Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 9
items per page: 25 50 75
Sort by:
Download PDF Download RIS Download Bibtex

Abstract

The article describes the testing of four selected samples of limestone originating from four commercially exploited deposits. The tests of sorbents included a physicochemical analysis and calcination in different atmospheres. The main aim of the tests was to determine the possibilities for using limestone during combustion in oxygen-enriched atmospheres. Tests in a synthetic flue gas composition make it possible to assess the possibility of CaCO3 decomposition in atmospheres with an increased CO2 concentration.

Go to article

Authors and Affiliations

Angelika Kochel
Aleksandra Cieplińska
Arkadiusz Szymanek
Download PDF Download RIS Download Bibtex

Abstract

This study offers a new method to synthesize facilely willemite (Zn2SiO4) based phosphor at the temperature of 800 °C. The ZnO-SiO2 nanocomposite was calcined at different temperatures between 500 and 1000 °C. The structural, morphological and optical properties of the nanocomposite obtained at various calcination temperatures were studied using different techniques. The FT-IR, XRD and the UV-vis result confirmed the formation of willemite phase. The precursor was confirmed to be amorphous by XRD at room temperature, but upon calcination temperature at 500 °C, it was transformed into a crystalline structure. The crystallinity and the particle size of the nanocomposite increase as the calcination temperature were increased as revealed by XRD and TEM measurement. The sample exhibits a spherical morphology from 500 to 800 °C and dumbbell-like morphology above 800 °C as shown by the FESEM images. The absorption spectrum suffers intense in lower temperature and tends to shift to lower wavelength in the UV region as the calcination temperature increases. The band gap values were found to be increasing from 3.228-5.550 eV obtained between 500 to 1000 °C, and all the results confirm the formation of willemite phase at 800 °C.
Go to article

Authors and Affiliations

Ibrahim Mustapha Alibe
Khamirul Amin Matori
Haj Abdul Aziz Sidek
Yakoob Yazid
Elias Saion
Ali Mustapha Alibe
Mohd Hafiz Mohd Zaid
Ali Engku Abd Ghapur Engku
Tasiu Zangina
Download PDF Download RIS Download Bibtex

Abstract

Two kaolin ores with the almost same fineness and purity of original kaolinite but possessing different kaolinite crystallinity (Hinckley Index) were selected to study the influence of crystallinity and calcination conditions on the pozzolanic activity of metakaolin after dehydroxylation. The different calcination conditions were conducted by altering the calcination temperature and holding time to obtain different metakaolin samples with different degrees of dehydroxylation. Then pozzolanic activities of metakaolin samples were tested by the modified Chapelle test, Frattini test and strength evaluations. Additionally, the apparent activation energies of two kaolin ores were calculated to study the thermal properties of kaolinite by isoconversional methods followed by iterative computations. The results showed that pozzolanic activities were dependent on the degree of dehydroxylation, except for the metakaolins calcined at 900℃ due to the fact that recrystallization and high pozzolanic activity was conducted by complete dehydroxylation (degree of dehydroxylation ≥ 90%). Moreover, the lower crystallinity of original kaolinite favored the removal of the structural hydroxyls, leading to a reduction of apparent activation energy and increase of pozzolanic activity, indicating that the higher calcination temperature or longer holding time was required during calcination to reach the same degree of dehydroxylation and finally highly ordered kaolinite converted into the less active metakaolinite, which was confirmed by the lower Ca(OH)2 consumption in the modified Chapelle test, higher [CaO] and [OH] in the Frattini test and weaker compressive strength.
Go to article

