Search results

Filters

  • Journals

Search results

Number of results: 5
items per page: 25 50 75
Sort by:
Download PDF Download RIS Download Bibtex

Abstract

Studies were carried out to determine the effect of heat treatment parameters on the plastic properties of unalloyed ausferritic ductile iron,

such as the elongation and toughness at ambient temperature and at – 60 °C. The effect of austenitizing temperature (850, 900 and 950°C)

and ausferritizing time (5 - 180 min.) at a temperature of 360°C was also discussed. The next step covered investigations of

a relationship that is believed to exist between the temperature (270, 300, 330, 360 and 390 °C) and time (5, 10, 30, 60, 90, 120, 150, 180,

240 min.) of the austempering treatment and the mechanical properties of unalloyed ausferritic ductile iron, when the austenitizing

temperature is 950°C. The “process window” was calculated for the ADI characterized by high toughness corresponding to the EN-GJS800-10-RT

and EN-GJS-900-8 grades according to EN-PN 1564 and to other high-strength grades included in this standard. Low-alloyed

cast iron with the nodular graphite is an excellent starting material for the technological design of all the ausferritic ductile iron grades

included in the PN-EN-1624 standard. The examined cast iron is characterized by high mechanical properties stable within the entire range

of heat treatment parameters.

Go to article

Authors and Affiliations

E. Guzik
M. Sokolnicki
A. Nowak
Download PDF Download RIS Download Bibtex

Abstract

The results of studies on the use of magnesium alloy in modern Tundish + Cored Wire injection method for production of vermicular graphite cast irons were described. The injection of Mg Cored Wire length is a treatment method which can be used to process iron melted in an electric induction furnace. This paper describes the results of using a high-magnesium ferrosilicon alloy in cored wire for the production of vermicular graphite cast irons at the; Tundish + Cored Wire to be injected methods (PE) for pearlitic-ferritic matrix GJV with about 25 %ferrite content. The results of calculations and experiments have indicated the length of the Cored Wire to be injected basing on the initial sulfur content and weight of the treated melt. The paper presents a microstructure matrix and vermicular graphite in standard sample and different walled castings. The results of numerous trials have shown that the magnesium Tundish + PE Method process can produce high quality vermicular graphite irons under the specific industrial conditions of the above mentioned foundries.

Go to article

Authors and Affiliations

E. Guzik
D. Kopyciński
T. Kleingartner
M. Sokolnicki
Download PDF Download RIS Download Bibtex

Abstract

The results of studies on the use of magnesium alloy in modern Tundish for production of vermicular graphite cast irons were described. This paper describes the results of using a low-magnesium ferrosilicon alloy for the production of vermicular graphite cast irons. The paper presents a vermicular (and nodular) graphite in different walled castings. The results of trials have shown that the magnesium Tundish process can produce high quality vermicular graphite irons under the specific industrial conditions of Foundries - Odlewnie Polskie S.A. in Starachowice. In this work describes too preliminary studies on the oxygen state in cast iron and their effect on graphite crystallization.

Go to article

Authors and Affiliations

D. Kopyciński
E. Guzik
A. Nowak
M. Ronduda
M. Sokolnicki
Download PDF Download RIS Download Bibtex

Abstract

The paper presents results of the possibility of adapting the Althoff-Radtke test for High Chromium Cast Iron. The Althoff-Radtke test is a

clump attempt used for steel. The Althoff-Radtke test has four different lengths of clamp which qualifies it as a test to quantitatively take

into account different kinds of shrinkage ΔL. The length of the slot of the cracked corner and the length of each staple (50 - 350 mm) are

the parameters tendency to cast cracks. Castings of white cast iron have a high tendency to hot cracking due to the large range of

solidification temperatures, unfavorable kinetics parameters of shrinkage, and especially a lack of expansion before shrinkage. Shrinkage

of high chromium white cast iron is similar to the shrinkage of cast steel, and is approximately 2%. Therefore it is important to test

susceptibility to hot cracks. Research was carried out under industrial conditions. Four melts were performed, one of the initial chemical

composition and the other three modified by different amounts of Fe-Ti, respectively, 0.25%, 0.5% and 0.75% Fe-Ti. The propensity for

hot cracking was based on the observation of the dark surface in the corner of the sample. The study shows that the Althoff-Radtke test can

be adapted to determine the tendency for hot cracking of high chromium cast iron. It should however be noted that the test results cannot be

compared with those for other alloys.

Go to article

Authors and Affiliations

D. Kopyciński
D. Siekaniec
A. Szczęsny
M. Sokolnicki
A. Nowak

This page uses 'cookies'. Learn more