This paper proposes a self-excited induction generator model with saturation effect for power generating mode in a remote site. The model is led through the space vector mathematical formalism and allows one to analyze the steady and dynamic states. It is developed for a squirrel cage induction machine. This model provides magnetizing inductance variation able to influence the build-up and the stabilization of voltage generation when the load changes. The final result is a realistic approach model which takes into con- sideration the dependency of the magnetizing inductance versus magnetizing current. This novel model is validated through experimental measurements to demonstrate its validity and practicability.
In this study, it was achieved by using the method of impulse noise to detect internal or surface cracks that can occur in the production of ceramic plates. Ceramic materials are often used in the industry, especially as kitchenware and in areas such as the construction sector. Many different methods are used in the quality assurance processes of ceramic materials. In this study, the impact noise method was examined. This method is a test technique that was not used in applications. The method is presented as an examination technique based on whether there is a deformation on the material according to the sound coming from it as a result of a plastic bit hammer impact on the ceramic material. The application of the study was performed on plates made of ceramic materials. Here, it was made with the same type of model plates manufactured from the same material. The noise that would occur as a result of the impact applied on a point determined on the materials to be tested has been examined by the method of time-frequency analysis. The method applied gives pretty good results for distinguishing ceramic plates in good condition from those which are cracked.
The paper analysed the influence of current frequency on the thermal field of the insulated busbar. Its physical model consist of two hollow cylinders and a solid cylinder with different material properties. In turn, the mathematical model is a system of heat conduction equations with the appropriate set of the boundary, initial and continuity conditions. The problem was solved using the modified Green’s method. As a result, the following characteristics and parameters of the busbar were determined as a functions of frequency: heating curves, local time constants, steady-state current ratings, and stationary temperature profiles. The results were positively verified by finite element method.
Noise is one of the most significant factors which not only disturbs working conditions, but has a large impact on workers’ health. This problem has existed in industries since the beginning and, despite technical and other solutions, it has not been solved. There is a large number of papers, supported with very detailed analyses, that investigate noise levels in industry or contain questionnaires about the impact of noise on workers’ overall health and work abilities. The purpose of this paper is to contribute to the global picture of sustainability and the development of strategies for improving the quality of working environment, with special attention to the generation of noise in different production processes in thirteen different industries in Novi Sad, Serbia. The paper also seeks to examine the advantages and drawbacks of the implemented protective methods and to provide some recommendations for their better implementation in order to contribute to solving this significant problem of today.
[1] Hou C., Zhu M., Chen Y., Cai X., Pre-filter phase-locked loop: principles and effects with inter- harmonic perturbation, IET Renewable Power Generation, vol. 14, no. 16, pp. 3088–3096 (2020), DOI: 10.1049/iet-rpg.2020.0448.
[2] Jove E., Gonzalev C.J.M., Casteleiro R.J.L. et al., An intelligent system for harmonic distortions detection in wind generator power electronic devices, Neurocomputing, vol. 456, pp. 609–621 (2021), DOI: 10.1016/j.neucom.2020.07.155.
[3] Altintasi C., Aydin O., Taplamacioglu M.C. et al., Power system harmonic and interharmonic estima- tion using Vortex Search Algorithm, Electric Power Systems Research, vol. 182, pp. 106187 (2020), DOI: 10.1016/j.epsr.2019.106187.
[4] Sun Y., Lin Y., Wang Y. et al., Theory of symmetric winding distributions and a general method for winding MMF harmonic analysis, IET Electric Power Applications, vol. 14, no. 13 (2021), DOI: 10.1049/iet-epa.2020.0553.
[5] Cao Q., Shen Q.T., An improved �� �� ����harmonic current detecting method and digital LPF filter’s study, Techniques of Automation and Applications, vol. 29, no. 3, pp. 74–76 (2010), http://en.cnki.com.cn/Article_en/CJFDTotal-ZDHJ201003022.htm.
[6] Paplinski J.P., Cariow A., Fast 10-Point DFT Algorithm for Power System Harmonic Analysis, Applied Sciences, vol. 11, no. 15, p. 7007 (2021), DOI: 10.3390/app11157007.
[7] Wu J.Z., Mei F., Chen C., Power system harmonic detection method based on empirical wavelet transform, Power System Protection and Control, vol. 48, no. 6, pp. 136–143 (2020), DOI: 10.19783/j.cnki.pspc.190470.
