
[27] P. De La Rosa García, A.C. Escamilla, M.N. González García, “Analysis of the flexural stiffness of timber beams reinforced with carbon and basalt composite materials”, Composites: Part B, vol. 86, pp. 152–159, 2016. https://doi.org/10.1016/j.compositesb.2015.10.003
[28] P.G. Kossakowski, “Influence of anisotropy on the energy release rate GI for highly orthotropic materials”, Journal of Theoretical and Applied Mechanics, vol. 45, no. 4, pp. 739–752, 2007.
[29] PN-EN 14374:2005 Timber Structures. Structural Laminated Veneer Lumber (LVL). Requirements, Polish Standards Committee: Warsaw, Poland, 2005.
[30] PN-EN 1995-1-1:2010 Eurocode 5, Design of timber structures. Part 1-1: General. Common rules and rules for buildings, Polish Standards Committee: Warsaw, Poland, 2010.
[31] PN-EN 408+A1:2012 Timber Structures. Structural Timber and Glued Laminated Timber. Determination of Some Physical and Mechanical Properties, Polish Standards Committee: Warsaw, Poland, 2012.
[32] PN-EN 527-1:2012 Plastics. Determination of tensile properties. Part 1: General principles, Polish Standards Committee: Warsaw, Poland, 2013.
[33] PN-EN 527-5:2010 Plastics. Determination of tensile properties. Part 5: Test conditions for unidirectional fibre-reinforced plastic composites, Polish Standards Committee: Warsaw, Poland, 2010.
[34] T.P. Nowak, J. Jasieńko, D. Czepiżak, “Experimental tests and numerical analysis of historic bent timber elements reinforced with CFRP strips”, Construction and Building Materials, vol. 40, pp. 197–206, 2013. https://doi.org/10.1016/j.conbuildmat.2012.09.106
[35] V. De Luca, C. Marano, “Prestressed glulam timbers reinforced with steel bars”, Construction and Building Materials, vol. 30, pp. 206–217, 2012. https://doi.org/10.1016/j.conbuildmat.2011.11.016
[36] Y. Nadir, P. Nagarajan, M. Ameen, M. Arif M, “Flexural stiffness and strength enhancement of horizontally glued laminated wood beams with GFRP and CFRP composite sheets”, Construction and Building Materials, vol. 112, pp. 547–555, 2016. https://doi.org/10.1016/j.conbuildmat.2016.02.133
[37] Y.-F. Li, M.-J. Tsai, T.-F. Wei, W.-C. Wang, “A study on wood beams strengthened by FRP composite materials”, Construction and Building Materials, vol. 62, pp. 118–125, 2014. https://doi.org/10.1016/j.conbuildmat.2014.03.036
[38] Y.-F. Li, Y.-M. Xie, M.-J. Tsai, “Enhancement of the flexural performance of retrofitted wood beams using CFRP composite sheets”, Construction and Building Materials, vol. 23, pp. 411–422, 2009. https://doi.org/10.1016/j.conbuildmat.2007.11.005
[39] Z.W. Guan, P.D. Rodd, D.J. Pope, “Study of glulam beams pre-stressed with pultruded GRP”, Computers and Structures, vol. 83, pp. 2476–2487, 2005. https://doi.org/10.1016/j.compstruc.2005.03.021

[1] Cz. Machelski, “Modeling of soil–steel composite bridges” [in Polish], 1nd ed., Dolnośląskie Wydawnictwo Edukacyjne, Wrocław, 2008.
[2] A. Wysokowski and L. Janusz, “Soil steel composite bridges. Laboratory destructive testing. Failures during construction and operation” [in Polish], in Proceedings of Conference XXIII Konferencja Naukowo – Techniczna Awarie Budowlane – 23rd International Conference on Structural Failures, Szczecin-Międzyzdroje, 2007, pp. 541–550.
[3] A. Wysokowski and J. Vaslestadt, “Full scale fatigue testing of large-diameter multi-plate corrugated steel culverts”, Archives of Civil Engineering, vol. 48, no. 1, pp. 31–57, 2002.
[4] A. Wysokowski, J. Vaslestad and A. Pryga, “Fatigue resistance of modern corrugated steel culverts” [in Polish], Konstrukcje Stalowe, no. 5, pp. 45–47, 2000.
[5] A. Wysokowski and J. Howis, “Operational durability of steel soil-shell structures as ecological bridges” [in Polish], in Proceedings of Conference XXVII Konferencja Naukowo – Techniczna Awarie Budowlane – 27th International Conference on Structural Failures, Szczecin-Międzyzdroje, 2017, pp. 879–890.
[6] D. Bęben, “Soil-steel bridge structures design problems and construction faults” [in Polish], Drogownictwo, no. 3, pp. 74–79, 2013.
