Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 12
items per page: 25 50 75
Sort by:
Download PDF Download RIS Download Bibtex

Abstract

Statistical conformity criteria for the compressive strength of concrete are a matter of debate. The criteria can have prejudicial effects on construction quality and reliability. Hence, the usefulness of statistical criteria for the small sample size n = 3 is questioned. These defects can cause a reduction in the quality of produced concrete and, consequently, too much risk for the recipient (investor). For this reason, the influence of conformity control on the value of the reliability index of concrete and reinforced concrete has been determined. The authors limited their consideration to the recommended standards PN-EN 206-1, PN-EN 1992 and ISO 2394 method of reliability index, which belongs to the analytical methods FORM (First Order Reliability Method). It assumes that the random variables are defined by two parameters of the normal distribution or an equivalent normal: the mean and the standard deviation. The impact of conformity control for n = 3 for concrete structures, designed according to the Eurocode 1992, for which the compressive strength of concrete is the capacity dominant parameter (sensitivity factor of dominating resistance parameter according to the FORM is 0.8), has been determined by evaluation of the reliability index.

Go to article

Authors and Affiliations

I. Skrzypczak
L. Buda-Ożóg
Download PDF Download RIS Download Bibtex

Abstract

An automated method for crack identification and quantitative description of crack systems in concrete was developed in order to aid a service life assessment of concrete elements in structures. Flat polished specimens for crack analysis were impregnated with epoxy resin containing fluorescent dye. The examination of the crack system was performed in ultraviolet light using a stereomicroscope and an Image Pro Plus image analysis system on specimens cored out of several concrete structures. The laboratory tests were performed on cast specimens to establish correlations between water penetration and chloride diffusion and crack system parameters. The analysis of cracks in concrete cores taken from structures resulted in interesting conclusions based on the crack width distribution and crack localization with respect to steel reinforcement. The method was found very effective to support standard concrete diagnostics methods.

Go to article

Authors and Affiliations

M.A. Glinicki
A. Litorowicz
Download PDF Download RIS Download Bibtex

Abstract

The paper focuses on different approaches to the safety assessment of concrete structures designed using nonlinear analysis. The method based on the concept of partial factors recommended by Eurocodes, and methods proposed by M. Holicky, and by the author of this paper are presented, discussed and illustrated on a numerical example. Global safety analysis by M. Holicky needs estimation of the resistance coefficient of variation from the mean and characteristic values of resistance, and requires two separate nonlinear analyses. The reliability index value and the sensitivity factor for resistance should be also identified. In the method proposed in this paper, the resistance coefficient of variation necessary to calculate the characteristic value of resistance may be adopted from test results and the resultant partial factor for materials properties, and may be calculated according to Eurocodes. Thus, only one nonlinear analysis from mean values of reinforcing steel and concrete is required.

Go to article

Authors and Affiliations

Sz. Woliński
Download PDF Download RIS Download Bibtex

Abstract

The present study has been taken up to emphasize the role of the hybridization process for optimizing a given reinforced concrete (RC) frame. Although various primary techniques have been hybrid in the past with varying degree of success, the effect of hybridization of enhanced versions of standard optimization techniques has found little attention. The focus of the current study is to see if it is possible to maintain and carry the positive effects of enhanced versions of two different techniques while using their hybrid algorithms. For this purpose, enhanced versions of standard particle swarm optimization (PSO) and a standard gravitational search algorithm (GSA), were considered for optimizing an RC frame. The enhanced version of PSO involves its democratization by considering all good and bad experiences of the particles, whereas the enhanced version of the GSA is made self-adaptive by considering a specific range for certain parameters, like the gravitational constant and a set of agents with the best fitness values. The optimization process, being iterative in nature, has been coded in C++. The analysis and design procedure is based on the specifications of Indian codes. Two distinct advantages of enhanced versions of standard PSO and GSA, namely, better capability to escape from local optima and a faster convergence rate, have been tested for the hybrid algorithm. The entire formulation for optimal cost design of a frame includes the cost of beams and columns. The variables of each element of structural frame have been considered as continuous and rounded off appropriately to consider practical limitations. An example has also been considered to emphasize the validity of this optimum design procedure.

