The goal of this article is to application of non-silica sands based on alumininosilicates as an alternative of traditionally used chromite sand for alloyed steel and iron castings. Basic parameters as bulk density, pH value of water suspension, refractoriness, grain shape of the testing sands were evaluated. Also mechanical properties of furan no-bake moulding mixtures with testing sand were determined. Finally, the influence of non-silica sand on casting quality was evaluated via semi-scale under normal casting production for sand characterization Optimization of production process and production costs were described.

The main problem in the cores production by cold-box method is the occurence of surface defects due to the tension generated by thermal expansion of the silica sand. One of the possibilities of eliminination is exchange of silica sand from another location. Another interesting factor is the type of used binder and its amount. However, even these measures donʹt guarantee sufficient quality. Foundries most often solve this problem by adding expensive additives to the core mixture. Foundries may have a dilemma in choosing the right additive. The aim of this paper was to investigate the effect of silica sand from two different locations, the effect of dosing the amount of binder and the addition of several types of commonly available additives on the quality of casting cavities. For this purpose, a total of 11 differently composed core sand mixtures were prepared, but only one of these mixtures was successful.

The goal of this contribution is summary of physical – chemistry properties of usually used foundry silica and no – silica sands in Czech foundries. With the help of dilatometry analysis theoretical assumptions of influence of grain shape and size on dilatation value of sands were confirmed. Determined was the possibility of dilatometry analysis employment for preparing special (hybrid) sands with lower and/or more linear character of dilatation.