[8] Li J., Lin H., Teng Z. et al., Digital prolate spheroidal window-based S-transform for time-varying harmonic analysis, Electric Power Systems Research, vol. 187 (2020), DOI: 10.1016/j.epsr.2020.106512.
[9] Zhang Y.L., Chen H.W., Parameter identification of harmonics and inter-harmonics based on ceemd- wpt and Prony algorithm, Power System Protection and Control, vol. 46, no. 12, pp. 115–121 (2018), DOI: 10.7667/PSPC170866.
[10] Yang Y.K., Yang M.Y., Application of prony algorithm in parameter identification of harmon- ics and inter-harmonics, Proceedings of the CSU-EPSA, vol. 24, no. 3, pp. 121–126 (2012), http://en.cnki.com.cn/Article_en/CJFDTOTAL-DLZD201203024.htm.
[11] Zhang Y., Fan W., Zhang Q., Li X., Harmonic separation from grid voltage with EEMD-ICA and SVD, Computer Measurement and Control, vol. 27, no. 3, pp. 39–43 (2019), http://www.jsjclykz.com/ ch/reader/view_abstract.aspx?file_no=201809061095.
[12] Chen Q., Cai W., Sun L. et al., Harmonic detection method based on VMD, Electrical Measurement and Instrumentation, vol. 55, no. 2, pp. 59–65 (2018), https://doi.org/10.1088/1742-6596/2095/1/012057.
[13] Thirumala K., Umarikar A.C., Jian T., Estimation of single-phase and three -phase power -quality indices using empirical wavelet transform, IEEE Transactions on Power Delivery, vol. 30, no. 1, pp.445–454 (2015), DOI: 10.1109/TPWRD.2014.2355296.
[14] Desai V.A., Rathore S., Harmonic detection using Kalman filter, In Proceedings of the 2016 Interna- tional Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT), Chennai, India, pp. 858–863 (2016), DOI: 10.1109/ICEEOT.2016.7754808.
[15] Tiyarachakun S., Areerak K.L., Areerak K.N., Instantaneous Power Theory with Fourier and Optimal Predictive Controller Design for Shunt Active Power Filter, Model. Simul. Eng., pp. 1–20 (2014), DOI: 10.1155/2014/381760.
[16] Habrouk M., Darwish M.K., Design and implementation of a modified Fourier analysis harmonic current computation technique for power active filters using DSPs, IEEE Proc. Electr. Power Appl., vol. 148, pp. 21–28 (2001), DOI: 10.1049/ip-epa:20010014.
[17] Karimi H., Karimi G.M., Reza I.M., Bakhshai A.R., An adaptive filter for synchronous extraction of har- monics and distortions, IEEE Trans. Power Deliv., vol. 18, pp. 1350–1356 (2003), DOI: 10.1515/ijeeps- 2013-0145.
[18] Musa S., Mohd M.A., Hoon Y., Modified Synchronous Reference Frame Based Shunt Active Power Filter with Fuzzy Logic Control Pulse Width Modulation Inverter, Energies, vol. 10, no. 758 (2017), DOI: 10.3390/en10060758.
[19] Narongrit T., Areerak K.L., Areerak K.N., A New Design Approach of Fuzzy Controller for Shunt Active Power Filter, Electr. Power Compon. Syst., vol. 43, pp. 685–694 (2015), DOI: 10.1080/ 15325008.2014.996680.
[20] Sujitjorn S., Areerak K.L., Kulworawanichpong T., The DQ Axis with Fourier (DQF) Method for Harmonic Identification, IEEE Trans. Power Deliv., vol. 22, pp. 737–739 (2007), DOI: 10.1109/TP- WRD.2006.882465.
[21] Daubechies I., Jianfeng L., Synchrosqueezed wavelet transforms: An empirical mode decomposition- like tool, Applied and Computational Harmonic Analysis, vol. 30, no. 2, pp. 243–261 (2011), DOI: 10.1016/j.acha.2010.08.002.
[22] Li L., Cai H.Y., Jiang Q.T., Ji H.B., Adaptive synchrosqueezing transformwith a time-varying parameter for non-stationary signal separation, Applied and Computational Harmonic Analysis, vol. 49, no. 3, pp. 1884–2020 (2019), DOI: 10.1016/j.acha.2019.06.002.