[7] Cz. Machelski, L. Korusiewicz, “Deformation of buried corrugated metal box structure under railway load”, Roads and Bridges – Drogi i Mosty, vol. 16, no. 3: pp. 191–201, 2017. https://doi.org/10.7409/rabdim.017.013
[8] Cz. Machelski, “Steel plate curvatures of soil-steel structures during construction and exploitation”, Roads and Bridges – Drogi i Mosty, vol. 15, no. 3, pp. 207–220, 2016. https://doi.org/10.7409/rabdim.016.013
[9] L. Korusiewicz, “Verification of the method of estimating bending moments in soil-shell structures on the basis of shell deformation”, Roads and Bridges – Drogi i Mosty, vol. 15, no. 3, pp. 221–230, 2016. https://doi.org/10.7409/rabdim.016.014
[10] J. Howis and A. Wysokowski, “Culverts in the communication infrastructure – part 9. Methods for calculating culverts – part III. New calculation methods" [in Polish], Nowoczesne Budownictwo Inżynieryjne, no. 5, pp. 72–81, 2010.
[11] L. Pettersson and H. Sundquist, “Design of soil steel composite bridges”, Trita-BKN, Report 112, 5th Edition, Royal Institute of Technology, Department of Structural Design and Bridges, Stockholm, Sweden, 2014.
[12] PN-EN 1997-1:2008. Projektowanie geotechniczne. Część 1: Zasady ogólne.
[13] PN-EN 1997-2:2009. Projektowanie geotechniczne. Część 2: Rozpoznanie i badanie podłoża gruntowego.
[14] L. Janusz and A. Madaj, “Engineering objects made of corrugated sheets. Design and construction” [in Polish], 1nd ed., Wydawnictwo Komunikacji i Łączności, Warszawa, 2007.
[15] W. Rowińska, A. Wysokowski and A. Pryga, “Design and technological recommendations for engineering structures made of corrugated sheets” [in Polish], 1nd ed., Generalna Dyrekcja Dróg Krajowych i Autostrad, IBDiM, Żmigród, 2004.
[16] D. Bęben, “Soil-steel bridges. Design, maintenance and durability”, 1nd ed., Springer, Cham, 2020.
[17] A. Wysokowski and J. Howis, “Culverts in the communication infrastructure – part 1” [in Polish], Nowoczesne Budownictwo Inżynieryjne, no. 2, pp. 52–56, 2008.
[18] L. Pettersson, “Full scale tests and structural evaluation of soil steel flexible culverts with low height of cover”, PhD Thesis, Royal Institute of Technology, Department of Structural Design and Bridges, Stockholm, Sweden, 2007.
[19] PN-EN 1993-1-1:2006. Projektowanie konstrukcji stalowych. Część 1–1: Reguły ogólne i reguły dla budynków.
[20] L. Pettersson, “Design of soil steel composite bridges according to the Eurocode”, Archives of Institute of Civil Engineering, no. 12, pp. 21–25, 2012.
[21] PN-EN 1993-1-8:2008. Projektowanie konstrukcji stalowych. Część 1–8: Projektowanie węzłów.
[22] PN-EN 1991-2:2007. Oddziaływania na konstrukcje. Część 2: Obciążenia ruchome mostów.
[23] PN-EN 1993-1-9:2008. Projektowanie konstrukcji stalowych. Część 1–9: Zmęczenie.
[24] PN-EN 1993-2:2007. Projektowanie konstrukcji stalowych. Część 2: Mosty stalowe.
[25] www.viacon.pl (access: November 6, 2020).
[26] PN-EN 1990:2004. Podstawy projektowania konstrukcji.
[27] P. G. Kossakowski, “Fatigue Strength of an Over One Hundred Year Old Railway Bridge”, Baltic Journal of Road and Bridge Engineering, vol. 8, no. 3, pp. 166–173, 2013. https://doi.org/10.3846/bjrbe.2013.21
[28] P. G. Kossakowski, “Influence of Initial Porosity on Strength Properties of S235JR Steel at Low Stress Triaxiality”, Archives of Civil Engineering, vol. 58, no. 3, pp. 293–308, 2021. https://doi.org/10.2478/v.10169-012-0017-9
[29] P. G. Kossakowski, “Experimental Determination of the Void Volume Fraction For S235JR Steel at Failure in the Range of High Stress Triaxialities”, Archives of Metallurgy and Materials, vol. 62, no. 1, pp. 167–172, 2017. https://doi.org/10.1515/amm-2017-0023
[30] P. G. Kossakowski, “Analysis of the Void Volume Fraction For S235JR Steel at Failure for Low Initial Stress Triaxiality”, Archives of Civil Engineering, vol. 64, no. 1, pp. 101–115, 2018. https://doi.org/10.2478/ace-2018-0007
[31] P. G. Kossakowski, “Application of Damage Mechanics for Prediction of Failure of Structural Materials and Elements”, DEStech Transactions on Computer Science and Engineering, pp. 62–72, 2020. https://doi.org/10.12783/dtcse/msam2020/34228
[32] E. Bernatowska, “Numerical Simulations of Ductile Fracture in Steel Angle Tension Members Connected with Bolts”, Civil and Environmental Engineering Reports, vol. 30, no. 2, pp. 32–54, 2020. https://doi.org/10.2478/ceer-2020-0018