Go to article

Authors and Affiliations

Sonia Chutani
Jagbir Singh
Download PDF Download RIS Download Bibtex

Abstract

The purpose of this work is to distinguish between Acoustic Emission (AE) signals coming from mechanical friction and AE signals coming from concrete cracking, recorded during fourteen seismic simulations conducted with the shaking table of the University of Granada on a reinforced concrete slab supported on four steel columns. To this end, a particular criterion is established based on the Root Mean Square of the AE waveforms calculated in two different temporal windows. This criterion includes a parameter calculated by optimizing the correlation between the mechanical energy dissipated by the specimen (calculated by means of measurements with accelerometers and displacement transducers) and the energy obtained from the AE signals recorded by low-frequency piezoelectric sensors located on the specimen. The final goal of this project, initiated four years ago, is to provide a reliable evaluation of the level of damage of Reinforced Concrete specimens by means of AE signals to be used in future Structural Health Monitoring strategies involving RC structures.
Go to article

Authors and Affiliations

Francisco A. Sagasta
Juan L. Torné
Antonio Sánchez-Parejo
Antolino Gallego
Download PDF Download RIS Download Bibtex

Abstract

Reinforced concrete composite slab consists of a thin prefabricated slab in which span reinforcement is located and of concrete joined with the slab, with such concrete being laid on site.

The existence of a joint of two concretes in such floors is interpreted as introducing a contact layer into a monolithic slab. In the paper parameters of two models are estimated. The first is a model of a contact layer and the second is a model of a composite slab with a single degree of freedom. The models consider that the contact has elastic properties and inelastic properties causing energy dissipation. Experimental investigations are discussed further based on which the parameters values of the contact layer model were determined.

Delamination was experienced for the slabs characterised by low contact layer stiffness after applying a maximum load. In addition, the strains of a contact layer having low stiffness are accompanied by lower energy dissipation than of a layer with high stiffness.

The smaller stiffness of composite floors, as compared to monolithic floors, occurs as a consequence of the existence of a joint. Such decrease for a composite slab is interpreted in the model with a single degree of freedom as the serial connection of stiffness of a monolithic slab and an element considering the existence of a contact layer.

The stiffness of an element considering the existence of a contact layer decreases along with a load, and the elements corresponding to the higher stiffness of the contact layer are characterised by higher energy dissipation.

The aforementioned results of the investigations confirm the assumptions of the contact layer model and a composite slab model with a single degree of freedom. The findings made represent a basis for establishing a method of evaluating the condition of a joint in composite slabs according to statistical investigations.

Go to article

Authors and Affiliations

K. Gromysz
Download PDF Download RIS Download Bibtex

Abstract

This paper presents the possibility to apply numerical simulation in static analysis of reinforcedconcrete structure strengthened with carbon fibre reinforced polymer composite strips (CFRP).Reinforced concrete beams, with strengthening in form values CFRP made of carbon fibres andepoxy resin, featuring various width, as well as non-strengthened bent beams, were analysed. Thesimply supported beams arranged in a free support scheme were subjected to two concentratedforces within full range of loading (until collapse). The numerical analysis was performed throughapplication of the Finite Elements Method (FEM), and the calculation model applied took intoaccount the geometric and physical nonlinearity. The problem was solved by application of thequasi-staticstrategy method of calculations using ABAQUS software. While analysing the results,we focused on the run of changes in structure displacement and development of material damage,up to the point of destruction of the beam.

Go to article

Authors and Affiliations

W. Głodkowska
M. Ruchwa
Download PDF Download RIS Download Bibtex

Abstract

The aim of the paper is to present the possibilities and limitations of using the Digital Image Correlation systems. In order to assess the measurement inaccuracies the measuring volume 1250 × 1100 mm was analysed using two cameras with sensor resolution 6 megapixels. It was stated very good accuracy of the line segment length change. It causes that observation of crack widths can be considered as precisely. Some practical information concern how determine the compatibility between crack width measured traditionally and by using DIC are given. In the second part of the paper the results of the tests concerning capacity of interface between two concrete casting at the same time were presented. Use of the optical measurement system Aramis enables the analysis of the deformation, determination of failure mode of the tested specimens and limit displacement between edges of the interface.

