Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 2
items per page: 25 50 75
Sort by:
Download PDF Download RIS Download Bibtex

Abstract

The deviation from the ideal waveform causes disturbances and failure of end-user load equipment. Power traveling a long distance from the generation plant to the end-user leads to deterioration of its quality, and the intensive utilization of power leads to serious issues in the grid resulting in power quality problems. To make the system effective and able to meet modern requirements, flexible AC transmission system (FACTS) devices should be installed into the grid. The interline power flow controller (IPFC) is the latest FACTS device, which compensates for both active and reactive power among multi-line systems. The converters used in the IPFC are crucial as they can be adjusted to regulate the power flow among the lines. This paper proposes a cascaded IPFC with hysteresis and proportional resonant voltage controllers. Some main drawbacks of controllers like steady-state errors and reference tracking of converters can be easily achieved by the PR controller, which makes the system efficient and can be used for a wide range of grid applications. Hysteresis and PR controllers are explained in detail in the following sections. A comparative analysis is carried out among control algorithms to choose the suitable controller which maintains stability in the system.
Go to article

Bibliography

[1] Wai R.J.,WangW.H., Lin C.Y., High-performance Stand-Alone Photovoltaic Generation System, IEEE Transactions on Industrial Electronics, vol. 55, no. 1, pp. 240–250 (2008).
[2] Rahman S., Green power: What is it and where can we find it?, IEEE Power and Energy Magazine, vol. 1, no. 1, pp. 30–37 (2003).
[3] Narender Reddy N., Chandrashekar O., Srujana A., Power quality enhancement by MPC based multilevel control employed with improved particle Swarmoptimized selective harmonic elimination, Energy Sources, Part A: Recovery, Utilization and Environmental Effects, vol. 41, no. 19, pp. 2396–2414 (2019).
[4] Tang Huiling, Wu Jiekang, Multi-objective coordination optimisation method for DGs and EVs in distribution networks, Archives of Electrical Engineering, vol. 68, no. 1, pp. 15–32 (2019).
[5] Narender Reddy N., Chandrasheker O., Srujana A., Power quality enhancement in micro grids by employing MPC-EKF, International Journal of Engineering and Technology (UAE), vol. 7, no. 3, pp. 996–999 (2018).
[6] Bauer P., Strzelecki R., Kazmierkowski M.P., Multilevel Converters, Bulletin of the Polish Academy of Sciences: Technical Sciences, vol. 65, no. 5, 563–565 (2017).
[7] Malinowski M., Cascaded multilevel converters in recent research and applications, Bulletin of the Polish Academy of Sciences Technical Sciences, vol. 65, no. 5, pp. 567–578 (2017).
[8] Zhang X.P., Rehtanz C., Pal B., FACTS-Devices and Applications, in: Flexible AC Transmission Systems: Modelling and Control, Power Systems, Springer, Berlin, Heidelberg (2012).
[9] Perez M.A., Messina A.R., Fuerte-Esquivel C.R., Application of FACTS devices to improve steady state voltage stability, 2000 Power Engineering Society Summer Meeting, vol. 2, pp. 1115–1120 (2000).
[10] Kumar P., Application of fact devices for voltage stability in a power system, 2015 IEEE 9th International Conference on Intelligent Systems and Control (ISCO), pp. 1–5 (2015).
[11] Mohamed K.H., Rao K.S.R., Intelligent optimization techniques for optimal power flow using Interline Power Flow Controller, 2010 IEEE International Conference on Power and Energy, Kuala Lumpur, Malaysia, pp. 300–305 (2010).
[12] Murthy V.N.S.R., Alagappan Pandian, Analysis of capacitor voltage balance in multilevel inverter, International Journal of Applied Engineering Research, 12 (Special Issue 1), pp. 399–406 (2017).
[13] Prasadarao K.V.S., Krishna Rao K.V., Bala Koteswara Rao P., Abishai T., Power quality enhancement in grid connected PV systems using high step up DC-DC converter, International Journal of Electrical and Computer Engineering, vol. 7, no. 2, pp. 720–728 (2017).
[14] Swapna Sai P., Rajasekhar G.G., Vijay Muni T., Sai Chand M., Power quality and custom power improvement using UPQC, International Journal of Engineering and Technology (UAE), vol. 7, no. 2, pp. 41–43 (2018).
[15] Seetharamudu S., Pakkiraiah B., A new converter topology designed for cascaded h bridge fifteen level inverter, International Journal of Engineering and Advanced Technology, vol. 8, iss. 6S3, pp. 792–795 (2019).
[16] Jyothi B., Venu Gopala Rao M., Performance analysis of 3-level 5-phase multilevel inverter topologies, International Journal of Electrical and Computer Engineering, vol. 7, no. 4, pp. 1696–1705 (2017).
[17] Moulali S., Muni Vijay, Subrahmanyam Y., Kesav S., A Flying Capacitor Multilevel Topology for PV System with APOD and POD Pulse Width Modulation, Journal of Advanced Research in Dynamical and Control Systems, vol. 10, no. 2, pp. 96–101 (2018).
[18] Ilhami Colak, Ersan Kabalci, Ramazan Bayindir, Review of multilevel voltage source inverter topologies and control schemes, Energy Conversion and Management, vol. 52, iss. 2, pp. 1114–1128 (2011).
