The aim of this research was to fabricate and study the properties of Bi1-x DyxFeO3 (for x = 0, 0.05, 0.07, 0.1) ceramics materials. Simple oxide powders Bi2O3, Dy2O3 and Fe2O3 were used to fabricate Bi1-xDyxFeO3 ceramics by mixed oxide method followed by free sintering. The study presents changes in microstructure and crystal structure as well as in dielectric properties and magnetic properties caused by modification of BiFeO3 with dysprosium dopant.

The paper reports the consequences of lanthanum modifications of barium bismuth niobiate (BaBi2Nb2O9) ceramics. The discussed materials were prepared by solid state synthesis and a one-step sintering process. The investigations are focused on dielectric aspects of the modification. The presented results reveal that the trivalent lanthanum ions incorporate twovalent barium ions, which is connected with the creation of A-site cationic vacancies as well as oxygen vacancies. Such a scenario results in significant decreasing in grain boundaries resistivity. The activation energy of grain boundaries conductivity is significantly reduced in the case of lanthanum admixture.

Aurivillius Bi5Ti3FeO15 (BTF) and Bi5-xNdxTi3FeO15 (BNTF) ceramics were successfully synthesized by a simple solid state reaction method. Ceramics were prepared from simple oxide powders Bi2O3, TiO­2, Nd2O3 and Fe2O3. The microstructure, structure, chemical composition and dielectric properties of the obtained materials were examined. Dielectric properties were investigated in a wide range of temperatures (T = 25ºC-550ºC) and frequencies (20Hz-1MHz).

Aurivillius Bi5-xHoxTi3FeO15 (BHTFO) multiferroic ceramics with different holmium doping contents were synthesized by conventional solid state reaction. The effect of holmium doping on the microstructure, structural and dielectric behaviors of BHTFO ceramics were investigated in details. Microstructure and crystalline structure studies of ceramics were carried out at room temperature while dielectric properties were investigated in a wide range of temperature (T = 25ºC-550ºC) and frequency (20Hz-1MHz).

La0,7Ca0,3MnO3 polycrystalline were synthesized from La2O3, CaO and MnO2 powder mixture using a solid state reaction technique. The compound powders were obtained through the free sintering method at different temperatures and sintering times in order to study the influence of technological conditions on Ca doped La manganites. The most important physical features as structure, microstructure and morphology were described after X-ray diffraction investigation. Photographs of the specimen fractures were taken with SEM (scanning electron microscope) and they revealed high porosity of the tested material and great tendency for its grains to create agglomerates. Influence of doping and technological conditions on lattice parameters were studied by means of Rietvield analysis. The XRD measurements reveal that La0,7Ca0,3MnO3 has orthorhombic symmetry with Pnma space group.