New Year’s Eve is an example of a situation in which urban residents are exposed to an almost continuous and increased noise level from the impulsive sounds sources – fireworks. This custom has become a source of many controversies related to the protection of human and animal health or environmental pollution. However, current legal regulations only slightly affect the subject of noise of fireworks and its harmfulness. Currently, it does not seem possible to completely prohibit the use of fireworks in urban areas, but this does not mean that it is not possible to decrease the degree of their annoyance.

The paper consists the issues of identification, analysis and assessment of impulsive noise of fireworks and acoustic climate during New Year’s Eve. Material presented refers to measurements of time series, frequency spectrum and values of noise parameters of selected fireworks. It was presented, among others, that the measured values exceed the criteria for occupational noise (LCpeak), due to the direct hazard of hearing loss, from 1.8 dB at a distance of 25 m and 6.2 dB at a distance of 15 m. Also this work discusses results of impulsive noise measurements of fireworks recorded during New Year’s Eve in years 2016–2017. Material refers to measurements at three measurement points spread over the city of Kraków. Obtained results were compared with typical noise levels for night time in urban area, indicating also the main sources of annoyance and hazard from this type of noise.

An innovative system designed for the continuous monitoring of acoustic climate of urban areas was presented in the paper. The assessment of environmental threats is performed using online data, acquired through a grid of engineered monitoring stations collecting comprehensive information about the acoustic climate of urban areas. The grid of proposed devices provides valuable data for the purpose of long and short time acoustic climate analysis. Dynamic estimation of noise source parameters and real measurement results of emission data are utilized to create dynamic noise maps accessible to the general public. This operation is performed through the noise source prediction employing a propagation model being optimized for computer cluster implementation requirements. It enables the system to generate noise maps in a reasonable time and to publish regularly map updates in the Internet. Moreover, the functionality of the system was extended with new techniques for assessing noise-induced harmful effects on the human hearing system. The principle of operation of the dosimeter is based on a modified psychoacoustic model of hearing and on the results of research performed with participation of volunteers concerning the impact of noise on hearing. The primary function of the dosimeter is to estimate, in real time, auditory effects which are caused by exposure to noise. The results of measurements and simulations performed by the system prototype are depicted and analyzed. Several cases of long-term and short-term measurements of noise originating from various sources were considered in detail. The presented outcomes of predicted degree of the hearing threshold shift induced during the noise exposure can increase the awareness of harmfulness of excessive sound levels.

The paper presents results of the localization of main noise sources in the industrial plant. Identification of main noise sources was made with an acoustic camera using Beamforming Method. Parallel to the measurements by means of the acoustic camera, sound level measurements on the main noise sources have been performed. Based on the calculations, prediction regarding the noise emission at residential buildings located near to the plant has been determined. Acoustic noise maps have been performed with LEQ Professional software, which includes the 3D geometry of the buildings inside the plant. It has been established that, after introduction of noise reduction measures in the plant, the noise levels at the observation points in the residential area meets the limit values.

The paper presents experimental research carried out to determine the possible actions to reduce the noise generated by trams in a highly urbanised area. A few design strategies affecting tram ride quality have been presented – especially in the aspect of the acoustic phenomena. Main sources of the noise in trams were characterised. The paper includes selected results of comprehensive studies of tram noise in the pass-by test based on the authors’ research methodology. The tests were carried out on various types of trams to recognise the acoustic phenomena characteristic for the rolling stock in a selected tram system. The results of the measurements were analysed both in the field of amplitudes based on noise maps and in respect to frequencies based on noise spectra. The results indicated the rolling noise as important issue demanding taking some actions in order to reduce its level. In this area, elements for the application of individual attenuation solutions, i.e. at the source and during propagation, were presented. The results of the measurements were used as input data to the assumptions of the noise attenuation passive system, which was the final outcome of the study. Dedicated external dampers were used in the case of wheel and rail pairs, where the dominant power of the noise is emitted. The acoustic properties of the bogie area and the bogie side covers were redeveloped to hamper the noise propagation, which is a novel application. The presented results indicate measurable benefits from the applied solutions on the tram noise reduction.

Traffic related noise is currently considered as an environmental pollution. Paper presents results of multidirectional study attempting to serve urban traffic without the need to erect noise barriers interfering urban space. Initial concept of the road expansion included construction of 1000 m of noise barriers dividing city space. Improvement in the acoustic conditions after construction completion is possible due to the applied noise protection measures: vehicle speed limit, smooth of traffic flow, use of road pavement of reduced noise emission and the technical improvement of the tramway.

The noise perceiving issue is very subjective and depends on several factors, such as: the living environment in which each person has grown and developed, the education they have received, the culture in which their life principles have formed and, last but not least, the social and financial status. Therefore, in order to establish effective actions in multiple directions when it comes to any urban noise analysis, it is very important to know the perception and the subjective reactions of the individuals involved. The paper respects this idea, presenting the results of a sociological study on urban noise, applied in the city of Cluj-Napoca, Romania. The intention was to capture the reactions of the permanent residents of the city, but also of the people in transit, as well as to analyse the changes that occurred as result of the implementation of the Environmental Noise Directive (European Commission). The study shows that 75.2% of the respondents consider that the noise in the city has increased in the last ten years and 58% of them have rated the noise as level 4 or 5 on a five point scale. Information related to noise maps and actions taken to reduce community noise has no sufficient dissemination. There is also a medium to low reaction of the population in correlation to the declared noise annoyance.