[19] Thumu Raghu, Reddy K., A Review on Fuzzy-GA based Controller for Power Flow Control in Grid Connected PV System, International Journal of Electrical and Computer Engineering, vol. 7, no. 1, pp. 125–133 (2017).
[20] Babu G.S., Reddy R., Nittala R., Reddy K.S., Comparative Analysis of Control Techniques for Interline Power Flow Controller, 3rd International Conference for Convergence in Technology (I2CT) 2018, pp. 1–6 (2018).
[21] Radomski G., Control and modulation methods of voltage source converter, Bulletin of the Polish Academy of Sciences: Technical Sciences, vol. 57, no. 4, pp. 323–336 (2009).
[22] Kabzinski J., Orłowska-Kowalska T., Sikorski A., Bartoszewicz A., Adaptive, predictive and neural approaches in drive automation and control of power converters, Bulletin of the Polish Academy of Sciences Technical Sciences, vol. 68, no. 5, pp. 959–962 (2020).
[23] Zhang Yonglong, An Yuejun, Wang Guangyu, Kong Xiangling, Multi motor neural PID relative coupling speed synchronous control, Archives of Electrical Engineering, vol. 69, no. 1, pp. 69–88 (2020).
[24] Prasadarao K.V.S., Yarra M.S., Maddi S.P.K., Comparative analysis of fuzzy and PI controller based two switch buck-boost converter for power factor correction, International Journal of Applied Engineering Research, 12 (Special Issue 1), pp. 294–301 (2017).
[25] Qader M.R., Identifying the optimal controller strategy for DC motors, Archives of Electrical Engineering, vol. 68, no. 1, pp. 101–114 (2019).
[26] Chilipi R., Al Sayari N., Al Hosani K., Beig A.R., Control scheme for grid-tied distributed generation inverter under unbalanced and distorted utility conditions with power quality ancillary services, in IET Renewable Power Generation, vol. 10, no. 2, pp. 140–149 (2016).
[27] Shen G., Zhu X., Zhang J., Xu D., A New feedback Method for PR Current Control of LCL Filter-Based Grid-Connected Inverter, IEEE Transactions on Industrial Electronics, vol. 57, no. 6, pp. 2033–2041 (2010).
[28] Chinnari M., Mounika T., Swetha K., Bharathi A., Chander A.H., Implementation of Hysteresis Voltage Control for Different Inverter Topologies, 2020 IEEE India Council International Subsections Conference (INDISCON), pp. 272–277 (2020).
[29] Tellapati A.D., Kumar M.K., A simplified hysteresis current control for cascaded converter fed switched reluctance motor, International Journal of Electrical and Computer Engineering, vol. 9, no. 6, pp. 5095–5106 (2019).
[30] Zhang X., Wang J., Li C., Three-Phase Four-Leg Inverter Based on Voltage Hysteresis Control, 2010 International Conference on Electrical and Control Engineering, Wuhan, pp. 4482–4485 (2010).
[31] Ali S.M., Kazmierkowski M.P., Current regulation of four-leg PWM/VSI, IECON ’98, Proceedings of the 24th Annual Conference of the IEEE Industrial Electronics Society (Cat. No.98CH36200), Aachen, Germany, vol. 3, pp. 1853–1858 (1998).
[32] Sivaraman P., Prem P., PR controller design and stability analysis of single stage T-source inverter based solar PV system, Journal of the Chinese Institute of Engineers, vol. 40, no. 3, pp. 235–245 (2017).
[33] Zammit D., Spiteri Staines C., Apap M., Comparison between PI and PR current controllers in grid connected PV inverters, WASET, International Journal of Electrical, Computer, Energetic, Electronic and Communication Engineering, vol. 8, no. 2, pp. 221–226 (2014).
[34] Zhou S., Liu J., Analysis and comparison of resonant-based current controllers implemented in stationary reference frame: A complex pole-zero placement perspective, 2015 IEEE Energy Conversion Congress and Exposition (ECCE), Montreal, QC, 2015, pp. 1624–1631 (2015).
[35] Zmood D.N., Holmes D.G., Stationary frame current regulation of PWM inverters with zero steadystate error, in IEEE Transactions on Power Electronics, vol. 18, no. 3, pp. 814–822 (2003).
[36] Teodorescu R., Blaabjerg F., Liserre M., Loh P.C., Proportional-resonant controllers and filters for grid-connected voltage-source converters, in IEE Proceedings – Electric Power Applications, vol. 153, no. 5, pp. 750–762 (2006).
[37] Daniel Zammit, Cyril Spiteri Staines, Maurice Apap, John Licari, Design of PR current control with selective harmonic compensators using Matlab, Journal of Electrical Systems and Information Technology, vol. 4, iss. 3, pp. 347–358 (2017).
[38] Oruganti H., Dash S.S., Nallaperumal C., Ramasamy S., A Proportional Resonant Controller for Suppressing Resonance in Grid Tied Multilevel Inverter, Energies, vol. 11, no. 5, p. 1024 (2018).
[39] Kavitha R., Thottungal Rani, WTHD minimisation in hybrid multilevel inverter using biogeographical based optimisation, Archives of Electrical Engineering, vol. 63, no. 2, pp. 187–196 (2014).
[40] Armi Faouzi, Manai Lazhar, Besbes Mongi, CHB inverter with DC-link capacitor balancing and total harmonic minimization, Archives of Electrical Engineering, vol. 67, no. 1 (2018).
[41] Jilledi S., Comparison of Multi-Line Power Flow Control using Unified power flow controller (UPFC) and Interline Power Flow Controller (IPFC) in Power Transmission Systems, International Journal of Engineering Science and Technology (IJEST), vol. 3, no. 4, pp. 3229–3235 (2011).