[23] Gang Y., Zhonghu W., Ping Z., Zhen L., Local maximum synchrosqueezing transform: An energy- concentrated time-frequency analysis tool, Mechanical Systems and Signal Processing, vol. 117, pp. 537–552 (2019), DOI: 10.1016/j.ymssp.2018.08.006.
[24] Lin L., Haiyan C., Qiangtang J., Hongbing J., An empirical signal separation algorithm for multicom- ponent signals based on linear time-frequency analysis, Mechanical Systems and Signal Processing. vol. 121, pp. 791–809 (2019), DOI: 10.1016/j.ymssp.2018.11.037.
[25] Rasoul M.M., Alan F.L., Yunwei L., Adaptive control of an active power filter for harmonic suppres- sion and power factor correction, International Journal of Dynamics and Control, pp. 1–10 (2021), DOI: 10.1007/s40435-021-00825-0.
[26] Avalos O., Cuevas E., Becerra H.G. et al., Kernel Recursive Least Square Approach for Power System Harmonic Estimation, Electric Power Components and Systems, vol. 48, no. 16–17, pp. 1708–1721 (2021), DOI: 10.1080/15325008.2021.1908457.
[27] Mert A., Celik H.H., Emotion recognition using time-frequency ridges of EEG signals based on multivariate synchrosqueezing transform, Biomedizinische Technik. Biomedical Engineering, vol. 66, no. 4, pp. 345–352 (2021), DOI: 10.1515/bmt-2020-0295.
[28] Yang C., Ban L., Research on Harmonic Detection System Based on Wavelet Packet Transform, IOP Conf. Series: Journal of Physics: Conf. Series, vol. 1314, no. 012038 (2019), DOI: 10.1088/1742-6596/1314/1/012038.
[29] Gong M.F. et al., A New Method to Detect Harmonics and Inter-Harmonics Based on Hilbert Marginal Spectrum, Applied Mechanics and Materials, vol. 229–231, pp. 1060–1063 (2012), DOI: 10.4028/www.scientific.net/AMM.229-231.1060.
[30] Yu M., Wang B., Wang W.B. et al., An inter-harmonic detection method based on synchrosqueezing wavelet transform, Proceedings of the CSEE, vol. 36, no. 11, pp. 2944–2951 (2016), DOI: 10.13334/j.0258-8013.pcsee.2016.11.010.
[31] Chang G.W. et al., A Hybrid Approach for Time-Varying Harmonic and Interharmonic Detection Using Synchrosqueezing Wavelet Transform, Applied Sciences, vol. 11, no. 2, pp. 752 (2021), DOI: 10.3390/app11020752.
[32] Khoa N.M., Le V.D., Tung D.D., Toan N.A., An advanced IoT system for monitoring and analysing chosen power quality parameters in micro-grid solution, Archives of Electrical Engineering, vol. 70, no. 1, pp. 173–188 (2021), DOI: 10.24425/aee.2021.136060.
[33] Yudaev I.V., Rud E.V., Yundin M.A., Ponomarenko T.Z., Isupova A.M., Analysis of the harmonic composition of current in the zero-working wire at the input of the load node with the prevailing non-linear power consumers, Archives of Electrical Engineering, vol. 70, no. 2, pp. 463–473 (2021), DOI: 10.24425/aee.2021.136996.
[1] Hussain H.M., Narayanan A., Nardelli P.H.J., Yang Y., What Is Energy Internet? Concepts, Technologies, and Future Directions, IEEE Access., vol. 8, pp. 183127–183145 (2020), DOI: 10.1109/access.2020.3029251.
[2] Tao Z., Jiahui J., Daolian C., An efficient and low-cost DMPPT approach for photovoltaic sub-module based on multi-port DC converter, Renewable Energy, vol. 178, pp. 1144–1155 (2021), DOI: 10.1016/j.renene.2021.06.134.
[3] Jiang J., Zhang T., Chen D., Analysis, Design, and Implementation of a Differential Power Processing DMPPT With Multiple Buck–Boost Choppers for Photovoltaic Module, IEEE Transactions on Power Electronics, vol. 36, no. 9, pp. 10214–10223 (2021), DOI: 10.1109/tpel.2021.3063230.
