Search results

Filters

  • Journals
  • Date

Search results

Number of results: 8
items per page: 25 50 75
Sort by:
Download PDF Download RIS Download Bibtex

Abstract

Due to the presence of harmful substances in resins those mould sands may be hazardous to the natural environment and workers. The general assessment of harmfulness of sands used for molds and cores encompasses 2 basic points: emission of hazardous substances during processes of preparing sands, pouring mold with liquid metals (high temperatures), cooling and shaking-out; possibility of washing out hazardous substances from used sands to the environment, during storage or economic use outside foundries. We present the results of research on the emission of BTEX compounds from mould sands with phenolic resins during pouring liquid metal of different temperature (cast iron and Al alloy). The research was conducted according to the original method prepared by the authors, which has been used for years in cooperation with various foundries (Poland, abroad).
Go to article

Authors and Affiliations

St.M. Dobosz
J. Jakubski
K. Major-Gabryś
Download PDF Download RIS Download Bibtex

Abstract

Due to the presence of harmful substances in resins those mould sands may be hazardous to the natural environment and workers. The general assessment of harmfulness of sands used for molds and cores encompasses 2 basic points: emission of hazardous substances during processes of preparing sands, pouring mold with liquid metals (high temperatures), cooling and shaking-out; possibility of washing out hazardous substances from used sands to the environment, during storage or economic use outside foundries. We present the results of research on the emission of BTEX compounds from mould sands with phenolic resins during pouring liquid metal of different temperature (cast iron and Al alloy). The research was conducted according to the original method prepared by the authors, which has been used for years in cooperation with various foundries (Poland, abroad).
Go to article

Authors and Affiliations

M. Holtzer
R. Dańko
S. Żymankowska-Kumon
A. Bobrowski
J. Kolczyk
Download PDF Download RIS Download Bibtex

Abstract

Suitability of the given binding agent for the moulding sands preparation depends on the one hand on the estimation of technological properties of the sand and the mould made of it and the obtained casting quality and on the other hand on the assessment of this sand influence on the natural and working environment. Out of moulding sands used in the foundry industry, sands with organic binders deserve a special attention. These binders are based on synthetic resins, which ensure obtaining the proper technological properties and sound castings, however, they negatively influence the environment. If in the initial state these resins are not very dangerous for people and for the environment, thus under an influence of high temperatures they generate very harmful products, being the result of their thermal decomposition. Depending on the kind of the applied resin (phenol-formaldehyde, urea, furfuryl, urea–furfuryl, alkyd) under an influence of a temperature such compounds as: furfuryl alcohol, formaldehyde, phenol, BTEX group (benzene, toluene, ethylbenzene, xylene), and also polycyclic aromatic hydrocarbons (PAH) can be formed and released. The aim of the study was the development of the method, selection of analytical methods and the determination of optimal conditions of formation compounds from the BTEX group. An emission of these components constitutes one of the basic criteria of the harmfulness assessment of binders applied for moulding and core sands. Investigations were carried out in the specially designed set up for the thermal decomposition of organic substances in a temperature range: 5000 C – 13000 C at the laboratory scale. The object for testing was alkyd resin applied as a binding material for moulding sands. Within investigations the minimal amount of adsorbent necessary for the adsorption of compounds released during the decomposition of the resin sample of a mass app. 15 mg was selected. Also the minimal amount of solvent needed for the desorption of compounds adsorbed in the column with adsorbent was found. The temperature range, in which the maximal amounts of benzene, toluene, ethylobenzene and xylenes are released from the resin, was defined. The qualitative and quantitative analyses of compounds from the BTEX group were performed by means of the gas chromatography combined with the mass spectrometry (GC/MS).

Go to article

Authors and Affiliations

M. Kubecki
M. Holtzer
R. Dańko
S. Żymankowska-Kumon
B. Grabowska
A. Bobrowski
Download PDF Download RIS Download Bibtex

Abstract

Emission of gases under high temperature after pouring molten metal into moulds, which contain the organic binder or other additives

(solvents or curing agent), may be an important factor influencing both on the quality of the produced castings, and on the state of

environment. Therefore, a comprehensive study of the emitted gases would allow to determine restrictions on the use of the moulding

sands in foundry technologies, eg. the probability of occurrence of casting defects, and identify the gaseous pollutants emitted to the

environment. The aim of the research presented in this paper was to determine the amount of gases that are released at high temperatures

from moulding sands bonded by biopolymer binder and the quantitative assessment of the emitted pollutants with particular emphasis on

chemical compounds: benzene, toluene, ethylbenzene and xylenes (BTEX). The water-soluble modified potato starch as a sodium

carboxymethyl starch with low (CMS-NaL) or high (CMS-NaH) degree of substitution was a binder in the tested moulding sands.

A tests of gases emission level were conducted per the procedure developed at the Faculty of Foundry Engineering (AGH University of

Science and Technology) involving gas chromatography method (GC). The obtained results of the determination of amount of BTEX

compounds generated during the decomposition process of starch binders showed lower emission of aromatic hydrocarbons in comparison

with binder based on resin Kaltharz U404 with the acidic curing agent commonly used in the foundries.

