A three Dimensional finite element model (FEM) incorporating the anisotropic properties and temperature profile of hot mix asphalt (HMA) pavement was developed to predict the structural responses of HMA pavement subject to heavy loads typically encountered in the field. In this study, ABAQUS was adopted to model the stress and strain relationships within the pavement structure. The results of the model were verified using data collected from the Korean Highway Corporation Test Road (KHCTR). The results demonstrated that both the base course and surface course layers follow the anisotropic behavior and the incorporation of the temperature profile throughout the pavement has a substantial effect on the pavement response predictions that impact pavement design. The results also showed that the anisotropy level of HMA and base material can be reduced to as low as 80% and 15% as a result of repeated loading, respectively.

The problem of recycled materials application in road construction is one of the key issues in contemporary road engineering. This article describes attempts to produce a hot mix asphalt (HMA) mixture entirely from processed reclaimed asphalt pavement (RAP) material. Due to the binder ageing process, rejuvenating agent was a necessary additive to the mixture. The mixture was tested to determine its parameters, including the content of voids, fatigue life, rutting resistance, stiffness and water sensitivity. The test results demonstrated that the rejuvenated RAP mixture is not inferior to fresh produced mixtures in terms of physical and strength parameters. Such results are, however, conditional on appropriate handling of the RAP material.