Go to article

Authors and Affiliations

Sridhar Babu Gurijala
1
ORCID: ORCID
D. Ravi Kishore
1
ORCID: ORCID
Ramchandra Nittala
2
ORCID: ORCID
Rohith Reddy Godala
3
ORCID: ORCID

  1. Department of Electrical and Electronics Engineering, Koneru Lakshmaiah Education Foundation, Vaddeswaram, AP, India
  2. Department of Electrical and Electronics Engineering, St. Martin’s Engineering College, Dhulapally, near Kompally, Secunderabad, Telangana, India
  3. Faculty of Power and Electrical Engineering, Institute of Industrial Electronics and Electrical Engineering, Riga Technical University, Riga, Latvia
Download PDF Download RIS Download Bibtex

Abstract

This paper is focused on multiple soft fault diagnosis of linear time-invariant analog circuits and brings a method that achieves all objectives of the fault diagnosis: detection, location, and identification. The method is based on a diagnostic test arranged in the transient state, which requires one node accessible for excitation and two nodes accessible for measurement. The circuit is specified by two transmittances which express the Laplace transform of the output voltages in terms of the Laplace transform of the input voltage. Each of these relationships is used to create an overdetermined system of nonlinear algebraic equations with the circuit parameters as the unknown variables. An iterative method is developed to solve these equations. Some virtual solutions can be eliminated comparing the results obtained using both transmittances. Three examples are provided where laboratory or numerical experiments reveal effectiveness of the proposed method.
Go to article

