Search for: [Keywords = "Moulding mixtures"]

Search results

Number of results: 1

items per page: 25 50 75

Sort by:

of 1

The Influence of Silica Sand Granulometry and Sorting Level on Thermal Expansion

M. Bašistová P. Lichý

Archives of Foundry Engineering | 2023 | vol. 23 | No 3 | 12-15 | DOI: 10.24425/afe.2023.144309

Keywords Foundry sand Dilatometry Sand grains distribution Sieve analysis Moulding mixtures

Download PDF Download RIS Download Bibtex

Abstract

The quality of the castings depends, among other influences, on the quality of the moulding mixture used. The silica sands used are characterized by high thermal expansion compared to other sands. The tendency to dilatation of the moulding mixture can be influenced by the choice of the granulometric composition of the basic sand and the grain size. The aim of this work is to present the influence of grain distribution of foundry silica sand BG 21 from Biala Góra (Poland) and the degree of sorting (unsorted, monofraction, polyfraction) on the degree of thermal dilatation of the sand and thus on the resulting quality of the casting and susceptibility to foundry defects. For the purpose of measuring thermal dilatation, clay wash analysis was performed, sieve analysis of the sand was carried out, and individual sand fractions were carefully sorted. The measurements confirmed a higher thermal expansion in the case of monofractional sand grading, up to 51.8 %. Therefore, a higher risk of foundry stress-strain defects, such as veining, can be assumed.

Go to article

Bibliography

[1] Czerwinski, F. (2017). Modern aspects of liquid metal engineering. Metallurgical and Materials Transactions B. 48(1), 367-393. DOI: 10.1007/s11663-016-0807-6.
[2] Brůna, M. & Galčík, M. (2021). Casting quality improvement by gating system optimization. Archives of Foundry Engineering. 21(1), 132-136. https://doi.org/10.24425/afe.2021.136089.
[3] Monroe, R. (2005). Porosity in castings. AFS Transactions. 113, 519-546.
[4] Kowalski, J.S. (2010). Thermal aspects of temperature transformation in silica sand. Archives of Foundry Engineering. 10(3), 111-114. ISSN (1897-3310).
[5] Jelínek, P. (2004). Binder systems of foundry moulding mixtures – chemistry of foundry binders. (1st ed.). Ostrava. ISBN: 80-239-2188-6. (in Czech).
[6] Svidró, J., Svidró J. T., & Diószegi, A. (2020). The role of purity level in foundry silica sand on its thermal properties. Journal of Physics: Conference Series. 1527(1), 012039, 1-8. DOI 10.1088/1742-6596/1527/1/012039.
[7] Chao, Ch. & Lu, H. (2002). Stress-induced β→ α-cristobalite phase transformation in (Na2O+Al2O3)-codoped silica. Materials Science and Engineering: A. 328(1-2), 267-276. DOI: 10.1016/S0921-5093(01)01703-8.
[8] Hrubovčáková, M., Vasková, I., Benková, M. & Conev, M. (2016). Opening material as the possibility of elimination veining in foundries. Archives of Foundry Engineering. 16(3), 157-161. DOI: 10.1515/afe-2016-0070.
[9] Beňo, J., Adamusová, K., Merta, V., Bajer, T. (2019). Influence of silica sand on surface casting quality. Archives of Foundry Engineering. 19(2), 5-8. DOI: 10.24425/afe.2019.127107.
[10] Thiel, J., Ziegler, M., Dziekonski, P., Joyce, S. (2007). Investigation into the technical limitations of silica sand due to thermal expansion. Transactions of the American Foundry Society. 115, 383-400.

Go to article

Authors and Affiliations

M. Bašistová

e-mail:

ORCID:

P. Lichý

e-mail:

ORCID:

VSB-Technical University of Ostrava, Faculty of Materials Science and Technology, Department of Metallurgical Technologies, Czech Republic

Search results

Filters

Search results

The Influence of Silica Sand Granulometry and Sorting Level on Thermal Expansion

Abstract

Bibliography

Authors and Affiliations