Knowledge on the physicochemical properties of PM emitted from industrial installations is necessary for assessing current state of ambient air and selecting proper methods for preventing suspended PM from degrading the air quality. Similar to many other industries, fast developing ceramic tile industry releases some amounts of PM to the atmosphere. Samples of PM were taken from main technological operations of three tile manufacturing installations, located in three various plants. The collected PM was examined for granular composition, morphology, phase composition and heavy metal content by using instrumental methods.

Thirteen fractions of ambient dust were investigated in Zabrze, a typical urban area in the central part of Upper Silesia (Poland), during a heating season. Fifteen PAH and Cr, Mn, Co, Ni, As, Se, Cd, Pb contents of each fraction were determined. The dust was sampled with use of a cascade impactor and chemically analyzed with an energy dispersive X-ray fluorescence spectrometer (PANalytical Epsilon 5) and a gas chromatograph with a flame ionisation detector (Perkin Elmer Clarus 500). The concentrations of PM1 and the PM1-related PAH and elements were much higher than the ones of the coarse dust (PM2.5-10) and the substances contained in it. The concentrations of total PAH and carcinogenic PAH were very high (the concentrations of PM1-, PM2.5-, and PM10-related BaP were 16.08, 19.19, 19.32 ng m-3, respectively). The municipal emission, resulted mainly from hard coal combustion processes, appeared to be the main factor affecting the air quality in Zabrze in winter.

Polycyclic aromatic hydrocarbons (PAI-ls) are persistent organic pollutants, ubiquitous in the whole environment. They are relatively well known and are still of interest due to their well documented carcinogenic and mutagenie properties. In ambient air of urban regions they mostly occur as adsorbed to particles of suspended dust. The richest in these compounds and therefore most hazardous to humans, fraction of dust is the fraction of the finest particles. The paper presents results of investigations of dust sampled with use of an impactor Dekati PM10 in Zabrze, a site typical of Upper Silesian conditions. While sampling, the impactor segregates sampled particles into four fractions by their aerodynamic diameters. Sixteen PAHs were determined in each fraction chromatographically. PAH content in the fraction of the finest particles, i.e. in PM1, was of particular interest.

Froin January 2006 on, a continuous experiment consisting in determinations of granulometrie composition of the airborne dust has been performed in the Institute of Environmental Engineering of PAS, Zabrze. The investigations include measurements of concentrations of PM1 - the suspended in ambient air particles of the aerodynamic diameter not grater than I μm - by using the PM10 Dekali impactor. The results of twelve month measurements (January - December 2006) arc presented in the paper: the granulometrie composition of total suspended dust (PM10, PM2.5, PM1) in winter and summer at an urban background site in the Silcsian Agglomeration. Monthly and seasonal average concentrations of PM I O, PM2.5 and PM1 were computed.