Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 3
items per page: 25 50 75
Sort by:
Download PDF Download RIS Download Bibtex

Abstract

In this article, a 3D printed rectangular dielectric resonator antenna which is capable of polarization reconfiguration has been designed. Dielectric resonator is composed of environment friendly and biodegradable material, which is Polylactic Acid. In the proposed model, the polarization can be switch from a linear to a circular by changing the state of a switch, electonically. The antenna switch between two different polarizations: Linear polarization during OFF STATE and Lefthand circular polarization during ON STATE. The proposed 3D printed dielectric resonator antenna is designed to operate in Cband of microwave spectrum, with a broad effective bandwidth (overlapped impedance bandwidths of both states) of 14.542% with centre frequency at 5.845GHz and peak gain 5.5dBi. Further, validated simulated results with experiment and both results are in good agreement.
Go to article

Authors and Affiliations

Maganti Apparao
1
Godi Karunakar
1

  1. Department of Electronics and Communication Engineering, Gitam Institute of Technology, GITAM Deemed to be University, Visakhapatnam, India
Download PDF Download RIS Download Bibtex

Abstract

The method of evaluating the resonant frequencies of multilayered resonator containing demagnetized ferrites is presented. The detailed solution of Maxwell's equations for such a structure by means of the radial modes matching method for TE0mn modes is given. The results of calculations using developed and launched computer program are given. Results of calculations are compared with those obtained by other method using CST simulator. These results are in close agreement, which proves the correctness of the method. The developed solution, and the software program can be used to measure the initial permeability of ferrites.
Go to article

Authors and Affiliations

Krzysztof Derzakowski
1

  1. Institute of Radiolectronics and MultimediaTechnology, Warsaw University of Technology, Poland
Download PDF Download RIS Download Bibtex

Abstract

A resonant frequency control method for dielectric rod resonators is discussed. A dielectric rod of cylindrical shape is placed inside a metal cavity. The bottom face of the dielectric rod is fixed at the metal base plate. Resonant frequency tuning is achieved by lifting the top metal plate above the dielectric rod upper face. The paper presents simulations using the mode matching technique and experimental study of this tunable resonator. Resonant frequency of the basic mode can be tuned by more than an octave with displacements of only tens of micrometres, which is in range of piezoactuators, MEMS, etc. A distinct feature of the proposed tuning technique is that the quality factor of the system does not degrade throughout the tuning range.
Go to article

