Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 2
items per page: 25 50 75
Sort by:
Download PDF Download RIS Download Bibtex

Abstract

Over the last twenty years, there has been a growing interest in the design of tunable devices at microwave frequencies by us- ing liquid crystals technology. In particular, the use of liquid crystals with high dielectric anisotropy allows manufacturing voltage-controlled devices to operate in a wide frequency range. In this work the frequency response of a liquid crystal band-pass filter with dual-mode microstrip structure has been studied in depth by using a simulation software tool. A reshap- ing of a conventional dual-mode square patch resonator bandpass filter with a square notch, studied in the literature, has been proposed with the goal of improving the filter performance. The main features achieved are a significant increase in the return loss of the filter and a narrowing of a 3-dB bandwidth. Specifically, a reduction in the filter bandwidth from 800 MHz to 600 MHz, which leads to a return loss increase from 6 dB to 12.5 dB, has been achieved. The filter centre frequency can be tuned from 4.54 GHz to 5.19 GHz.

Go to article

Authors and Affiliations

J. Torrecilla
C. Marcos
V. Urruchi
J.M. Sánchez-Pena
O. Chojnowska
Download PDF Download RIS Download Bibtex

Abstract

A detailed study about the suitable perturbation element shape and location for tunable BW dual mode microstrip filter which has circular ring resonator is presented. BW tuning is achieved by resonator geometry modification. The study explains the effect of a perturbation element on the stability of the center frequency during BW tuning. Different cases have been studied for two shapes of perturbation element; which one is a rectangular and the other is a radial. The treated cases discuss whether the perturbation element is located in the inner or in the outer circumference of the ring, and whether it is a patch or a notch. BW tuning simulation treated the case of FBW3dB increase for two and three times. The best case of perturbation element which has the best center frequency stability has been modeled, simulated, and fabricated at 2.4 GHz. Geometry modification of the filter took into account the RF MEMS modeling. The filter has an elliptic frequency response, and its FBW has been increased in five steps from 1.7% to 5%. The designed filters were evaluated experimentally and by simulation with very good agreement.

Go to article

Authors and Affiliations

Muhammad Haitham Albahnassi
Adnan Malki
Shokri Almekdad

This page uses 'cookies'. Learn more