Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 2
items per page: 25 50 75
Sort by:
Download PDF Download RIS Download Bibtex

Abstract

This article focuses on the study of the influence of remelting and subsequent natural and artificial ageing on the structure of recycled AlSi9Cu3 alloy with increased iron content. The assessed changes in eutectic silicon and iron-based intermetallic phases were carried out using optical and scanning electron microscopy. The degradation of the eutectic silicon morphology due to remelting occurred only at the highest numbers of remelting. The effect of remelting the investigated alloy, which is accompanied by a gradual increase in wt. % Fe, began to manifest significantly through a change in the length of the ferric phases after the fourth remelting. As expected, the artificial ageing process has proven to be more effective than natural ageing. It has led to a change in the eutectic silicon morphology and has been beneficial in reducing the lengths of adverse ferric phases. The use of alloys with higher numbers of remelting, or with greater “contamination”, for the manufacture of shape-challenging castings is possible when using a suitable method of eliminating the negative factors of the remelting process. The results of our investigation show a suitable method of the above elimination the application of heat treatment T5 – via artificial ageing.

Go to article

Authors and Affiliations

M. Matejka
D. Bolibruchová
Download PDF Download RIS Download Bibtex

Abstract

Recycling of aluminium returnable material through its reuse is now an essential component of the production of aluminium alloy castings. The main goal is to find a suitable ratio of the primary alloy and the returnable material in the batch, thus determining the right compromise between the price and the quality of the casting. Experimental alloys were evaluated by thermal analysis, combination of structural analytical techniques and selected mechanical properties. The alloys were also subjected to tearing susceptibility testing. The increase in the returnable material amount resulted in changes in the alloy properties at the first increase in volume to 20%. After exceeding the balanced ratio (50:50), there was considerable degradation of the microstructure, failure to achieve the minimum values of some mechanical properties required by the standard, and the alloy showed increased susceptibility to tearing.

Go to article

Authors and Affiliations

M. Matejka
ORCID: ORCID
D. Bolibruchová
ORCID: ORCID
M. Chalupová
ORCID: ORCID

This page uses 'cookies'. Learn more