Considering the advantages of hollow fiber supported liquid membrane (HFSLM), it has been applied for extraction of Co(II) with a motivation to extract cobalt from various waste resources. Extraction efficiency and transport behavior of Co(II) through HFSLM containing Cyanex 272 diluted in kerosene were investigated. Experiments were performed as a function of aqueous feed solution velocity (1000 mL/min) for both feed and strip, pH of feed solution in the range of 4.00-6.75, the carrier concentration of 25-1000 mol/m3, and acid concentration in strip solution of 1-500 mol/m3on. The mass transfer rate or flux JCo(II), which is a function of metal concentration, volume of solution, and membrane area were analyzed. The optimum condition for extraction of Co(II) was pH of 6.00, Cyanex 272 concentration of 500 mol/m3 and H2SO4 concentration of 100 mol/m3.

FeCl3 bearing etching solution is mainly used for etching of metals used in shadow masks, PCBs and so on. Due course of Invar alloy etching process the FeCl3 bearing etching solution get contaminated with Ni2+ which affect adversely the etching efficiency. Hence, FeCl3 bearing etching solution discarded after several cycle of operation causes an environmental and economic problem. To address both the issues the etching solution was purified through solvent extraction and remained Ni2+ recovered by wet chemical reduction using hydrazine. For optimum Fe3+ extraction efficiency, various extraction parameter were optimized and size and morphology of the recovered pure Ni powder was analyzed. The reported process is a simple process to purify and recover Ni from industry etching solution.