The new legislative provisions, regulating the solid fuel trade in Poland, and the resolutions of

provincial assemblies assume, inter alia, a ban on the household use of lignite fuels and solid fuels

produced with its use; this also applies to coal sludge, coal flotation concentrates, and mixtures

produced with their use. These changes will force the producers of these materials to find new

ways and methods of their development, including their modification (mixing with other products

or waste) in order to increase their attractiveness for the commercial power industry. The presented

paper focuses on the analysis of coal sludge, classified as waste (codes 01 04 12 and 01 04 81)

or as a by-product in the production of coals of different types. A preliminary analysis aimed at

presenting changes in quality parameters and based on the mixtures of hard coal sludge (PG SILESIA)

with coal dusts from lignite (pulverized lignite) (LEAG) has been carried out. The analysis

of quality parameters of the discussed mixtures included the determination of the calorific value,

ash content, volatile matter content, moisture content, heavy metal content (Cd, Tl, Hg, Sb, As, Pb,

Cr, Co, Cu, Mn, Ni, and W), and sulfur content. The preliminary analysis has shown that mixing

coal sludge with coal dust from lignite and their granulation allows a product with the desired quality

and physical parameters to be obtained, which is attractive to the commercial power industry.

Compared to coal sludge, granulates made of coal sludge and coal dust from lignite with or without

ground dolomite have a higher sulfur content (in the range of 1–1.4%). However, this is still an

acceptable content for solid fuels in the commercial power industry. Compared to the basic coal

sludge sample, the observed increase in the content of individual toxic components in the mixture

samples is small and it therefore can be concluded that the addition of coal dust from lignite or carbonates

has no significant effect on the total content of the individual elements. The calorific value

is a key parameter determining the usefulness in the power industry. The size of this parameter for

coal sludge in an as received basis is in the range of 9.4–10.6 MJ/kg. In the case of the examined

mixtures of coal sludge with coal dust from lignite, the calorific value significantly increases to

the range of 14.0–14.5 MJ/kg (as received). The obtained values increase the usefulness in the

commercial power industry while, at the same time, the requirements for the combustion of solid

fuels are met to a greater extent. A slight decrease in the calorific value is observed in the case of

granulation with the addition of CaO or carbonates. Taking the analyzed parameters into account,

it can be concluded that the prepared mixtures can be used in the combustion in units with flue gas

desulfurization plants and a nominal thermal power not less than 1 MW. At this stage of work no

cost analysis was carried out.