Go to article

Authors and Affiliations

Ł. Krawczyk
Michał Gołdyn
ORCID: ORCID
Tadeusz Urban
ORCID: ORCID
Download PDF Download RIS Download Bibtex

Abstract

This study aims to evaluate the effectiveness of machine learning (ML) models in predicting concrete damage using electromechanical impedance (EMI) data. From numerous experimental evidence, the damaged mortar sample with surface-mounted piezoelectric (PZT) material connected to the EMI response was assessed. This work involved the different ML models to identify the accurate model for concrete damage detection using EMI data. Each model has been evaluated with evaluation metrics with the prediction/true class and each class is classified into three levels for testing and trained data. Experimental findings indicate that as damage to the structure increases, the responsiveness of PZT decreases. Therefore, examined the ability of ML models trained on existing experimental data to predict concrete damage using the EMI data. The current work successfully identified the approximately close ML models for predicting damage detection in mortar samples. The proposed ML models not only streamline the identification of key input parameters with models but also offer cost-saving benefits by reducing the need for multiple trials in experiments. Lastly, the results demonstrate the capability of the model to produce precise predictions.
Go to article

Authors and Affiliations

Asraar Anjum
Meftah Hrairi
Abdul Aabid
ORCID: ORCID
Norfazrina Yatim
Maisarah Ali
Download PDF Download RIS Download Bibtex

Abstract

An effective method for the analysis of soil-structure interaction including the behaviour of cylindrical storage tank with varying wall thickness under the action of constant thermal loading is presented. Elastic half-space and the Winkler model have been used for the description of subsoil. The soil-structure interaction is described by using the power series. A computational example of reinforced concrete tank loaded with constant temperature is given. The analysis of a hydrostatically loaded cylindrical tank performed for the model incorporating elastic half-space shows decrease of radial displacements as well as substantial changes in the distribution of bending moments when compared to the Winkler foundation. Additionally, local increase of subsoil reaction around the slab circumference is observed for the case of elastic half-space, in contrast to the Winkler model. However, in the case of a tank loaded with constant temperature, the solutions for both subsoil models do not differ significantly.

Go to article

Authors and Affiliations

Paweł Marek Lewiński
Michał Rak
Download PDF Download RIS Download Bibtex

Abstract

Chloride ion erosion in offshore environment may damage the mechanical properties of beam bridges. In this study, the reinforced concrete specimen was designed, accelerated erosion experiments were carried out to simulate the coastal corrosion environment, and the corrosion rate, nominal strength and equivalent strength of steel bars, concrete cracks and reliability of beam bridges were calculated to understand the time-varying mechanical properties of beam bridges. The results showed that the nominal and equivalent strength of reinforcing bars decreased with the increase of corrosion rate of reinforcing bars. The change of yield strength was greater than that of equivalent strength. The change of crack width of concrete showed a slow-fast-slow trend, and the reliability of beam bridges decreased significantly in about 50 years. The experimental results show that chloride ion corrosion can significantly damage the mechanical properties of the beam bridge and affect the time-varying reliability of the beam bridge. Therefore, it is necessary to carry out timely maintenance and inspection and take effective methods to control steel corrosion to ensure the safety of the use of the beam bridge.

Go to article

Authors and Affiliations

Y.H. Gao
Download PDF Download RIS Download Bibtex

Abstract

An analysis of the dynamic load - carrying capacity of rectangular reinforced concrete deep beam considering the physical nonlinearities of structural materials: concrete and reinforcing steel, is the aim of the paper. The model of the elastic/visco-perfectly plastic material including dynamic yield criterion was applied for the reinforcing steel. The non-standard model of dynamic deformation, regarding the dynamic strength criterion and material softening was applied for the concrete. The method for description of deformation parameters of high strength concrete was included in the model. The method of structure effort analysis was developed using the finite element method. The comparative analyses of the obtained results for three different values of high strengths of concrete and one value of high yield stress for reinforcing steel were carried out in relation to the numerical results obtained for ordinary concrete and steel in case of dynamic loading. In these cases, the significant differences in behavior of reinforced concrete deep beams have been observed and described in detail. The effectiveness of the method analysis and computational algorithms for the problems of numerical simulation of reinforced concrete deep beam dynamic behavior was indicated in the paper.

Go to article

Authors and Affiliations

W. Cichorski
A. Stolarski

This page uses 'cookies'. Learn more