Bibliography

1. Akahira, T. and Sunose, T. 1969. Trans. Joint Convention of Four Electrical Institutes. Paper No. 246. Research Report, Chiba Institute of Technology (Science Technology) 16, pp. 22.
2. ASTM C618:2013. Standard Specification for Fly Ash and Raw or Calcined Natural Pozzolan for Use as a Mineral Admixture in Portland Cement Concrete.
3. Badogiannis et al. 2005 – Badogiannis, E, Kakali, G. and Tsivilis, S. 2005. Metakaolin as supplementary cementitious material: Optimization of kaolin to metakaolin conversion. Journal of Thermal Analysis and Calorimetry 81(2), pp. 49–79.
4. Bich et al. 2009 – Bich, C., Ambroise, J. and Péra, J. 2009. Influence of degree of dehydroxylation on the pozzolanic activity of metakaolin. Applied Clay Science 44(3), pp. 194–200.
5. Cao et al. 2016 – Cao, Z., Cao, Y., Dong, H., Zhang, J. and Sun, C. 2016. Effect of calcination condition on the microstructure and pozzolanic activity of calcined coal gangue. International Journal of Mineral Processing 146, pp. 23–28.
6. Cyr et al. 2006 – Cyr, M., Lawrence, P. and Ringot, E. 2006. Efficiency of mineral admixtures in mortars: quantification of the physical and chemical effects of fine admixtures in relation with compressive strength. Cement and Concrete Research 36, pp. 264–277.
7. Donatello et al. 2010 – Donatello, S., Freeman-Pask, A., Tyrer, M. and Cheeseman, C.R. 2010. Effect of milling and acid washing on the pozzolanic activity of incinerator sewage sludge ash. Cement and Concrete Composites 32, pp. 54–61.
8. EN 196-1:2005. Methods of Testing Cement. Part 1: Determination of strength.
9. EN 196-5:2005. Methods of Testing Cement. Part 5: Pozzolanicity Test for Pozzolanic Cement.
10. Ferraz et al. 2015 – Ferraz, E., Andrejkovičová, S., Hajjaji, W., Velosa, A.L., Silva, A.S. and Rocha, F. 2015. Pozzolanic activity of metakaolins by the french standard of the modified chapelle test: a direct methodology. Acta Geodynamica et Geomaterialia 179, pp. 289–298.
11. Frías et al. 2000 – Frías, M., Sánchez de Rojas, M.I. and Cabrera, J. 2000. The effect that the pozzolanic reaction of metakaolin has on the heat evolution in metakaolin-cement mortars. Cement and Concrete Research 30, pp. 209–216.
12. Galos, K. 2011. Composition and ceramic properties of ball clays for porcelain stoneware tiles manufacture in Poland. Appled Clay Science 51(1), pp. 74–85.
13. Gao et al. 2001 – Gao, Z., Nakada, M. and Amasaki, I. 2001. A consideration of errors and accuracy in the isoconversional methods. Thermochimica Acta 369, pp. 137–142.
14. Janotka et al. 2010 – Janotka, I., Puertas, F., Palacios, M., Kuliffayová, M. and Varga, C. 2010. Metakaolin sand- -blended-cement pastes: rheology, hydration process and mechanical properties. Construction and Building Materials 791, pp. 802–24.
15. Kakali et al. 2001 – Kakali, G., Perraki, T., Tsivilis, S. and Badogiannis, E. 2001. Thermal treatment of kaolin: the effect of mineralogy on the pozzolanic activity. Applied Clay Science 20, pp. 73–80.
