The aim of the study was to identify acoustic and structural modes in the spectrum obtained exper-imentally inside an operator's cab in a bulldozer. Measurements were taken inside the operator's cab in a caterpillar-track bulldozer Polremaco TD12NPH2E-2000, designed for work in underground mine enclosures. The acoustic pressure spectrum was obtained for varied rotational speeds of the engine during the free run of the machine. The reverberation time of the cab was determined basing on the pulse-type excited pressure response, followed by identification of the spectral components registered by measurements. Thus, identified frequencies were compared with natural acoustic frequencies registered inside the operator's cab and with frequencies associated with the valves and ignition frequencies due to rotational speed and natural frequencies of structural vibrations of the cab's walls. This study was conducted in an attempt to reduce the noise inside the operator's cab using passive methods

Beams with rectangular cross-section, with large length-to-width ratio, can be excited to torsional vibrations. If the piezoelectric elements are mounted to the beam in pairs at the same cross-section with two separated elements positioned on the same side of the beam, and the voltages applied to them are in the opposite phase, they produce twisting moments which can be applied to reduce the torsional vibrations. Results of FEM simulations are presented and analysed in the paper. All analyses are performed for a steel free-clamped beam. The piezoelectric elements made of PZT material are mounted in pairs on one side of the beam. The analyses are done for separated natural modes.