This paper presents numerical simulationsof the behavior of a sandy layer subjected to a cyclic horizontal acceleration in shaking table tests, with a particular attention focused on the settlements of a dry sand layer, and on the liquefaction of saturated sand. A compaction/liquefaction model (C/L) is applied to these simulations. The infl uence of specifi c parameters of the model on the compaction and liquefaction of a sandy layer is shown and discussed. The results of simulations are compared with selected experimental data.

Static liquefaction is a form of unstable behaviour of granular soil. It is most common in saturated loose sands under monotonically loaded undrained conditions. Predicting static liquefaction using an elastic-plastic model that incorporates the non-associated plastic flow rule and strain hardening is possible. The article briefly describes the unstable behaviour of saturated sand in undrained conditions under a monotonic load. A simple elastic-plastic model with deviatoric hardening and a Drucker–Prager load surface is presented. The constitutive relationships were programmed in a Python script. Simulations of triaxial tests under mixed stress-strain control demonstrated the model’s ability to predict various undrained sand responses, including fully stable responses (no liquefaction) and partial and complete liquefaction under triaxial compression and tension. Predicting static liquefaction is possible by properly selecting the proportions of the parameters involved in plastic potential and loading functions and the parameter A used in the deviatoric hardening rule of hyperbolic type.

The paper presents an estimation of liquefaction susceptibility of some soils from the coast of the Marmara Sea, which was heavily

striken by the Kocaeli earthquake in 1999. Firstly, the results of field investigations are summarized. Then, the results of laboratory investigations of physical and mechanical properties of the soils collated from the sites investigated are presented. The mechanical properties relate to the compaction/liquefaction model of saturated soils. This model is briefly outlined, then respective experimental procedures dealing with its calibration described, and values of material parameters listed. Liquefaction potential of investigated soils is analysed using standard procedures, based on the grain size distribution curves and SPTs. Finally, the simulation of pore-pressure generation and onset of liquefaction of Turkish soils is carried out, using the compaction/liquefaction model. Discussion of some standard empirical procedures of estimation of liquefaction potential of saturated soils, conducted from the analytical point of view, is also presented.