16. Kissinger, HE. 1957. Reaction Kinetics in Differential Thermal Analysis. Analytical Chemistry 29(11), pp. 1702–1706.
17. Liu et al. 2000 – Liu, Q, Xu, H. and Zhang, P. 2000. Crystallinity difference for various origin of kaolinites in coal measures. Journal of China Coal Society 25(6), pp. 576–580 (in Chinese).
18. Murat, M. 1983. Hydration reaction and hardening of calcined clays and related minerals I. Preliminary investigation on metakaolinite. Cement and Concrete Research 13, pp. 259–266.
19. NF P18-513:2010. Metakaolin. Pozzolanic addition for concrete. Definitions, specifications and conformity criteria.
20. Ozawa, T. 1965. A New Method of Analyzing Thermogravimetric Data. Bulletin of the Chemical Society of Japan 38(11), pp. 1881–1886.
21. Qiu et al. 2014 – Qiu, X., Lei, X., Alshameri, A., Wang, H. and Yan, C. 2014. Comparison of the physicochemical properties and mineralogy of Chinese (Beihai) and Brazilian kaolin. Ceramics International 40, pp. 5397–5405.
22. Sabir et al. 2001 – Sabir, B.B., Wild, S. and Bai, J. 2001. Metakaolin and calcined clays as pozzolans for concrete: a review. Cement and Concrete Composites 23, pp. 441–454.
23. Saikia et al. 2002 – Saikia, N., Sengupta, P., Gogoi, P.K. and Borthakur, P.C. 2002. Kinetics of dehydroxylation of kaolin in presence of oil field effluent treatment plant sludge. Applied Clay Science 22, pp. 93–102.
24. Samet et al. 2007 – Samet, B., Mnif, T. and Chaabouni, M. 2007. Use of a kaolinitic clay as a pozzolanic material for cements: Formulation of blended cement. Cement and Concrete Composites 29(10), pp. 741–749.
25. Sinthaworn, S. and Nimityongskul, P. 2011. Effects of temperature and alkaline solution on electrical conductivity measurements of pozzolanic activity. Cement and Concrete Composites 33, pp. 622–627.
26. Tironi et al. 2012 – Tironi, A., Trezza, M.A., Irassar, E.F. and Scian, A.N. 2012. Thermal treatment of kaolin: effect on the pozzolanic activity. Procedia Materials Science 1, pp. 343–350.
27. Tironi et al. 2013 – Tironi, A., Trezza, M.A., Scian, A.N. and Irassar, E.F. 2013. Assessment of pozzolanic activity of different calcined clays. Cement and Concrete Composites 37, pp. 319–327.
28. Tironi et al. 2014 – Tironi, A., Trezza, M.A., Scian, A.N. and Irassar, E.F. 2014. Thermal analysis to assess pozzolanic activity of calcined kaolinitic clays. Journal of Thermal Analysis and Calorimetry 117, pp. 547–556.
29. Wild et al. 1996 – Wild, S., Khatib, J.M. and Jones, A. 1996. Relative strength, pozzolanic activity and cement hydration in superplasticised metakaolin concrete. Cement and Concrete Research 26, pp. 1537–1544.
30. Zhang et al. 2015 – Zhang, Y., Xu, L., Seetharaman, S., Liu, L., Wang, X. and Zhang, Z. 2015. Effects of chemistry and mineral on structural evolution and chemical reactivity of coal gangue during calcination: towards efficient utilization. Materials and Structures 48, pp. 2779–2793.

