Finite mixture and Markov-switching models generalize and, therefore, nest specifications featuring only one component. While specifying priors in the general (mixture) model and its special (single-component) case, it may be desirable to ensure that the prior assumptions introduced into both structures are compatible in the sense that the prior distribution in the nested model amounts to the conditional prior in the mixture model under relevant parametric restriction. The study provides the rudiments of setting compatible priors in Bayesian univariate finite mixture and Markov-switching models. Once some primary results are delivered, we derive specific conditions for compatibility in the case of three types of continuous priors commonly engaged in Bayesian modeling: the normal, inverse gamma, and gamma distributions. Further, we study the consequences of introducing additional constraints into the mixture model’s prior on the conditions. Finally, the methodology is illustrated through a discussion of setting compatible priors for Markov-switching AR(2) models.

Maximum score estimation is a class of semiparametric methods for the coefficients of regression models. Estimates are obtained by the maximization of the special function, called the score. In case of binary regression models it is the fraction of correctly classified observations. The aim of this article is to propose a modification to the score function. The modification allows to obtain smaller variances of estimators than the standard maximum score method without impacting other properties like consistency. The study consists of extensive Monte Carlo experiments.

We consider the Debreu private ownership economy in which all consumption plans belong to a proper linear subspace of the commodity-price space ℝ^l. This geometric property of consumption sets means that there is a dependency between quantities of some commodities in all consumption plans. Competitive mechanism makes producers adjust their plans of action to the same dependency. It results in the mild evolution of the production sector to offer production plans which are also contained in the given subspace of ℝ^l. Modified production system and the initial consumption system can form an economy in equilibrium. The aim of this paper is to model gentle changes of producers’ activity that give equilibrium in the Debreu economy with consumption system reduced to a proper subspace of ℝ^l without considering additional costs.

The paper presented the model of a problem of choosing the location of a car crane for the installation of prefabricated elements in a given assembly situation with the solution proposal. The issue relates to the situation, in which the dimensions of the shielding structure (assembled) are specified, sizes and weights of the prefabricated elements with their location on the structure. The solution seeks the best location of a crane from the point of view of the parameters of the crane, scope and height of the lift.

The introduction of the sustainable development elements in the construction industry leads to finding new ways of using waste minerals that are difficult in storage and recycling. Coal combustion products have been already introduced into building materials as a part of cement or concrete but they have been thought insufficiently compatible with the polymer-cement binders [7]. The paper presents results of the mechanical properties of polymer-cement composites containing two types of mineral additives: waste perlite powder that is generated during the perlite expanding process, and calcium fly ash which is the byproduct of burning coal in conventional furnaces. Mechanical tests of polymer-cement composites modified with wastes were carried out after 28 and 90 days of curing. As a part of preliminary study specific surface area and particle size distribution of mineral wastes were determined.

The study presents the results of theoretical investigations into lateral torsional buckling (LTB) of bi-symmetric I-beams, elastically restrained against warping at supports. Beam loading schemes commonly used in practice are taken into account. The whole range of stiffness of the support joints, from free warping to warping fully restrained, is considered. To determine the critical moment, the energy method is used. The function of the beam twist angle is described with power polynomials that have simple physical interpretation. Computer programs written in symbolic language for numerical analysis are developed. General approximation formulas are devised. Detailed calculations are performed for beams with end-plate joints. Critical moments determined with programs and approximation formulas are compared with the results obtained by other researchers and with those produced by FEM. Very good accuracy of results is obtained.

The need for modernization of curricula is growing with the development of new technologies to support teaching, changes in business strategy of universities in Poland and European Union, and development of the society. In response to these changes, at the Department of Civil and Environmental Engineering at Poznan University of Technology, new English-language specialty master studies – Construction Technology Management was launched in March 2014. Studies are based on the cooperation between the student, the industry and the university, allowing students to get to know the specifics of the construction industry. In addition, Poznan University of Technology is involved in an MBAIC project MBA in construction aimed at common study for postgraduates.The synergy achieved through the implementation of these two projects enables the possibility to educate construction managers capable of communication in English, possessing knowledge regarding innovation in the construction industry, who are well prepared to enter the labour market and have the possibility of subsequent improvement of managerial competences.

The article presents an analysis and evaluation of the accident rate in selected European Union countries. On the basis of available statistical data, the analysis of accidents in various sectors of the European Union economy was carried out. Afterwards, a ranking of countries regarding accidents in the construction industry was developed. For the selected representative countries, analysis of changes in the indicators which characterize the accident rate during the period between 2008 and 2012 was carried out. Conclusions resulting from the conducted research were formulated.

The paper presents an analysis of the influence of elevated temperature on thin-walled purlins restrained by sheeting. In the first part of the study the bearing capacity of purlins cooperating with sheeting is examined in normal and elevated temperature based on European Standards. Next, special attention is paid to creating a numerical FEM model of the restrained purlins in Abaqus program taking into account different materials properties with respect to temperature increase.

