The constantly developing and the broadly understood automation of production processes in foundry industry, creates both new working conditions - better working standards, faster and more accurate production - and new demands for previously used materials as well as opportunities to generate new foundry defects. Those high requirements create the need to develop further the existing elements of the casting production process. This work focuses on mechanical and thermal deformation of moulding sands prepared in hot-box technology. Moulding sands hardened in different time periods were tested immediately after hardening and after cooling. The obtained results showed that hardening time period in the range 30-120 sec does not influence the mechanical deformation of tested moulding sands significantly. Hot distortion tests proved that moulding sands prepared in hot-box technology can be characterized with stable thermal deformation up to the temperature of circa 320oC.

Modern techniques of castings production, including moulding sands production, require a strict technological regime and high quality

materials. In the case of self-hardening moulding sands with synthetic binders those requirements apply mainly to sand, which adds to

more than 98% of the whole moulding sand mixture. The factors that affect the quality of the moulding sands are both chemical (SiO2

,

Fe2O3 and carbonates content) and physical. Among these factors somewhat less attention is paid to the granulometric composition of the

sands. As a part of this study, the effect of sand quality on bending strength Rgu

and thermal deformation of self-hardening moulding sands

with furfural and alkyd resin was assessed. Moulding sands with furfural resin are known [1] to be the most susceptible to the sand quality.

A negative effect on its properties has, among others, high content of clay binder and so-called subgrains (fraction smaller than 0,1mm),

which can lead to neutralization of acidic hardeners (in the case of moulding sands with furfuryl resin) and also increase the specific

surface, what forces greater amount of binding agents. The research used 5 different quartz sands originating from different sources and

characterized with different grain composition and different clay binder content.