The existing traffic noise prediction models in road intersections relate mainly to the typical solutions of intersection geometry and traffic organisation. There are no models for large and more complex intersections such as signalised roundabouts. This paper presents the results of studies on the development of a traffic noise prediction model for this type of intersection. The model was developed using a multiple regression method based on the results of field measurements of traffic parameters and noise levels in the vicinity of signalised roundabouts in Poland. The obtained model consists of two groups of variables affecting noise levels at the intersection. The first group determines in detail the influence of traffic and geometry of the closest entry. The second group shows the influence of more distant noise sources (traffic at the three remaining entries of the intersection) and the influence of the dimensions of the entire intersection. The developed model was verified through additional field measurements, as well as compared to the results of two methods of traffic noise prediction: the French ‘NMPB-Routes-2008’ and the German ‘RLS-90’. The obtained results confirmed a higher accuracy of calculations performed using the developed model in the range of: −1.2 dB ÷ +1.0 dB, while the ‘NMPB-Routes-2008’ and ‘RLS-90’ calculate precision were respectively: −2.8 dB ÷ +1.3 dB, and +0.8 dB ÷ +5.2 dB. Therefore, the developed model allows for a more accurate prediction of noise levels in the vicinity of signalised roundabouts in a flat terrain without buildings and noise barriers.

An important aspect in assessing noise in urban agglomerations is the subjective one, which takes into account the sensitivity and specific reactions of residents to the noise in their living environment. This paper presents results of a sociological study initiated to determine the population awareness, regarding the urban acoustic environment and estimation of effects and disturbance. The survey was conducted in a Romanian city, to complement the information provided by the strategic noise map of the area. This approach allows the estimation of specific local patterns of reaction and response to urban noise of the exposed population and provides the information, needed to develop action plans and to set proper solutions for urban area planning.

The aim of this project was to create a ranking of the nursery schools in Wrocław with regard to the quality of the acoustic environment on their premises, using a specially developed evaluation methodology. Each nursery school was rated according to an adopted grading scale on the basis of the noise level distribution on the playground and on the nursery school building facades. Using the grading scale one can classify nursery school premises into twelve categories characterized by different acoustic environment quality, from exceptionally good (< 45 dB) to exceptionally bad (> 70 dB).

The appropriately rescaled data from the acoustic map of Wrocław and the authors' own measurements and simulation analyses were used. The developed methodology was verified by comparing the ratings yielded by it with those determined on the basis of field measurements and simulation studies, carried out for several selected nursery schools. The paper presents the results of an acoustic environment quality assessment carried out, using the developed investigative methodology, for 118 nursery schools located in Wrocław.

Infrasounds are very common in the natural environment. There are various opinions about their harmfulness or lack of harmfulness. One of the reasons of increasing interest in this issue is that there are more and more wind farms appearing close to building estates which are undoubtedly a source of infrasound. It is reasonable to present the results of research of infrasound noise connected not only with wind farms. In this study own results of research of infrasound noise related to daily human activity are presented. The measurements were carried out during housework, travel to the office or shop, and during shopping. The results are shown in the form of values of equivalent levels and 1/3-octave analyses. Taking into consideration the natural sources of infrasound in the environment, the measurements were conducted during both windy and windless weather. On the basis of the results of the measurements it was possible to define the daily exposure to infrasound noise. Those results were also compared with the available in the literature threshold values sensed by people. Estimated level of exposure to noise beyond workplace together with the level of exposure to noise at work enables to define daily exposure level, which means a better assessment of risk of health loss. Increasing social awareness of acoustic threat in everyday life allows us to identify the problem and at the same time improve the quality of rest and efficiency at work.

The aim of the study was to investigate how the time structure of a road-traffic affects the noise annoyance judgment. In a psychoacoustic experiment, the listeners judged noise annoyance of four road-traffic noise scenarios with identical numbers of vehicles and LAeq, T value but different time structure of a road traffic. The traffic structure varied from even to highly clustered across different scenarios. The scenarios were created in the laboratory from a large set of a single vehicle pass-by recordings. The scenarios were additionally filtered with filters corresponding to a typical window transfer function to simulate the situation inside the building. The experimental results showed that there is a significant difference in annoyance judgment for different traffic structures with the same LAeq, T value. The highest annoyance ratings were obtained for even traffic distribution and the most clustered distribution resulted in the lowest annoyance rating. These results correlated well with the averaged loudness, whereas the percentile loudness (N5) and level (L5) predict the opposite results.

The grid method is the most widely used technique for measurement-based noise assessment, and indeed is part of the ISO 1996-2 standard. Nevertheless it has certain disadvantages. The present work is an analysis of the grid method for evaluating noise, firstly in the city of Cáceres and, secondly in two other smaller towns. Using as reference a 200 metre grid study, a study was made of the effect of varying the size and form of the grid on the city’s overall noise value, the percentage of data found to lie above some reference thresholds, and the noise value assigned to a certain zone of the city. The ISO 1996 recommendations of the necessity of new sampling points and the method’s predictive capacity for these new measurements were also analyzed.

In the paper a new method, called the Noise Scattering Pattern (NSP) method, for RTS noise identification in a noise signal is presented. Examples of patterns of the NSP method are included.