Go to article

Authors and Affiliations

S. Żymankowska-Kumon
B. Grabowska
A. Bobrowski
K. Kaczmarska
Download PDF Download RIS Download Bibtex

Abstract

Organic binders applied in foundry plants based on synthetic resins, from the one side influence obtaining the required technological properties by the moulding sand and – in consequence – obtaining good quality castings, and on the other side are the source of volatile organic compounds (VOC). Together with synthetic resins their hardeners, which although added in very small amounts emit during their thermal decomposition substances negatively influencing the natural environment, are also used. Both, resins and hardeners only at the influence of high temperatures accompanying moulds pouring with liquid metal generate harmful volatile organic compounds including compounds from the BTEX group. Investigations of the temperature influence on the kind and amount of organic compounds formed during the thermal decomposition of selected binders and hardeners and their mixtures allow to determine temperature ranges the most favourable for emitting harmful substances as well as to compare their emission from the selected materials. The aim of this study was the determination the temperature influence on formation substances from the BTEX group, during thermal decomposition of the selected binder, its hardener and their mixture. The BTEX group emission constitutes one of the basic criteria in assessing the harmfulness of materials applied for moulding and core sands and it can undergo changes in dependence of the applied system resin-hardener. Investigations were carried out on the specially developed system for the thermal decomposition of organic substances in the temperature range: 5000 C – 13000 C, at the laboratory scale. The investigations subject was the furan resin, its hardener and hardened furan resin. The assessment of the emission degree of the BTEX group in dependence of the system subjected to the temperature influence was performed, within the studies. The temperature range, in which maximal amounts of benzene, toluene, ethylbenzene and xylenes were emitted from tested materials – was defined. The qualitative and quantitative analysis of the BTEX group were carried out with using the gas chromatography technique coupled with the mass spectrometry (GC/MS).
Go to article

Authors and Affiliations

M. Kubecki
M. Holtzer
S. Żymankowska-Kumon
Download PDF Download RIS Download Bibtex

Abstract

No-bake process refers to the use of chemical binders to bond the moulding sand. Sand is moved to the mould fill station in preparation for

filling of the mould. A mixer is used to blend the sand with the chemical binder and activator. As the sand exits the mixer, the binder

begins the chemical process of hardening. This paper presents the results of decomposition of the moulding sands with modified ureafurfuryl

resin (with the low content of furfuryl alcohol below 25 % and different activators: organic and inorganic) on a quartz matrix,

under semi-industrial conditions. Investigations of the gases emission in the test foundry plant were executed according to the method

extended in the Faculty of Foundry Engineering (AGH University of Science and Technology). Article presents the results of the emitted

chosen aromatic hydrocarbons and loss on ignition compared with the different activators used to harden this resin. On the bases of the

data, it is possible to determine the content of the emitted dangerous substances from the moulding sand according to the content of loss on

ignition.

Go to article

Authors and Affiliations

S. Żymankowska-Kumon
B. Grabowska
A. Bobrowski
Download PDF Download RIS Download Bibtex

Abstract

The furan resin offers advantages such as high intensity, low viscosity, good humidity resistance and is suitable for cast different casting

alloys: steel, cast iron and non-ferrous metal casting. For hardening furan resins are used different hardeners (acid catalysts). The acid

catalysts have significant effects on the properties of the cured binder (e,g. binding strength and thermal stability) [1 - 3]. Investigations of

the gases emission in the test foundry plant were performed according to the original method developed in the Faculty of Foundry

Engineering, AGH UST. The analysis is carried out by the gas chromatography method with the application of the flame-ionising detector

(FID) (TRACE GC Ultra THERMO SCIENTIFIC).

Go to article

Authors and Affiliations

M. Holtzer
R. Dańko
S. Żymankowska-Kumon
A. Bobrowski
A. Kmita
Download PDF Download RIS Download Bibtex

Abstract

The results of investigations of three commercial binders applied in the Alphaset technology marked as: Sample E , Sample T and Sample S are presented in the hereby paper. These samples were subjected to the pyrolysis process at a temperature of 900°C (inert atmosphere, He 99.9999). The gas chromatograph coupled with the mass spectrometer and pyrolizer (Py-GC/MS) were used in the study. The identification of gases emitted during the thermal decomposition was performed on the basis of the mass spectral library. The obtained results indicate a certain diversification of emitted gases. Among the pyrolysis products the following harmful substances were identified: furfuryl alcohol, formaldehyde, phenol and also substances from the BTEX (benzene, toluene and ethylobezneze and xylenes) PAHs (Polycyclic Aromatic Hydrocarbons) and VOC groups (Volatile Organic Compounds). Therefore, from the environment protection point of view performing systematic investigations concerning the harmfulness of binders applied in the moulding and core sands technology, is essential.

Go to article

Authors and Affiliations

A. Roczniak
M. Holtzer
A. Kmita

This page uses 'cookies'. Learn more