One of the elements of the Polish Energy Policy program is the development of renewable energy, including energy from biomass combustion. In Poland, the Green Block was built at the Połaniec Power Station fired with 100% biomass fuel. This solution is conducive not only to obtaining energy but also to improving environmental protection. During the combustion of biomass in a fluidized bed boiler, about 50 thousand tons of fly ash per year being a source of nutrients for plants, for example potassium salts, phosphorus, calcium, boron compounds, etc. was derived. The subject of the research were three types of ashes from biomass combustion containing 80% dendromass and 20% agromass. Agromas was made of straw, dried material or sliced palm nuts. The physical characteristics and chemical composition of three basic fly ash samples are presented. Due to the high fineness and thus dusting during spreading, it was found that there is no possibility of the direct use of fly ash from biomass combustion as an alkalizing agent for acidic soils. The lowest bulk density was demonstrated by samples of fly ash originating from the combustion of biomass containing 20% straw as agromass, while the poorest in potassium and phosphorus were ash samples obtained from the combustion of biomass containing 20% agromass in the form of palm kernel slate. As additional components, mineral acids as well as inorganic compounds, including industrial waste, were used to correct the chemical composition and to mineral fertilizer granulation. The number of introduced components was related to the postulated composition of the produced fertilizer. Examples of mineral fertilizers obtained, both simple and multicomponent fertilizers, are presented.

Product quality tests require accurate and precise analytical techniques. Fertilizers belong to a group

of products whose chemical composition is of great importance due to health, environmental and economic

reasons. The following paper presents the results of the research into the content of selected substances in several mineral fertilizers manufactured in Poland. Ion chromatography (IC) was employed to determine selected

inorganic anions and cations, whereas energy dispersive X-ray fluorescence spectrometry (EDXRF) was used

to determine the content of selected elements.

As a rule, nitrates are present in all natural water bodies. Their increased concentrations are connected with the discharge of insufficiently treated wastewater from industrial and communal enterprises, agricultural and livestock complexes. Recent scientific publications concerning treatment methods for nitrates removal from natural water and wastewater were analyzed in order to create effective and low-waste technology for obtaining high quality water. It has been established that the ion exchange method is quite effective for removing nitrates from water. In the paper, the processes of ion exchange removal of nitrates from water on low-axis anionite in DOWEX Marathon WBA in Сl- form were investigated. During the sorption of nitrates with a concentration of 186, 205, 223 and 2200 mg/dm3, it was established that the full exchangeable dynamic capacity was 1.075, 1.103, and 1.195, 1.698 g-eq/dm3, respectively. To regenerate anionite, solutions of ammonia as well as potassium chloride, ammonium chloride and potassium carbonate were used in this work. The choice of potassium and ammonium compounds is due to the prospect of further use of regeneration solutions for the production of liquid fertilizers.