The European standards, developed extensively over last 30 years, are driven by the need for continuous evolution and their Authors’ pursuit of better EU-wide quality in civil engineering – combining safety, economy, and sustainable development. The adoption of theory of reliability as the basis for design has played a major role in shaping current geotechnical practice. However, it requires from practitioners a greater understanding of underlying uncertainties. Furthermore, a number of alternative approaches, not generally used in structural design, are also allowed, as some situations in geotechnical engineering require an individual approach. Moreover, the current trends in geoengineering increase the importance of risk assessment and management. The paper presents general philosophy guiding the geotechnical design and pointing to some of the ideas introduced by Eurocode 7 and its requirements, in relation to preexisting practice of geotechnical design in civil engineering.

Increasingly complex design systems require an individual approach when determining the necessary design parameters. As soils are characterized by strong strain-dependent nonlinearity, test methods used to characterize the subsoil should be carefully selected, in terms of their "sensitivity" as well as suitability for the analyzed type of problem. When direct measurements are not available, while design calculation models require specific parameters, indirect parameter estimation may be used. This approach requires calibration and validation of empirical correlations, based on well documented database of tests and case studies. One of the parameters often used, when analyzing soil-structure interaction problems, is the shear stiffness of the soil and its strain-dependent degradation. The aim of the article is to present the procedure for description and evaluation of soil stiffness based on field tests (CPTU, DMT and SDMT) and a large number of reference curves obtained from laboratory tests (TRX) for selected soil types. On the basis of the given algorithm, it is possible to obtain a stiffness module G0 value at any level of deformation, based on in-situ tests.