Bibliography

[1] A. Guney, G. Önal and T. Atmaca, “New aspect of chromite gravity tailings re-processing”, Minerals Engineering, Vol., 24, no 11, pp. 1527- 1530, 2001. https://doi.org/10.1016/S0892-6875(01)00165-0.
[2] W.M. Ambrósa, C.H. Sampaioa, Bogdan G. Cazacliub, Paulo N.Conceiçãoa and Glaydson S.dos Reisab, “Some observations on the influence of particle size and size distribution on stratification in pneumatic jigs”, Powder Technology, Vol. 342, pp. 594-606, 2019. https://doi.org/10.1016/j.powtec.2018.10.029.
[3] M.V. Verkhoturov, “Gravitational enrichment methods”. Moscow: MAX Press, 2006, pp.160- 180. ISBN 5-317-01710-6.
[4] Ya-li Kuang, Jin-Wu Zhuo, Li Wang, Chao Yang, “Laws of motion of particles in a jigging process”, Journal of China University of Mining and Technology, Vol. 18, no 4, pp. 575-579, December 2008. https://doi.org/10.1016/S1006-1266(08)60297-7.
[5] S.Cierpisz. “A dynamic model of coal products discharge in a jig”, Minerals Engineering, Vol. 105, pp. 1-6, 1 May 2017. https://doi.org/10.1016/j.mineng.2016.12.010.
[6] B.A. Suleimenov and Ye.A. Kulakova, “The prospects for the use of intelligent systems in the processes of gravitational enrichment”, Informatyka, Automatyka, Pomiary w Gospodarcei Ochronie Środowiska, Vol. 9, no 2, pp. 46-49, 2019. https://doi.org/10.5604/01.3001.0013.2547.
[7] Y.R. Murthy, S.K. Tripathy, C.R. Kumar, “Chrome ore beneficiation challenges & opportunities – A review”, Minerals Engineering, Vol. 24, no 5, pp. 375-380, 2011, DOI: https://doi.org/10.1016/j.mineng.2010.12.001.
[8] L. Panda, S.K. Tripathy, “Performance prediction of gravity concentrator by using artificial neural network – A case study”. International Journal of Mining Science and Technology, Vol. 24, no 4, pp. 461-465, 2014. https://doi.org/10.1016/j.ijmst.2014.05.007.
[9] Y.R. Murthy, S.K. Tripathy, C.R. Kumar, “Chrome ore beneficiation challenges & opportunities-a review”, Minerals Engineering, Vol. 36, no 5, pp. 375-380, 2014, https://doi.org/10.1016/j.ijmst.2014.05.007.
[10] T. J. Stich, and J.K. Spoerre and T.Velasco, “The application of artificial neutral networks to monitoring and control of an induction hardening process”, Journal of Industrial Technology, Vol. 16, no 1, pp.168-174, 2015.
[11] L.Panda, A.K. Sahoo, S.K Tripathy and others, “Application of artificial neural network to study the performance of jig for beneficiation of noncoking coal”, Fuel, Vol. 97, pp. 151-156, 2012. https://doi.org/10.1016/j.fuel.2012.02.018.
[12] K. Shravan and R. Venugopal, “Performance analyses of jig for coal cleaning using 3D response surface methodology”, International Journal of Mining Science and Technology, Vol. 27, no 2, pp 333-337, March 2017.
[13] B.A. Suleimenov and E.A. Kulakova, “Development of intelligent system for optimal process control”, Resource–saving technologies of raw–material base development in mineral mining and processing: Multy–authored monograph, Universitas Publishing, Romania, Petrosani: 2020, pp.198-217. URI: ep3.nuwm.edu.ua/id/eprint/18359.
[14] V. Mashkov, A. Smolarz, V. Lytvynenko, and K. Gromaszek, “The problem of system fault-tolerance”, Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska, vol. 4, no. 4, pp. 41-44, 2014, https://doi.org/10.5604/20830157.1130182
[15] M. S. Islam, P. Nepal and others. “A knowledge-based expert system to assess power plant project cost overrun risks”, Expert Systems With Applications, Vol. 136, pp. 12-32, 2019. https://doi.org/10.1016/j.eswa.2019.06.030.
[16] B.A.Suleimenov and E.A Kulakova, “Creation the knowledge base of the intelligent control system for gravitational enrichment processes using expert information processing methods”, Vestnik KazNRTU, Vol. 5, no 141, pp. 590-597, October 2020.
[17] Ye.A. Kulakova and B.A. Suleimenov, “Development and Research of Intelligent Algorithms for Controlling the Process of Ore Jigging”, International Journal of Emerging Trends in Engineering Research, Vol. 8, no 9, pp. 6240-6246, September 2020. https://doi.org/10.30534/ijeter/2020/21589202.
[18] N. Siddique. “Intelligent Control”, Springer International Publishing, Switzerland, 2014, pp.54-78. https://doi.org/10.1007/978-3-319-02135-5.
[19] P.V. de Campos Souza, “Fuzzy neural networks and neuro-fuzzy networks: A review the main techniques and applications used in the literature” Applied Soft Computing. Vol. 92, pp. 106275, July 2020. https://doi.org/10.1016/j.asoc.2020.106275.
[20] A.Tripathy, L.Panda, A.K Sahoo, S.K. Biswal, R.K Dwari, A.K. Sahu, “Statistical optimization study of jigging process on beneficiation of fine size high ash Indian non-coking coal”, Advanced Powder Technology, Vol. 27, no 4, pp. 1219-1224, 2016. https://doi.org/10.1016/j.apt.2016.04.006.
[21] A.K. Mukherjeea and B.K. Mishrab, “An integral assessment of the role of critical process parameters on jigging”, International Journal of Mineral Processing Vol. 81, no 3, pp. 187-200, December 2006. https://doi.org/10.1016/j.minpro.2006.08.005.
[22] N.(K.)M. Faber, “Estimating the uncertainty in estimates of root mean square error of prediction: application to determining the size of an adequate test set in multivariate calibration”, Chemometrics and Intelligent Laboratory Systems, Vol. 49, no 1, pp. 79-89, 6 September 1999, https://doi.org/10.1016/S0169-7439(99)00027-1.
Go to article

Authors and Affiliations

Yelena Kulakova
1
Waldemar Wójcik
2
Batyrbek Suleimenov
1
Andrzej Smolarz
2

  1. Satbaev University, Almaty, Kazakhstan
  2. Lublin University of Technology, Lublin, Poland

This page uses 'cookies'. Learn more