The proposed Trombe wall design is an innovative and effective solution for addressing issues related to building energy efficiency. The Trombe wall can help reduce a building’s energy consumption, provide optimal indoor temperature, and minimize the building’s environmental impact by utilizing renewable energy sources.The article deals with the study of the heat-air characteristics of the Trombe Wall, which performs the functions of external protection of a modular house, with the aim of further evaluating the possibility of using it as a hybrid protection with additional heating and ventilation functions assigned to it. The results of experimental research conducted on one of the elements of external protection of a modular house in the form of the Trombe Wall are presented. The experimentally obtained graphic dependences were compared with the calculated data and the convergence was evaluated. The proposed design allows you to organize air exchange in the premises with a multiplicity within 1–1.5 h ^-1, and also provides an opportunity to provide additional thermal power in the amount of 250 W/m ². The article presents the results of experimental studies that allow to evaluate the thermal characteristics of the proposed design of external protection for a modular house. These results indicate that with the given geometric dimensions, in particular with a volume of 14 m ³, the thermal power utilized by the Trombe wall is within 0.2–0.7 kW

The influence of the chill on the AlSi7Mg alloy properties after the heat treatment T6, was realised in the system of the horizontally cast plate of dimensions 160x240 mm and thickness of 10 and 15 m. The cooling course in individual casting zones was recorded, which allowed to determine the solidification rate. Castings were subjected to the heat treatment T6 process. Several properties of the alloy such as: hardness BHN, density, tensile strength UTS, elongation %E were determined. The microstructure images were presented and the structural SDAS parameter determined. The performed investigations as well as the analysis of the results allowed to determine the influence zone of the chill. The research shows that there is a certain dependence between the thickness of the casting wall and the influence zone of the chill, being not less than 2g, where g is the casting wall thickness. The next aim of successive investigations will be finding the confirmation that there is the dependence between the casting wall thickness and the influence zone of the chill for other thicknesses of walls. We would like to prove that this principle is of a universal character.