[4] Xianglin L., Zhiwei X., Xueyu Y., Lixia Z., Wenzhong M., Wei H., Low-complexity multivector-based model predictive torque control for PMSM with voltage preselection, IEEE Transactions on Power Electronics, vol. 36, no. 10, pp. 11726–11738 (2021), DOI: 10.1109/tepl.2021.3073137.
[5] Xianglin L., Zhiwei X., Lixia Z., Wei H., A low-complexity three-vector-based model predictive torque control for SPMSM, IEEE Transactions on Power Electronics, vol. 36, no. 11, pp. 13002–13012 (2021), DOI: 10.1109/TPEL.2016.2532387.
[6] Rahbar K., Chai C.C., Zhang R., Energy cooperation optimization in microgrids with renew- able energy integration, IEEE Transactions on Smart Grid, vol. 9, no. 2, pp. 1482–1493 (2018), DOI: 10.1109/tsg.2016.2600863.
[7] Quint R. et al., Transformation of the grid: the impact of distributed energy resources on bulk power systems, IEEE Power and Energy Magazine, vol. 17, no. 6, pp. 35–45 (2019), DOI: 10.1109/mpe. 2019.2933071.
[8] Salem Q., Liu L., Xie J., Dual operation mode of a transformerless h-bridge inverter in low- voltage microgrid, IEEE Transactions on Industry Applications, vol. 55, no. 5, pp. 5289–5299 (2019), DOI: 10.1109/tia.2019.2917807.
[9] Hanchao Z., Daolian C., A single-stage isolated charging/discharging DC-AC converter with sec- ond harmonic current suppression in distributed generation systems, IECON 2017 – 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, pp. 4427–4432 (2017).
[10] Liu S., He Y., Wang G., Wang M., Power Decoupling Control for Boost-Type Single-Phase Inverter with Active Power Buffer, 2019 IEEE Energy Conversion Congress and Exposition, Maryland, USA, pp. 2280–2285 (2019).
[11] Stawiarski Ł., Piróg S., Active power decoupling topology for AC-DC and DC-AC single-phase systems with decoupling capacitor minimization, Archives of Electrical Engineering, vol. 67, no. 1, pp. 193–205 (2018), DOI: 10.24425/aee.2018.119001.
[12] Xu S., Chang L., Shao R., Single-phase voltage source inverter with voltage Boosting and power decoupling capabilities, IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 8, no. 3, pp. 2977–2988 (2020), DOI: 10.1109/jestpe.2019.2936136.
[13] Chen Z., Wu Q., Yuan Y., A novel zero-voltage-switching push–pull high-frequency-link single-phase inverter, IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 4, no. 2, pp. 421–434 (2016), DOI: 10.1109/jestpe.2015.2505171.
[14] Watanabe H., Itoh J., Novel DC to single-phase AC isolated current source inverter with power decou- pling capability for micro-inverter system, 2015 IEEE Energy Conversion Congress and Exposition, Montreal, Canada, pp. 158–165 (2015).
[15] Chakraborty S., Chattopadhyay S., An isolated Buck-Boost type high-frequency link photovoltaic microinverter, 2016 IEEE Applied Power Electronics Conference and Exposition, California, USA, pp. 3389–3396 (2016).
[16] Jiang J., Li Z., Chen D., A quasi single stage isolated Buck-Boost mode multi-input inverter, 2019 10th International Conference on Power Electronics and ECCE Asia, Busan, Korea, pp. 1–6 (2019).
[17] Baoge Z., Deyu H., Tianpeng W., Zhen Z., Donghao W., A novel two-phase interleaved parallel bi-bidrectional DC/DC converter, Archives of Electrical Engineering, vol. 70, no. 1, pp. 219–234 (2021), DOI: 10.24425/aee.2021.136063.
[18] Hong F., Liu J., Ji B., Zhou Y., Wang J., Wang C., Single inductor dual Buck full-bridge inverter, IEEE Transactions on Industrial Electronics, vol. 62, no. 8, pp. 4869–4877 (2015), DOI: 10.1109/tie.2015.2399280.
[19] Zhang L., Zhang T., Hao Y., Wang B., Two-stage dual-Buck grid-tied inverters with efficiency en-hancement, 2019 IEEE Applied Power Electronics Conference and Exposition, California, USA, pp. 3251–3256 (2019).
