The U-type ferrite is a kind of hexagonal ferrite, and it is known as a microwave absorber in the X-band. The magnetic and dielectric loss of the U-type ferrite change to the composition and coating layer, etc. In this study, the silicon oxide layer was coated on the substituted U-type ferrites to improve microwave absorption characteristics. The complex permittivity and complex permeability were measured using toroidal specimens that were press-molded and the measured frequency range was set from 2-18 GHz. The improvement of the microwave absorption rate was different according to the type of the substituted U-type ferrites. Only in the substituted U-type ferrites with nickel and zinc, an improvement in the microwave absorption rate due to enhancement of magnetic loss was confirmed. The highest microwave absorption was 99.9% at 9.6 GHz, which was S_Z0.5U.

The article shows the results of research on methane concentration changes along mine galleries. The experiment was conducted in a longwall area mined using a U-type system, and the results were obtained in situ. The main goal was to measure methane concentration by function of gallery length and dividing segments of methane data into segments, which ultimately enabled separate analysis of these methane data. The analysis led to the diagnosis of methane hazard through the detection of exceedance of the assumed tolerance area.