Go to article

Authors and Affiliations

Yuanyuan Liu
1
ORCID: ORCID
Qian Huang
1
Liang Zhao
1
Shaomin Lei
2

  1. Yangtze Normal University, Chongqing Engineering Research Center for Structure Full-Life-Cycle Health Detection and Disaster Prevention, China
  2. Wuhan University of Technology, China
Download PDF Download RIS Download Bibtex

Abstract

The carbothermic reduction of calcined magnesite in vacuum was studied. By thermodynamic analysis, the starting temperature of reduction reaction dropped from 2173K to 1523K when system pressure dropped from 1 atmosphere to 100 Pa. The experiments were carried out at different conditions under 10~100 Pa and the experimental results shown that the reduction extent of MgO improved by increasing the reaction temperature and time, the pellet forming pressure as well as adding fluoride as catalyst. The rate-determining step of carbothermic reduction process was gas diffusion with the apparent activation energy of 241.19~278.56 kJ/mol.
Go to article

Authors and Affiliations

Qifeng Tang
1
ORCID: ORCID
Jinqing Ao
1
ORCID: ORCID
Biyou Peng
1
ORCID: ORCID
Biao Guo
1
ORCID: ORCID
Tao Yang
1
ORCID: ORCID

  1. Xihua University, College of Materials Science and Engineering, Chengdu 610039, PR China
Download PDF Download RIS Download Bibtex

Abstract

Black TiO 2nanofibers have recently emerged as a promising material that has both advantages of black metal oxide and one-dimensional nanostructure. However, current reduction-based synthesis approaches are not compatible with practical applications because these processes require high process costs, complicated processes, and sophisticated control. Therefore, it is still necessary to develop a simple and facile method that can easily introduce atomic defects during the synthesis process. This work suggests an electrospinning process with an antioxidant and subsequent calcination process for the facile synthesis of black TiO 2 nanofibers. The synthesized black TiO 2 nanofiber has an average diameter of 50.3 nm and a rutile structure. Moreover, this nanofiber represented a noticeable black color and a bandgap of 2.67 eV, clearly demonstrating the bandgap narrowing by the introduced atomic defects.
Go to article

Authors and Affiliations

Myeongjun Ji
1
ORCID: ORCID
Eung Ryong Kim
1
ORCID: ORCID
Mi-Jeong Park
1
ORCID: ORCID
Hee Yeon Jeon
1
ORCID: ORCID
Jaeyun Moon
2
ORCID: ORCID
Jongmin Byun
1
ORCID: ORCID
Young-In Lee
1
ORCID: ORCID

  1. Seoul National University of Science and Technology, Department of Materials Science and Engineering, Seoul, 01811, Republic of Korea
  2. University of Nevada, Department of Mechanical Engineering, Las Vegas, 4505 S. Maryland PKWY Las Vegas, NV 89154, United States
Download PDF Download RIS Download Bibtex

Abstract

To produce the lime required for the Bayer process, two parallel flow regenerative shaft kilns (PFR) were used in the Iran Alumina plant located in Jajarm, North Khorasan Province, Iran. In this study, the calcination conditions of limestone were modelled in a laboratory furnace by considering three factors of limestone size, temperature and calcination time using the Box-Behnken method. The calcination model of limestone was obtained using a quadratic equation. Due to the importance of limestone dust in the performance of industrial kilns, conditions of calcification and its reactivity with water were examined at three temperature ranges of 800, 1000, and 1200°C, by two methods of titration and standard ASTM C110. The results indicated a decrease in reactivity of lime relative to the increased temperature of calcination and the lack of forming the burnt lime particles that stick together (blocking). Finally, the ratio of input limestone (kg) to fuel (m3) was reduced from 16.4 to 15.3 to increase the average temperature of the burning zone to 1000°C. Also, excess air was reduced from 40 to 20%. In this condition, the lime quality was increased by about 6% in the kilns.
Go to article

Authors and Affiliations

Hosseinali Mirzaei
1
ORCID: ORCID
Mohammad Noaparast
1
ORCID: ORCID
Hadi Abdollahi
1
ORCID: ORCID

  1. School of Mining Engineering, College of Engineering, University of Tehran, Tehran, Iran
Download PDF Download RIS Download Bibtex

Abstract

Y2O3-MgO nanocomposites are one of the most promising materials for hypersonic infrared windows and domes due to their excellent optical transmittance and mechanical properties. In this study, influence of the calcination temperature of Y2O3-MgO nanopowders on the microstructure, IR transmittance, and hardness of Y2O3-MgO nanocomposites was investigated. It was found that the calcination temperature is related to the presence of residual intergranular pores and grain size after spark plasma sintering. The nanopowders calcined at 1000°C exhibits the highest infrared transmittance (82.3% at 5.3 μm) and hardness (9.99 GPa). These findings indicated that initial particle size and distribution of the nanopowders are important factors determining the optical and mechanical performances of Y2O3-MgO nanocomposites.

Go to article

Authors and Affiliations

S.-M. Yong
D.H. Choi
K. Lee
S.-Y. Ko
D.-I. Cheong

This page uses 'cookies'. Learn more