The article discusses the weldment to casting conversion process of rocker arm designed for operation in a special purpose vehicle to
obtain a consistency of objective functions, which assume the reduced weight of component, the reduced maximum effort of material
under the impact of service loads achieved through topology modification for optimum strength distribution in the sensitive areas, and the
development of rocker arm manufacturing technology. As a result of conducted studies, the unit weight of the item was reduced by 25%,
and the stress limit values were reduced to a level guaranteeing safe application.
It has been found that the area where one can look for significant reserves in the procurement logistics is a rational management
of the stock of raw materials. Currently, the main purpose of projects which increase the efficiency of inventory management is to
rationalise all the activities in this area, taking into account and minimising at the same time the total inventory costs. The paper presents
a method for optimising the inventory level of raw materials under a foundry plant conditions using two different control models. The first
model is based on the estimate of an optimal level of the minimum emergency stock of raw materials, giving information about the need
for an order to be placed immediately and about the optimal size of consignments ordered after the minimum emergency level has
occurred. The second model is based on the estimate of a maximum inventory level of raw materials and an optimal order cycle.
Optimisation of the presented models has been based on the previously done selection and use of rational methods for forecasting the time
series of the delivery of a chosen auxiliary material (ceramic filters) to a casting plant, including forecasting a mean size of the delivered
batch of products and its standard deviation
The paper presents data concerning the total production of castings over the 2000-2014 period, both on a global scale, and in Poland. The
basic types of casting alloys were taken into account. Changes in the production volume and structure over the period of the analysed 15
years were pointed out with respect to countries leading in foundry production. The topmost position in the world foundry industry is held
by China for several years (with almost 45% share in the foundry market), the second place is taken by India (with almost 9% share). A
distinct reduction in the shares of the once significant producers of castings, such as USA, Japan, Germany, Russia, Italy, or France, was
observed over the 2000-2014 period. Poland had a share of 1.16% in 2000, and of 1.02% in 2014. Comparing the detailed data concerning
the years 2000 and 2014, one can see that the fractions of castings made of ductile iron, cast steel, aluminium alloys, or magnesium alloys
increase on a global scale, while such alloys as grey cast iron or malleable are in decline.
A comparative analysis involving the evaluation of the effectiveness of investment projects can be based on various rules indicating
selection of the most favorable decisions. The dynamic methods for assessment of investment projects discussed in this article, which
consider the possibility of modifying the predetermined investment options, are quite complex and difficult to implement. They are used
both in the construction phase of the new company, as well as in its subsequent modernization. The assessments should be characterized
by a high coefficient of the economic efficiency. The, observed in practice, high dynamic variability of both the external and internal
conditions under which the company operates is the reason why in the process of calculating the economic efficiency of investment
projects, there is a significant number of random parameters affected by high uncertainty and risk. Investments in the metallurgical
industry are characterized by a relatively long cycle of implementation and operation. These are capital-intensive projects and often
mistakenly taken investment decisions end in failure of the investment project and, consequently, in the collapse of the company. In
addition, the applied methods of risk assessment of investment projects, especially the dynamic ones, should be fully understood by
managerial staff and constitute an easy to use, yet accurate tool for improving the efficiency of the company.
The paper undertakes an important topic of evaluation of effectiveness of SCADA (Supervisory Control and Data Acquisition) systems,
used for monitoring and control of selected processing parameters of classic green sands used in foundry. Main focus was put on process
studies of properties of so-called 1st generation molding sands in the respect of their preparation process. Possible methods of control of
this processing are presented, with consideration of application of fresh raw materials, return sand (regenerate) and water. The studies
conducted in one of European foundries were aimed at pointing out how much application of new, automated plant of sand processing
incorporating the SCADA systems allows stabilizing results of measurement of selected sand parameters after its mixing. The studies
concerned two comparative periods of time, before an implementation of the automated devices for green sands processing (ASMS -
Automatic Sand Measurement System and MCM – Main Control Module) and after the implementation. Results of measurement of
selected sand properties after implementation of the ASMS were also evaluated and compared with testing studies conducted periodically
in laboratory.
Conducting reliable and credible evaluation and statistical interpretation of empirical results related to the operation of production systems
in foundries is for most managers complicated and labour-intensive. Additionally, in many cases, statistical evaluation is either ignored
and considered a necessary evil, or is completely useless because of improper selection of methods and subsequent misinterpretation of the
results. In this article, after discussing the key elements necessary for the proper selection of statistical methods, a wide spectrum of these
methods has been presented, including regression analysis, uni- and multivariate correlation, one-way analysis of variance for factorial
designs, and selected forecasting methods. Each statistical method has been illustrated with numerous examples related to the foundry
practice.
The objective of studies presented in this publication was structuring of research knowledge about the ADI functional properties and
changes in these properties due to material treatment. The results obtained were an outcome of research on the selection of a format of
knowledge representation that would be useful in further work aiming at the design, application and implementation of an effective system
supporting the decisions of a technologist concerning the choice of a suitable material (ADI in this case) and appropriate treatment process
(if necessary). ALSV(FD) logic allows easy modelling of knowledge, which should let addressees of the target system carry out
knowledge modelling by themselves. The expressiveness of ALSV (FD) logic allows recording the values of attributes from the scope of
the modelled domain regarding ADI, which is undoubtedly an advantage in the context of further use of the logic. Yet, although the logic
by itself does not allow creating the rules of knowledge, it may form a basis for the XTT format that is rule-based notation. The difficulty
in the use of XTT format for knowledge modelling is acceptable, but formalism is not suitable for the discovery of rules, and therefore the
knowledge of technologist is required to determine the impact of process parameters on values that are functional properties of ADI. The
characteristics of ALSV(FD) logic and XTT formalism, described in this article, cover the most important aspects of a broadly discussed,
full evaluation of the applicability of these solutions in the construction of a system supporting the decisions of a technologist.