In this work, we propose a new method for manufacturing busbars in photovoltaic modules for different solar cell generations, focusing on 1st and 3rd generations. The method is based on high-pressure spray coating using nanometric metallic powder. Our focus is primarily on optimizing conductive paths for applications involving conductive layers used in 3rd generation solar cells, such as quantum dot solar cell, dye-sensitized solar cell, and silicon-based solar cells on glass-glass architecture for buildingintegrated photovoltaic. The advantages of the proposed method include the possibility of reducing the material quantity in the conductive paths and creating various shapes on the surface, including bent substrates.
This paper examines the influence of the proposed high-pressure spraying technique using metallic particles on the morphology of the resulting conductive paths, interface characteristics, and electrical parameters. Conductive paths were created on four different layers commonly used in photovoltaic systems, including transparent conductive oxide, Cu, Ti, and atomic layer deposition processed Al ₂O ₃. The use of high-pressure technology enables the production of conductive layers with strong adhesion to the substrate and precise control of the spatial parameters of conductive paths. Furthermore, the temperature recorded during the deposition process does not exceed 385 K, making this technique suitable for various types of substrates, including glass and silicon. Additionally, the produced layers exhibit low resistance, measuring less than 0.3Ω . Finally, the mechanical resistance, as determined through tearing tests, as well as environmental and time stability, have been confirmed for the produced paths.

Dye-sensitized solar cells (DSSCs) were prepared using various food dyes. Food dyes are economically superior to organometallic dyes since they are nontoxic and inexpensive. The spectrophotometric evaluation of chosen food dyes in solution and on a TiO₂ substrate show that the dyes form J-aggregation on the photoelectrode substrate. Oxidation of potential measurements for used food dyes ensured an energetically permissible and thermodynamically favorable charge transfer throughout the continuous cycle of a photo-electric conversion. The performance of dye-sensitized solar cells based on food dyes was studied. The results illustrate that the dye containing carboxylic acid and sulfonic acid as the acceptor group gave the maximum conversion efficiency 4.20%.

Four dye-sensitized solar cell devices are designed and fabricated based on natural dyes extracted from Celosia Cristata, Saffron, Cynoglossum, and eggplant peel, as photosensitizers. The UV–vis technique has been served to determine maximum absorption of natural extract and pre-dyed photoanode. The Fourier transform infrared (FT-IR) was employed to cover the presence of functional groups. The cyclic voltammetry method has been employed to assess the possibility of charge transfer from dried natural dyes to the photoelectrode. The performance of natural-based dye-sensitized solar cells is determined subsequently. The highest power conversion efficiency was ca. 1.38%, which belonged to Celosia Cristata extract. The devices were examined for higher efficiencies, individually, co-sensitized arrangement and/or in tandem with each other.

The increasing concern for worldwide energy production is the result of global industrialization and decreasing energy resources. Despite the cost factor, solar energy continues to become more popular due to its long-term nature as a resource and growing conversion efficiency. A dye-sensitized solar cell converts visible light into electricity. The efficient use of dye as a sensitizer is the critical factor in enhancing the performance of the dye-sensitized solar cell. Natural dyes are found in abundance in leaves, flower petals, roots, and other natural resources. Due to the advantages of natural dyes such as cost-effectiveness, the simpler extraction process, and being environmentally friendly, etc., researchers are working extensively to replace synthetic dyes with natural ones. This paper highlights the various types of natural dyes and their effect on the efficiency of the dye-sensitized solar cell.

Electricity storage is one of the best-known methods of balancing the energy supply and demand at a given moment. The article presents an innovative solution for the construction of an electric energy storage device obtained from an innovative photovoltaic panel made of new dye-based photovoltaic modules and newly developed supercapacitors – which can be used as an emergency power source. In the paper, for the first time, we focused on the successful paring of new dye-sensitized solar cell (DSSC) with novel supercapacitors. In the first step, a microprocessor stand was constructed using Artificial Intelligence algorithms to control the parameters of the environment, as well as the solar charger composed of six DSSC cells with the dimensions of 100_100 mm and 126 CR2032 coin cells with a total capacitance of 60 F containing redox-active aqueous electrolyte. It was proven that the solar charger store enough energy to power, i.e. SOS transmitter or igniters, using a 5 V signal.

