The methods of making diamond tools have undergone a remarkable development since the invention of synthetic diamond in the mid-1950s. The current review summarises key historical, recent and ongoing trends and developments in sintered diamond tools. The report concentrates on tools used within the stone and construction industries which, being the main consumers of metal-bonded diamond tools fabricated by powder metallurgy (P/M) technology, have always fuelled advances in tool design and production technologies.

The main purpose of the work was to determine the powder influence of the powder preparation on the microstructure and properties of iron-based sinters used as a metallic-diamond matrix. The sinters obtained from a mixture of comercial powders were used for research. A mixture of powders was selected for the tests, in which the mass fractions of individual powders were as follows: 60% Fe, 23.8% Cu, 4.2% Sn and 12% Ni. The powders were pre-mixed in a Turbula mixer and next a part of material was subjected to milling in a ball mill. Sintering was performed using hot-pressing technique in a graphite mould. The investigated properties of the sinters were concerned density, porosity, hardness, oxygen content, static tensile test and analysis of microstructure. Spot chemical analysis revealed the presence of Fe solution, Cu solution and the presence of iron oxides oxides. Nickel atoms were present throughout the sinter volume. The obtained test results showed that the presented sinter has good functional properties (hardness and thermal expansion) and can be used as a diamond-metal composite matrix in diamond tools.The microstructure and mechanical properties of sinters were investigated.

The main objective of the present work was to determine the effect of powder composition on microstructure and properties of iron-base materials used as matrices in diamond impregnated tools. The Fe-Cu-Ni powders premixed and ball-milled for 30 hours, were used for the experiments. The influence of manufacturing process parameters on microstructure and mechanical properties of produced sinters was investigated. Sintering was done by hot-pressing technique in graphite mould. The powders were consolidated to a virtually pore-free condition during 3 minutes hold at 35MPa and 900°C. Investigations of the sintered materials included: density, hardness, static tensile test and X-ray diffraction (XRD) analysis. Microstructural and fractographic observations were also made with a scanning electron microscope (SEM). The obtained results indicate that the sintered parts have a high density, close to the theoretical value, good plasticity, relatively high hardness and yield strength, and are characterized by a coarse-grained microstructure.

This article discusses results of an analysis of mechanical properties of a sintered material obtained from a mixture of elemental iron, copper and nickel powders ball milled for 60 hours. The powder consolidation was performed by hot pressing in a graphite mould. The hot pressing was carried out for 3 minutes at 900 °C and under a pressure of 35 MPa. The sintered specimens were tested for density, porosity, hardness and tensile strength. Their microstructures and fracture surfaces were also examined using a scanning electron microscope (SEM). The study was conducted in order to determine the suitability of the sintered material for the manufacture of metal-bonded diamond tools. It was important to assess the effects of chemical composition and microstructure of the sintered material on its mechanical properties, which were compared with those of conventional metal bond material produced from a hot-pressed SMS grade cobalt powder. Although the studied material shows slightly lower strength and ductility as compared with cobalt, its hardness and offset yield strength are sufficiently high to meet the criteria for less demanding applications.