Having increasingly tightened geological and mining conditions in which the extraction of copper ore deposits in Poland is conducted, ensuring effective and safe mining is presently becoming a key task and a significant challenge for mine operators, mainly in the field of ground support systems being the equivalent for the new geological/mining conditions. As one may expect, these conditions shall be characterized by higher values of the primary stress tensor elements as well as the lower deformability and higher strength of the rock mass surrounding the copper ore body. T his means that in the near future, the rock bursts problem will become one of the most important issues deciding on the economy and safety within the newly developed mining areas. T herefore developing a novel effective ductile ground support systems which could be able to control the rock mass movement in squeezing and burst-prone rock conditions is recommended. T his type of requirement may fulfil only ductile or, in other words, the kinetic energy-absorbing systems, which permit slowing down a movement of violently ejected rock blocks. T his paper’s objective is to present the idea of the development of a new type of an effective and low cost ductile resin anchored rockbolt system with smooth and of the square cross-section steel rod is formed in coil shape of different pitch. T he developed bolt prototypes have been tested underground in the G-11 section of the Rudna mine. Results of the pull-out tests, involving different bolts’ shapes and different sliding materials set on the rockbolts’ rods, have proved those bolts’ efficiency as an element of the ductile support system.

A proper description of ground motions generated by seismic and paraseismic events requires gathering data of six components of seismic waves. T hree of them, the so called translational waves, are well researched and identified. Unfortunately, until recently, the remaining three components named as rotational waves were generally estimated with the use of indirect methods based on theoretical calculations. T his was related mostly with the lack of proper instruments for the recording of rotational seismic waves. T hus, rotational waves were not fully recognized thus far. Recently, several types of advanced instruments for direct measurements of rotation were invented. Based on the measurements of strong ground motions it was indicated that the amplitude of the rotational components in close distances from the seismic source can be significantly larger than expected. Apart from this, there is still a lack of analyses considering the characteristic of rotational seismic waves generated by induced seismic events. In this paper, the results of preliminary measurements of rotational motions generated by induced seismic waves were presented. Ground movements related with mining tremors were analyzed in terms of amplitude, frequency and duration.