Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 2
items per page: 25 50 75
Sort by:
Download PDF Download RIS Download Bibtex

Abstract

In the presented work, the numerical simulations results of the liquid steel flow in the one strand tundish were shown. Influence of the modification and immersion depth in the liquid steel of the ladle shroud and subflux turbulence controller on hydrodynamic structure of the liquid steel movement in the working space of tundish were examined. The ladle shroud shape modification consisted on the decompression and compression of the main supplying stream of the tundish. The mathematical model used in the numerical simulations through physical modeling and industrial trials were validated. The numerical simulation results (using four variants of the modified ladle shroud immersion depth in the liquid steel) in the isothermal conditions using laboratory experiments on the water model were verified. Whereas, the numerical simulation results (using one of the tundish research variant) for non-isothermal were compared with the results from the industrial measurements. Three turbulence models: Realizable k-ε, RNG k-ε and SST k-ω were used in the computer calculations (performed via the Ansys-Fluent computer program). In order to obtain the actual view of the liquid steel flow hydrodynamic structure in the examined tundish for the two mathematical models using different turbulence models, which were most similar to the laboratory experiments and industrial measurements, the numerical simulations were performed in the non-isothermal conditions. The application in the computer calculations of the SST k-ω turbulence model caused the smallest differences between the numerical simulations, laboratory experiments and industrial measurements. Performed tests showed that ladle shroud can be used as a flow control device and the modified ladle shroud immersion at a depth of 0.1 m in the liquid steel caused the shortest range of the transition zone among the tested cases.

Go to article

Authors and Affiliations

M. Bartosiewicz
A. Cwudziński
ORCID: ORCID
Download PDF Download RIS Download Bibtex

Abstract

In this work, the authors proposed a modification of the working space one-strand tundish adapted for slab casting process. Numerical simulations of liquid steel flow in the considered flow reactor were performed. The tundish is equipped with a dam with a multi-hole filter. Two variants of the filter hole arrangement were tested and their effect on the liquid steel flow hydrodynamic structure in the tundish was examined. The computer calculations results were verified by performing experiments on the water model. The result of numerical and physical simulations an RTD (Residence Time Distribution) type F curve was generated, which define the transition zone between the cast steel grades during the sequential casting process. The results of the researches showed that the modification of a dam with a multi-hole filter affects on the formation of the liquid steel flow hydrodynamic structure and the transition zone. Furthermore, examinations of the liquid steel refining ability in the considered tundish were carried out. The influence of the filter holes arrangement on the non-metallic inclusions flotation process to the slag phase and liquid steel filtration processes was checked. Numerical simulations were performed in the Ansys-Fluent computer program.

Go to article

Authors and Affiliations

M. Bartosiewicz
A. Cwudziński

This page uses 'cookies'. Learn more