In order to increase wear resistance cast steel casting the TiC-Fe-Cr type composite zones were fabricated. These zones were obtained by

means of in situ synthesis of substrates of the reaction TiC with a moderator of a chemical composition of white cast iron with nickel of

the Ni-Hard type 4. The synthesis was carried out directly in the mould cavity. The moderator was applied to control the reactive

infiltration occurring during the TiC synthesis. The microstructure of composite zones was investigated by electron scanning microscopy,

using the backscattered electron mode. The structure of composite zones was verified by the X-ray diffraction method. The hardness of

composite zones, cast steel base alloy and the reference samples such as white chromium cast iron with 14 % Cr and 20 % Cr, manganese

cast steel 18 % Mn was measured by Vickers test. The wear resistance of the composite zone and the reference samples examined by ballon-disc

wear test. Dimensionally stable composite zones were obtained containing submicron sizes TiC particles uniformly distributed in

the matrix. The macro and microstructure of the composite zone ensured three times hardness increase in comparison to the cast steel base

alloy and one and a half times increase in comparison to the white chromium cast iron 20 % Cr. Finally ball-on-disc wear rate of the

composite zone was five times lower than chromium white cast iron containing 20 % Cr.