Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 3
items per page: 25 50 75
Sort by:
Download PDF Download RIS Download Bibtex

Abstract

In the present work TiO2 nanoparticles (NPs) have been dispersed into three different nematic liquid crystals (2020, 1823A and 1550C) in different concentration. The value of the birefringence (Δn) has been calculated by the transmitted intensity method at a 632.8 nm wavelength. NLC 2020 used in the present study is a high birefringent material (Δn = 0.44), NLC 1550C is a low birefringent material (Δn = 0.067) and NLC 1823A is a mid birefringent material (Δn = 0.14). An increased value of birefringence has been found after dispersion of TiO2 NPs in all three NLCs but this increment depends upon the concentration of the dopant material, temperature range and chemical character of the mixtures. It is suggested that this LC materials can be applicable in making of phase shifters, compensators and many more photonic devices.

Go to article

Authors and Affiliations

G. Pathak
R. Katiyar
K. Agrahari
A. Srivastava
R. Dabrowski
K. Garbat
R. Manohar
Download PDF Download RIS Download Bibtex

Abstract

In the present investigation optical, electro-optical and dielectric properties have been measured for nematic liquid crystal (NLC) material 1550C which consists of 4’-(trans, trans-4-alkylbicyclohexyl) carbonates and 4’-(4-(trans,trans-4-alkyl)-4-cyanobicyclohexane, dispersed with fluorescent dye (Benzo 2,1,3 Thiadiazole) in two different concentrations. Photoluminescence has been enhanced for a dye dispersed system which is the key finding of this investigation. UV absorbance study has also been performed and found to be increased for composite system. Enhanced birefringence after dispersion of dye into pure NLC is also a prominent result of this investigation. Relative permittivity, threshold voltage and dielectric anisotropy have also been measured and found to be increased. The outcome of the present work may be very useful in the construction of liquid crystal displays (LCDs).

Go to article

Authors and Affiliations

G. Pathak
K. Agrahari
A. Roy
A. Srivastava
O. Strzezysz
K. Garbat
R. Manohar
Download PDF Download RIS Download Bibtex

Abstract

There exists a need in a quality and accuracy of a three-dimensional laser metrology operating in numerically controlled automatic machines. For this purpose, one sends three laser beams mutually perpendicular. These three beams of the wavelength λ = 0.6328 μm are generated by the same laser and are directed along three independent, orthogonal, mutually perpendicular, optical paths with a given light polarization plain. Using these beams, constituting the frame of coordinates, three independent laser rangefinders are able to determine spatial coordinates of a working tool or a workpiece. To form these optical pulses, a special refractive index matched Half-Wave Plate with nematic Liquid Crystal (LCHWP) was applied. The presented half-wave plate is based on a single Twisted Nematic (TN) cell (with the twist angle Φ = π/2) of a rather high cell gap d ~15 μm filled with a newly developed High-Birefringence Nematic Liquid Crystal Mixture (HBLCM) of optical anisotropy as high as Δn ~0.40 at λ = 0.6328 μm, where the Mauguin limit above 5.00 ~ Δnd >> λ/2 = 0.32 is fulfilled.

Go to article

Authors and Affiliations

W. Piecek
L.R. Jaroszewicz
ORCID: ORCID
E. Miszczyk
Z. Raszewski
M. Mrukiewicz
P. Perkowski
E. Nowinowski-Kruszelnicki
J. Zieliński
M. Olifierczuk
J. Kędzierski
X.W. Sun
K. Garbat
K. Kowiorski
P. Morawiak
R. Mazur
J. Tkaczyk

This page uses 'cookies'. Learn more