[20] Jagan V., Kotturu J., Das S., Enhanced-Boost quasi-z-source inverters with two-switched impedance networks, IEEE Transactions on Industrial Electronics, vol. 64, no. 9, pp. 6885–6897 (2017), DOI: 10.1109/tie.2017.2688964.
[21] Zhu X., Zhang B., Qiu D., A high Boost active switched quasi-z-source inverter with low input current ripple, IEEE Transactions on Industrial Informatics, vol. 15, no. 9, pp. 5341–5354 (2019), DOI: 10.1109/tii.2019.2899937.
[22] Leonardo P. Sampaio, Moacyr A.G. de Brito, Luigi G. Junior, Single-phase current-source-Boost inverter for renewable energy sources, 2011 IEEE International Symposium on Industrial Electronics, Gdansk, Poland, pp. 1118–1123 (2011), DOI: 10.1109/ISIE.2011.5984201.
[23] Nattymol Y.J., Shanavas T.N., Power quality analysis of single-phase transformer-less Buck-Boost inverter for compressor load, 2019 IEEE International Conference on Intelligent Techniques in Control, Optimization and Signal Processing (INCOS), Tamilnadu, India (2019), DOI: 10.1109/IN-COS45849.2019.8951345.
[24] Sreekanth T., Lakshmi Narasamma N., Mahesh K. Mishra, Sijo Augustine, A single stage cou- pled inductor based high gain DC-AC Buck-Boost inverter for photovoltaic (PV) applications, 2015 IEEE 42nd Photovoltaic Specialist Conference (PVSC), New Orleans, LA, USA (2015), DOI: 10.1109/pvsc.2015.7356269.
The main objective of this paper is to produce an applications-oriented review covering infrared techniques and devices. At the beginning infrared systems fundamentals are presented with emphasis on thermal emission, scene radiation and contrast, cooling techniques, and optics. Special attention is focused on night vision and thermal imaging concepts. Next section concentrates shortly on selected infrared systems and is arranged in order to increase complexity; from image intensifier systems, thermal imaging systems, to space-based systems. In this section are also described active and passive smart weapon seekers. Finally, other important infrared techniques and devices are shortly described, among them being: non-contact thermometers, radiometers, LIDAR, and infrared gas sensors.
A traditional frequency analysis is not appropriate for observation of properties of non-stationary signals. This stems from the fact that the time resolution is not defined in the Fourier spectrum. Thus, there is a need for methods implementing joint time-frequency analysis (t/f) algorithms. Practical aspects of some representative methods of time-frequency analysis, including Short Time Fourier Transform, Gabor Transform, Wigner-Ville Transform and Cone-Shaped Transform are described in this paper. Unfortunately, there is no correlation between the width of the time-frequency window and its frequency content in the t/f analysis. This property is not valid in the case of a wavelet transform. A wavelet is a wave-like oscillation, which forms its own “wavelet window”. Compression of the wavelet narrows the window, and vice versa. Individual wavelet functions are well localized in time and simultaneously in scale (the equivalent of frequency). The wavelet analysis owes its effectiveness to the pyramid algorithm described by Mallat, which enables fast decomposition of a signal into wavelet components.
Oxbow lakes occurring in floodplains are those natural elements that are subject to rapid changes, which may lead to their disappearance. These are extremely valuable ecosystems and landscape components, as well as water management units. However, they quickly disappear if they are not periodically fed with river water, which takes place especially when rivers are embanked. Such a situation occurs, among others in Warsaw, in the Vistula valley. There are many opportunities for the reactivation of oxbow lakes, including through technical activities. It is not always possible to restore the naturalvalues of the valley in urbanized areas, however, oxbow lakes can then also play a recreational role and they can fulfill an important task in improving the quality of life, being also an important element of the public space system. The author has carried out research related to land development projects of the new district located in the Vistula River valley in Warsaw (the Siekierkowski Arc). Many different design solutions have been proposed, taking as a leitmotiv the restoration of oxbow lakes, for example: (1) reconstruction of the water channel in the former watercourse with the boulevard along its fragment and with the public park in another part, (2) water supplying of the existing oxbow lake through the green and blue infrastructure system. The author presents few urban designs carried out under her direction for this area and shows that creative reactivation of oxbow lakes can improve water conditions, and be beneficial for the introduction of a new, attractive development.
en
pl