This work summarises investigations focused on the photoanode impact on the photovoltaic response of dye-sensitized solar cells. This is a comparison of the results obtained by the authors’ research team with literature data. The studies concern the effect of the chemical structure of the applied dye, TiO2 nanostructure, co-adsorbents addition, and experimental conditions of the anode preparation. The oxide substrates were examined using a scanning electron microscope to determine the thickness and structure of the material. The TiO2 substrates with anchored dye molecules were also tested for absorption properties in the UV-Vis light range, largely translating into current density values. Photovoltaic parameters of the fabricated devices with sandwich structure were obtained from current-voltage measurements. During tests conducted with the N719 dye, it was found that devices containing an 8.4 µm thick oxide semiconductor layer had the highest efficiency (5.99%). At the same time, studies were carried out to determine the effect of the solvent and it was found that the best results were obtained using an ACN : tert-butanol mixture (5.46%). Next, phenothiazine derivatives (PTZ-1–PTZ-6) were used to prepare the devices; among the prepared solar cells, the devices containing PTZ-2 and PTZ-3 had the highest performance (6.21 and 6.22%, respectively). Two compounds designated as Th-1 and M-1 were used to prepare devices containing a dye mixture with N719.

A novel methodology was implemented in the present study to concurrently control power conversion efficiency (η) and durability (D) of co-sensitized dye solar cells. Applying response surface methodology (RSM) and Desirability Function (DF), the main influential assembling (dye volume ratio and anti-aggregation agent concentration) and operational (performance temperature) parameters were systematically changed to probe their main and interactive effects on the η and D responses. Individual optimization based on RSM elucidated that D can be solely controlled by changing the ratio of vat-based organic photosensitizers, whereas η takes both effects of dye volume ratio and anti-aggregation concentration into account. Among the studied factors, the performance temperature played the most vital role in η and D regulation. In particular, however, multi-objective optimization by DF explored the degree to which one should be careful about manipulation of assembling and operational parameters in the way maximization of performance of a co-sensitized dye solar cell.

Clean and cheap device, namely dye-sensitized solar cells (DSSCs) were fabricated using a natural dye extracted from Sambucus ebulus. We prepared five sample solutions with various pH in the extraction process to improve power conversion efficiency. The UV–visible absorption investigation of sample solutions and on photoanode show the dyes from J-type aggregation on a photoanode substrate. Redox properties of all sample solutions certify thermodynamically a charge transfer from excited state to conduction band TiO₂. The optical properties of various dye solutions were investigated and results showed darkness and bluish tint effect of dye solutions extracted in basic environment rather than those extracted in acidic condition. Moreover, in comparison to the basic condition, the dye solutions extracted in acidic environment were more saturated and colorimetrically less different from that one which extracted in neutral condition. Photophysical and photoelectrochemical performance of natural extraction dyes have been studied in dye-sensitized solar cell devices. The results show the rather high conversion efficiency of 0.57%, 1.15%, 1.02%, 0.35% and 0.15% of each individual dye extraction, respectively.

Different anchoring groups such as thiophene-2-acetic and malonic acid were investigated for synthesis of new photosensitizers. The new dyes (photosensitizers) were made pure and determined by various analytical techniques. The chemical structure of synthesized materials was certified by analytical studies. UV-Visible and fluorescence spectra revealed intense fluorescence and absorption for organic photosensitizers. The cyclic voltammetry results showed that the two photosensitizers were suitable for dye sensitized solar cell preparation. The work electrode was gathered using tin (IV) oxide nanoparticles in dye-sensitized solar cells structure. The new photosensitizers and tin (IV) oxide were used for photovoltaic devices preparation. The power conversion efficiency was obtained as about 4.12 and 4.29% for Dye 1 and Dye 2, respectively.

Dye sensitized solar cells (DSSCs) based on indigo dyes exhibit suitable conversion efficiency. These organic dyes have been undergone for aggregation. Electron transfer process is reduced due to an aggregation of molecular dyes. Therefore, anti-aggregation agent is commonly utilized in fabrication of DSSCs. In the present study, two anti-aggregation agents namely as 3α,7α-dihydroxy-5β-cholanic acid (cheno) and 3α,7α,12α-trihydroxy-5β-cholanic acid (cholic acid) were added to indigo dye solution in DSSCs in order to determine the photovoltaic parameters such as short circuit photocurrent, open circuit voltage and conversion efficiency of each individual dye in the absence and presence of anti-aggregation agents. The results show that the conversion efficiencies are improved with reduced aggregation. Spectrophotometric evaluations of the indigo dyes in solution and on a TiO₂ substrate were carried out in the absence and presence of anti-aggregation agents in order to estimate changes in the status of the dyes in different environments. J-type aggregates on the nano TiO₂ are reduced in the presence of anti-aggregation agents.