Bibliography

[1] J. X. Xu, X. Y. Zhang and Q. Xue, "Dual-channel filter based on dielectric resonator for 5G massive MIMO system," 2018 IEEE MTT-S International Wireless Symposium (IWS), Chengdu, 2018, pp. 1-3. https://doi.org/10.1109/IEEE-IWS.2018.8400849
[2] A. Panariello, M. Yu and C. Ernst, "Ku-Band High Power Dielectric Resonator Filters," in IEEE Transactions on Microwave Theory and Techniques, vol. 61, no. 1, pp. 382-392, Jan. 2013. https://doi.org/10.1109/TMTT.2012.2229292
[3] A. Rashidian and L. Shafai, “Low-Profile Dielectric Resonator Antennas for Millimeter-Wave Applications”, in 15th Int. Symp. Antenna Technol. Appl. Electromagn., 2012. https://doi.org/10.1109/ANTEM.2012.6262406
[4] C. Orlob and C. Neumaier, "Tunable quad-mode dielectric resonator filter," 2017 47th European Microwave Conference (EuMC), Nuremberg, 2017, pp. 915-918. https://doi.org/10.23919/EuMC.2017.8230994
[5] F. Lin and M. Rais-Zadeh, “Continuously Tunable 0.55–1.9-GHz Bandpass Filter With a Constant Bandwidth Using Switchable Varactor-Tuned Resonators,” IEEE Trans. Microw. Theory Tech., vol. 65, no. 3, pp. 792–803, March 2017. https://doi.org/10.1109/TMTT.2016.2633270
[6] J. Uher and W. J. R. Hoefer, "Tunable microwave and millimeter-wave band-pass filters," in IEEE Transactions on Microwave Theory and Techniques, vol. 39, no. 4, pp. 643-653, Apr 1991. https://doi.org/10.1109/22.76427
[7] Tao Shen, K. A. Zaki and Chi Wang, "Tunable dielectric resonators with dielectric tuning disks," in IEEE Transactions on Microwave Theory and Techniques, vol. 48, no. 12, pp. 2439-2445, Dec 2000. https://doi.org/10.1109/22.898995
[8] F. Huang, S. Fouladi, and R. Mansour, “High-Q tunable dielectric resonator filters using MEMS technology”, IEEE Trans. Microw. Theory Tech., vol. 59, no. 12, pp. 3401–3409, Dec. 2011. https://doi.org/10.1109/TMTT.2011.2171984
[9] Y. Kobayashi, S. Tanaka, “Resonant modes of a dielectric rod resonator short-circuited at both ends by parallel conducting plates,” IEEE Trans. Microw. Theory Tech., vol. 28, no 10, pp.1077-1085, Oct. 1980. https://doi.org/10.1109/TMTT.1980.1130228
[10] M. Esmaeili, J. Bornemann, “Novel Tunable Bandstop Resonators in SIW Technology and Their Application to a Dual-Bandstop Filter with One Tunable Stopband,” IEEE Microw. Wirel. Compon. Lett., vol. 27, no 1, pp. 40–42, Jan. 2017. https://doi.org/10.1109/LMWC.2016.2630007
[11] B. Potelon, C. Quendo, E. Rius, J.-F. Favennec, “Tunable Bandstop Resonator based on Dual Behavior Resonator Principle,” Proceedings of 2017 IEEE Africon, Cape Town, 2017, pp. 559–562. https://doi.org/10.1109/AFRCON.2017.8095542
[12] J. Berge, A. Vorobiev, W., and S. Gevorgian, “Tunable Solidly Mounted Thin Film Bulk Acoustic Resonators Based on BaxSr1-xTiO3 Films,” IEEE Microw. Wirel. Compon. Lett., vol. 17, no 9, pp. 655–657, Sep. 2007. https://doi.org/10.1109/LMWC.2007.903445
[13] R. Allanic, D. Le Berre, Y. Quéré, C. Quendo, D. Chouteau, V. Grimal, D. Valente, and J. Billoué, “Continuously Tunable Resonator Using a Novel Triangular Doped Area on a Silicon Substrate,” IEEE Microw. Wirel. Compon. Lett., vol. 28, no 12, pp. 1095–1097, Dec. 2018. https://doi.org/10.1109/LMWC.2018.2877661
[14] R.R. Benoit, N.S. Barker, “Superconducting Tunable Microstrip Gap Resonators Using Low Stress RF MEMS Fabrication Process” IEEE J. Electron Devices Soc., vol. 5, no 4, pp. 239–243, Jul. 2017. https://doi.org/10.1109/JEDS.2017.2706676
[15] Zhe Chen, Wei Hong, Jixin Chen, and Jianyi Zhou, “Design of High-Q Tunable SIW Resonator and Its Application to Low Phase Noise VCO” IEEE Microw. Wirel. Compon. Lett., vol. 23, no 1, pp. 43–45, Jan. 2013. https://doi.org/10.1109/LMWC.2012.2234088
[16] Y. Kobayashi and T. Senju, "Resonant modes in shielded uniaxial-anisotropic dielectric rod resonators," in IEEE Transactions on Microwave Theory and Techniques, vol. 41, no. 12, pp. 2198-2205, Dec 1993. https://doi.org/10.1109/22.260706
[17] K. Savin, Yu. Prokopenko and G. A. E. Vandenbosch, “Mode matching technique for tunable shielded cylindrical metal-dielectric resonator,” 33d IEEE Int. Conf. “Electronics and Nanotechnology” (ELNANO-2013), Kyiv, Ukraine, 16–19 April 2013, pp. 118–122. https://doi.org/10.1109/ELNANO.2013.6552054
[18] K. Savin, I. Golubeva, Y. Prokopenko, “Calculation of frequency and power characteristics of the composite metal-dielectric resonator using the method of partial regions,” Radioelectronics and Communications Systems, vol. 59, no.5, p. 229–236, May 2016. https://doi.org/10.3103/S0735272716050058
[19] G. N. Brooke and M. Z. Kharadly, “Field behaviour near anisotropic and multidielectric edges”, IEEE Trans. Antennas Propagat., vol. AP-25, no. 4, pp. 571–575, July 1977. https://doi.org/10.1109/TAP.1977.1141646
[20] I. N. Bondarenko, Y. S. Vasiliev, A. S. Zhizhiriy and A. L. Ishenko, "Arrangement device for monitoring of parameters of microwave resonators," 2010 20th International Crimean Conference "Microwave & Telecommunication Technology", Sevastopol, 2010, pp. 969-970. https://doi.org/10.1109/CRMICO.2010.5632420
[21] Pratsiuk Borys, Prokopenko Yuriy, Poplavko Yuriy. Tunable filters based on metal-dielectric resonators // Proc. of 18th International Conference on Microwave, Radar and Wireless Communications MIKON-2010, June 14-16. – pp. 309-311.
[22] Yu. V. Prokopenko, “Controllability range of dielectric inhomogeneity located between the metal planes,” Tekhnologiya i Konstruirovanie v Elektronnoi Apparature, no. 6, pp. 16-20, Nov. 2012 (in Russian).
[23] K. Savin, P. Sergienko, I. Golubeva, Y. Prokopenko, “Calculation of quality factor of tunable shielded cylindrical metal-dielectric resonator using mode matching technique,” Proc. of 20th International Conference on Microwave, Radar and Wireless Communications MIKON-2014, Gdansk (Poland), June 16-18, pp. 414-416. https://doi.org/10.1109/MIKON.2014.6899952
Go to article

Authors and Affiliations

Kostiantyn Savin
1
Irina Golubeva
1
Victor Kazmirenko
1
Yuriy Prokopenko
1
Guy A.E. Vandenbosch
2

  1. Department of Electronic Engineering, Igor Sikorsky Kyiv Polytechnic Institute, Kyiv, Ukraine
  2. ESAT-TELEMIC Group, KU Leuven, Leuven 3000, Belgium

This page uses 'cookies'. Learn more