The paper presents results of coal behaviour during combustion in oxy-fuel atmosphere. The experiment was performed using 3 meter long Entrained Flow Reactor and 1 meter long Drop Tube Reactor. Three hard coals and two lignites were analysed in order to investigate NOx, SO2 emission and fly ash burnout. The measurements were performed along and at the outlet of a combustion chamber for one- and two - stage combustion. In the second stage of the experiment, kinetic parameters for nitrogen evolution during combustion in oxy - fuel and air were calculated and the division of nitrogen into the volatile matter and the char was measured. The conducted experiment showed that emissions in oxy - fuel are lower than those in air.

The presence of inorganic elements in solid fuels is not only considered a direct source of problems in the furnace but is also connected with the release of pollutants into air during combustion. This article focuses on the sintering characteristics of biomass and coal ashes, in particular on the leaching processes, and their impact on the tendency to sinter ash. Biomass and coal ash with high alkali metal concentration can deposit in boiler sections and cause severe operating problems such as slagging, fouling and corrosion of boiler and heat exchanger surface, limiting heat transfer. Two biomass types and one coal ash with different origin and different chemical compositions were investigated. A sequential leaching analysis was employed in this study to elucidate the modes of occurrence of metals that can transform into fuel extract. Sequential leaching analysis was conducted as a two-step process: using distilled water in the first step and acetic acid in the second step. The chemical composition of ashes, before and after each step of the leaching processwas studied using ICP-OES method. The standard Ash Fusion Temperature (AFTs) technique was also employed to assess the sintering tendency of the tested samples. It was observed that the presence of key elements such as sodium, potassium, magnesium and sulphur (elucidated in the leaching process) plays a significant role in sintering process. The sintering tendency enhances when the concentration of these elements increases.