In Poland, it often happens that construction objects are subject to demolition work for different reasons. Demolition, according the Construction Law, is defined as a type of construction works and, as such, represents a particular type of construction project. As in other construction projects, a very important phase, in addition to execution of the works, is to prepare, design and plan demolition works. Some demolition activities are covered by appropriate regulations and can be described as typical. On the other hand the technical side of demolition works depends on many factors such as: the type of building, its age, technical condition, type of construction, etc. This article covers the analysis of the stages and tasks in the preparatory phase of the building demolition. This work will also present a description of the tasks carried out during the demolition works based on the example of a historic tenement house located in Krakow. This analysis aims to identify implementation problems and sources of risk that may occur during this type of construction work.

The paper presents a certain way which determines the critical buckling force for a micro-heterogeneous FGM plate band. A stiffness matrix of an individual cell of such band, different for various cells, has been determined. The obtained matrix can also be treated as a variable stiffness matrix of a “superelement” in the Finite Element Method. A computational algorithm for the critical force as well as the way of testing of its correctness has also been presented. The results obtained for various support conditions have been compared to the values known from the literature. The influence of the number of cells on the critical buckling force has been investigated.

Traffic related noise is currently considered as an environmental pollution. Paper presents results of multidirectional study attempting to serve urban traffic without the need to erect noise barriers interfering urban space. Initial concept of the road expansion included construction of 1000 m of noise barriers dividing city space. Improvement in the acoustic conditions after construction completion is possible due to the applied noise protection measures: vehicle speed limit, smooth of traffic flow, use of road pavement of reduced noise emission and the technical improvement of the tramway.

The analytical approach is used for checking the stability of laterally unrestrained bisymmetric beams. The stability equations for simply supported beams are solved approximately using the Bubnov–Galerkin method [4]. The lateral buckling moment depends on bending distribution and on the load height effect. Each of applied concentrated and distributed loads, may have arbitrary direction and optional coordinate for the applied force along the cross section’s height. Derived equations allow for simple, yet fast control of lateral buckling moment estimated by FEM [15].

The paper presents a proposal for the assessment of the reliability of steel truss (both statically determinate and indeterminate) in the persistent and accidental design situation. In the analysis, a probabilistic approach was used. The global Hasofer-Lind reliability index was employed, computed in successive time steps for the whole structure, not for individual elements. The statically determinate truss was modelled as a serial system from the reliability standpoint. For the statically indeterminate truss, kinematically admissible failure mechanisms were determined by means of the examination of the singularity of the stiffness matrix of the structure, converting the truss into a geometrically variable system. For the problem thus formulated, a serial-parallel reliability model was constructed. Monitoring the reliability index in the successive minutes of the fire makes it possible to estimate the probability of the structure failure, and to decide whether the required safety level is maintained.

The transitional siliceous rocks from the Belchatow lignite deposit belong to the deposits with heterogeneous petrographic composition. The research allows us to identify among others, opoka-rocks and gaizes. The mineralogical-chemical analysis proves that the main ingredients of the studied rocks commonly used as building material are minerals of the SiO₂ group. Laboratory tests show that the nature of siliceous mineral phases has several effects on the geomechanical parameters of the studied transitional rocks. They are a reduction in water content and rock porosity, which leads to the transition of opal type A to opal type crystobalit and trydymit and then to quartz or microquartz. Their density and strength parameters are increased.

A study was undertaken to investigate the effects of crumb rubber on the strength and mechanical behaviour of Rubberized cement soil (RCS). In the present investigation, 26 groups of soil samples were prepared at five different percentages of crumb rubber content, four different percentages of cement content and two different finenesses of crumb rubber particle. Compressive strength tests were carried out at the curing age of 7 days, 14 days, 28 days and 90 days. The test results indicated that the inclusion of crumb rubber within cement soil leads to a decrease in the compressive strength and stiffness and improves the cement soil’s brittle behaviour to a more ductile one. A reduction of up to 31% in the compressive strength happened in the 20% crumb content group. The compressive strength increases with the increase in the cement content. And the enlargement of cement content is more efficient at low cement content.

For the construction company, tendering is the most popular way of acquiring contracts. The decision to participate in the tender needs to be made carefully, as it affects the condition of the company and is an important aspect in its quest for success. The bid/no bid decision making is a complex process involving a number of factors. The research carried out so far has mainly concerned the identification of the various kinds of influences on contractors’ bidding decisions. The researchers, on the basis of contractors’ opinions, created rank lists in an attempt to categorize the factors. In this paper the author employs factor analysis which belongs to basic methods of multi-dimensional data analysis. The paper’s aim is first to depict an output set of observed variables, that is bid/no bid factors, in terms of a smaller set of latent variables which cannot be directly observed and then to interpret the dependencies between them.