The standard PN-EN_1993-1-5:_2008 (Eurocode 3) compared with the standard (PN-B-03200:_1990) used previously in Poland, introduces extended rules referring to the computations of the bearing capacity of the plated structural elements including the shear lag effect. The stress distribution in the width flanges is variable. Therefore in the case of the beam with the shear lag effect cannot be calculated by the classic beam theory.

In this article a comparison of the results of the calculations of forces distribution, stresses and displacement according to the rule presented in PN-EN_1993 and results of the numerical computations for_3D model (using finite element method) is presented. The elastic shear lag effects, the elastic shear lag effects including effects of the plate buckling and the elastic-plastic shear lag effects including the local instabilities were analysed. The calculations were performed for beams with a small and a large span and an influence of stiffeners was analysed.

The article aims to evaluate the Portuguese building stock energy policies and strategy for energy saving in buildings among the EU members. It was found out the average heat transfer coefficients of the main structural elements of Portuguese Buildings and analyzed the U-values of this elements considering different time periods.

The fundamentals of this study were funded by the Agency for Development and Innovation (ADI) and co-financed by the European Regional Development Fund (FEDER) through the Operational Program for Competitiveness Factors (POFC) assigned to the Building Physics and Construction Technology Laboratory with the reference SB Tool SPT_2011_4.

The stiffness of structural elements (columns, beams, and slabs) significantly contributes to the overall stiffness of reinforced concrete (RC) high-rise buildings (H.R.B.s) subjected to earthquake. In order to investigate what percentage each type of element contributes to the overall performance of an H.R.B. under seismic load, the stiffness of each type of element is reduced by 10% to 90%. A time history analysis by SAP2000 was performed on thirteen 3D models of 12-story RC buildings in order to illustrate the contribution of column stiffness and column cross sections (rectangular or square), building floor plans (square or rectangular), beam stiffness and slab stiffness, on building resistance to an earthquake. The stiffness of the columns contributed more than the beams and slabs to the earthquake resistance of H.R.B.s. Rectangular cross-section columns must be properly oriented in order for H.R.B.s and slender buildings to attain the maximum resistance against earthquakes.