The objective of the paper was the hydrological analysis, in terms of categorizing main watercourses (based on coupled catchments) and marking areas covered by potential impact of the occurrence and activities of the European beaver Castor fi ber . At the analysed area – the Forest District Głogów Małopolski there is a population of about 200 beavers in that Forest District. Damage inflicted by beavers was detected on 33.0 ha of the Forest District, while in the area of 13.9 ha the damage was small (below 10%). The monitoring of the beavers’ behaviour and the analysis of their influence on hydrology of the area became an important element of using geoinformationtools in the management of forest areas. ArcHydro ArcGIS Esri module was applied, as an integrated set of tools for hydrographical analysis and modelling. Further steps of the procedure are hydrologic analyses such as: marking river networks on the DTM, filling holes, making maps of the flow direction, making the map of the accumulation flow, defining and segmentation of streams, marking elementary basins, marking coupled basins, making dams in the places, where beavers occur and localization of the area with a visible impact of damming. The result of the study includes maps prepared for the Forest District: the map of main rivers and their basins, categories of watercourses and compartments particularly threatened by beaver’s foraging.

The research investigates the possibility of applying Sentinel-2, PlanetScope satellite imageries, and LiDAR data for automation of land cover mapping and 3D vegetation characteristics in post-agricultural areas, mainly in the aspect of detection and monitoring of the secondary forest succession. The study was performed for the tested area in the Biskupice district (South of Poland), as an example of an uncontrolled forest succession process occurring on post-agricultural lands. The areas of interest were parcels where agricultural use has been abandoned and forest succession has progressed. This paper indicates the possibility of automating the process of monitoring wooded and shrubby areas developing in post-agricultural areas with the help of modern geodata and geoinformation methods. It was verified whether the processing of Sentinel-2, PlanetScope imageries allows for reliable land cover classification as an identification forest succession area. The airborne laser scanning (ALS) data were used for deriving detailed information about the forest succession process. Using the ALS point clouds vegetation parameters i.e., height and canopy cover were determined and presented as raster maps, histograms, or profiles. In the presented study Sentinel-2, PlanetScope imageries, and ALS data processing showed a significant differentiation of the spatial structure of vegetation. These differences are visible in the surface size (2D) and the vertical vegetation structure (3D).

The purpose of the study was an assessment of LiDAR point clouds for automating the mapping of land use and land cover changes, mainly land abandonment and the process of secondary forest succession. Detailed information about land cover was determined based on airborne laser scanning data. The presented study focuses on the analysis of the spatial range and structure of vegetation. The study area was located in Milicz district in the voivodeship of Lower Silesia – the central west part of Poland. The areas of interest were parcels where agricultural land had been abandoned and forest succession processes had progressed. Analysis of the spatial range of the secondary forest succession was carried out using a reclassified nDSM. Reclassification of the nDSM was done using > 1 m, > 2 m and > 3 m for the pixel values, representing the height of vegetation above the ground. Parameters such as height of vegetation, standard deviation of height and cover density were calculated, to show the process of the increase in forest succession on abandoned agricultural land. The results confirmed a discrepancy between the cadastral data and the actual use of the plots. In the study area, more than three times as much forested and wooded area was detected than had been recorded in official databases. Analyses based on airborne laser scanning point clouds indicated significant diversity in the vertical and horizontal structure of vegetation. The results demonstrated gradual succession of greenery in the research area.

The purpose of this study was to determine the spatial structure of vegetation on the repository of the mine “Fryderyk” in Tarnowskie Góry. Tested area was located in the Upper Silesian Industrial Region (a large industrial region in Poland). It was a unique refuge habitat – Natura2000; PLH240008. The main aspect of this elaboration was to investigate the possible use of geotechniques and generally available geodata for mapping LULC changes and determining the spatial structure of vegetation. The presented study focuses on the analysis of a spatial structure of vegetation in the research area. This exploration was based on aerial images and orthophotomaps from 1947, 1998, 2003, 2009, 2011 and airborne laser scanning data (2011, ISOK project). Forest succession changes which occurred between 1947 and 2011 were analysed. The selected features of vegetation overgrowing spoil heap “Fryderyk” was determined. The results demonstrated a gradual succession of greenery on soil heap. In 1947, 84% of this area was covered by low vegetation. Tree expansion was proceeding in the westerly and northwest direction. In 2011 this canopy layer covered almost 50% of the research area. Parameters such as height of vegetation, crowns length and cover density were calculated by an airborne laser scanning data. These analyses indicated significant diversity in vertical and horizontal structures of vegetation. The study presents some capacities to use airborne laser scanning for an impartial evaluation of the structure of vegetation.

The aim of this study was to investigate the possible use of geoinformatics tools and generally available geodata for mapping land cover/use on the reclaimed areas. The choice of subject was dictated by the growing number of such areas and the related problem of their restoration. Modern technology, including GIS, photogrammetry and remote sensing are relevant in assessing the reclamation effects and monitoring of changes taking place on such sites. The LULC classes mapping, supported with thorough knowledge of the operator, is useful tool for the proper reclamation process evaluation. The study was performed for two post-mine sites: reclaimed external spoil heap of the sulfur mine Machów and areas after exploitation of sulfur mine Jeziórko, which are located in the Tarnobrzeski district. The research materials consisted of aerial orthophotos, which were the basis of on-screen vectorization; LANDSAT satellite images, which were used in the pixel and object based classification; and the CORINE Land Cover database as a general reference to the global maps of land cover and land use.

The quarrying industry is changing the local landscape, forming deep open pits and spoil heaps in close proximity to them, especially lignite mines. The impact can include toxic soil material (low pH, heavy metals, oxidations etc.) which is the basis for further reclamation and afforestation. Forests that stand on spoil heaps have very different growth conditions because of the relief (slope, aspect, wind and rainfall shadows, supply of solar energy, etc.) and type of soil that is deposited. Airborne laser scanning (ALS) technology deliver point clouds (XYZ) and derivatives as raster height models (DTM, DSM, nDSM=CHM) which allow the reception of selected 2D and 3D forest parameters (e.g. height, base of the crown, cover, density, volume, biomass, etc). The automation of ALS point cloud processing and integrating the results into GIS helps forest managers to take appropriate decisions on silvicultural treatments in areas with failed plantations (toxic soil, droughts on south-facing slopes; landslides, etc.) or as regular maintenance. The ISOK country-wide project ongoing in Poland will soon deliver ALS point cloud data which can be successfully used for the monitoring and management of many thousands of hectares of destroyed post-industrial areas which according to the law, have to be afforested and transferred back to the State Forest.