A comparative analysis of a compact planar Square patch Microstrip Multiband antenna on three different substrates is proposed. The proposed design has a C-shaped slot etched on the square radiating part and the antenna is energized using microstrip feed line. RT Duroid (ε _r= 2.2), Taconic (ε _r= 3.2) and FR4 (ε _r= 4.4) substrates are used for simulation analysis. The flow of current is modified by the C-shaped slot making the antenna to resonate at 3/4 and 6 bands for RT Duroid/Taconic and FR4 substrates respectively suitable for 5G sub GHz applications. The antenna has a compact dimension of 32 × 32 × 1.6 mm ³ and exhibits a return loss, S11 of less than -10dB for all the resonating frequencies for all three substrates. The analysis has been done by considering the S11 (Return loss <-10 dB), Directivity, Antenna Gain, VSWR and surface current distribution. Table II provides the comparison of parameters for different substrate material.

A quasi-Yagi microstrip patch antenna with four directors and truncated ground plane has been designed and fabricated to have an ultra-wide bandwidth, high gain, low return loss and better directivity with center frequency at 3.40 GHz. After optimization, the proposed antenna yields an ultra-wide bandwidth of 1.20 GHz with lower and upper cutoff frequencies at 3.12 GHz and 4.32 GHz, respectively. High gain of 5.25 dB, return loss of -28 dB and directivity of 6.28 dB are obtained at resonance frequency of 3.40 GHz. The measured results of fabricated antenna have shown excellent agreement with the simulation results providing bandwidth of 1.34 GHz with lower and upper cutoff frequencies at 3.04 GHz and 4.38 GHz, respectively. The antenna gain of 5.33 dB, return loss of -44 dB are obtained at resonance frequency of 3.36 GHz. The dimension of the antenna is only of 65 mm x 45 mm ensuring compact in size.