It is proposed to modernize the DVB-S2 standard by using AMMC (amplitude modulation of many components) signals instead of 8PSK (8-phase shift keying) and APSK (amplitude-phase shift keying) signals, and to modernize the DVB-S2 standard equipment by using the AMMC modulator and AMMC demodulator. Usage of AMMC makes it possible to reduce the symbol error rate in communication channel up to 52 times. The satellite digital video broadcast systems that apply signal-code constructions based on AMMC are characterized by a higher energy efficiency from 1 to 2.6 dB compared with signalcode constructions based on 8PSK and APSK.

In this paper a design of millimeter-wave six-port device for LTCC (Low Temperature Cofired Ceramic) technology is presented. Furthermore, problems with implementation of the project taking into account requirements of LTCC technology are discussed.

The results of shielding effectiveness (SE) measurements of textile materials containing metal by the free-space transmission technique (FSTT) in the 1-26.5 GHz frequency range are presented in the paper. It is shown that experimental data processing using time-domain gating (TDG) makes it possible to effectively remove diffracted and reflected components from the desired signal. The comparison with the results obtained by other techniques, namely modified FSTT with TDG and coaxial line probe technique (ASTM D4935-99) is given. The comparison shows that the proposed technique gives more reasonable results while the measurement set-up is simpler in realization.

Millimeter-wave (mm-wave) transmitters are often fabricated using advanced technology and require a sophisticated manufacturing facility. Access to such technologies is often very limited and difficult to gain particularly at the initial stage of research. Therefore, to increase the accessibility of mm-wave transmitters, this study proposes a design that can be assembled in a standard microwave laboratory from commercially available or externally ordered components. The transmitter demonstrated in this paper operates above 100 GHz and is based on a lowtemperature co-fired ceramic board in which the antenna array, microstrip lines, and power-supply lines are fabricated in a single process. Different technologies are used to assemble the module, e.g., wire-bonding, soldering, and wax adhesion. Advantages and disadvantages of the proposed design are given based on experimental evaluation of the prototype. Although the performance of the developed transmitter is not as good as that of the similar modules available in the recent literature, the results confirm the feasibility of a mm-wave transmitter that is assembled without employing advanced technologies and superior machinery.