A new method measuring of mass in electronic system of scales has been described. The main element of this system is inductive measuring load cell, which was compared with strain gauge load cell. The aim of the paper is described advantages of the inductive measuring system of mass and explain some main problems of this system. Digital correction of the mechanical errors of the beam like: hysteresis, creep material of the beam under constant load, influence of ambient temperature was described.

The paper presents a construction of a system for measurements of pH, concentration of calcium ions and concentration of heavy metal ions in water. Three fiber optic sensors in flow configuration were designed and tested. The system is fully automatic and can be used for water quality monitoring.

The electrical power drawn by an induction motor is distorted in case of appearance of a certain type of failures. Under spectral analysis of the instantaneous power one obtains the components which are connected with definite types of damage. An analysis of the amplitudes and frequencies of the components allows to recognize the type of fault.

The paper presents a metrological analysis of the measurement system used for diagnosis of induction motor bearings, based on the analysis of the instantaneous power. This system was implemented as a set of devices with dedicated software installed on a PC. A number of measurements for uncertainty estimation was carried out. The results of the measurements are presented in the paper. The results of the aforementioned analysis helped to determine the measurement uncertainty which can be expected during bearing diagnostic measurements, by the method relying on measurement and analysis of the instantaneous power of an induction machine.

The paper presents a method of measuring deformations of cylindrical samples on the testing machine for free tube hydroforming experiments. During experiments a sample made of a thin-walled metal tube is expanded by the internal pressure of the working liquid and additionally subjected to axial compression. This results in a considerable circumferential deformation of the tube and its shortening. Analysis of the load cases and their impact on the deformations can be helpful in determining e.g. tube material properties or general limiting conditions in the tube hydroforming process. In connection with the above, the value of deformations and knowledge of their course during experiment has become one of the most important problems related to the issue described above.

Robotic total stations are a group of surveying instruments that can be used to measure moving prisms. These devices can generate significant errors during kinematic surveys. This is due to the different speeds of the total station’s measurement subsystems, which results in the observations of the point location being performed in different places of the space. Total stations which are several years old may generate errors of up to a few dozen centimeters. More modern designs, with much lower delays of the mechanical and electronic subsystems, theoretically allow to significantly reduce the values of the errors. This study involved the performance of kinematic tests on the modern robotic total station Leica MS50 in order to determine the values of measurement errors, and also to define the possibility of using them for the above-mentioned applications.

It was demonstrated that in the fishes of the species Trematomus bernacchi, predominant in the regions of the USSR Antarctic Station Mirny (Davis Sea), body proportions changes along with the growth of these specimens. Measurements include 20 plastic features in 171 fishess (total length 110.2—265.0 mm). Statistically significant variations of eleven proportions of the body were stated during the growth of the fishes. Five other proportions changed in a degree of little statistical significance, whereas the last three of the body proportions did not change at all.

The results and method of measurements of D, H and T carried out at Hornsund in the summer of 1979 are presented. The relative and absolute values of these elements are given in reduction to the Polish magnetic station at Hornsund. An initial evaluation of changes in the magnetic field from 1957 to 1979 is carried out.

This paper presents the results of magnetic mapping carried out in the area of the metamorphic series of Ariekammen and Skoddefjellet. On the basis of qualitative interpretation of measurements a number of anomalous zones were distinguished, whose position can be correlated with local changes in mineralitation and polymetallic ore content in the Fuglebergsletta area. The SE-NW orientation, skew to the almost meridional run of the layers of slates and marbles making up the metamorphic complex, dominates in the course of the anomalous zones.

This paper presents the way in which temperature is measured in tests concerning structural transformations in various types of steel under welding conditions. In the test methodology, a small-sized steel specimen was subjected to simulated welding thermal cycles, during which the temperature of the specimen, changes in magnetic permeability and thermal expansion were measured simultaneously. The measurements of those parameters required the non-contact heating of the specimen, which involved the use of heating lamps. The temperature measurement was of key importance because the subsequent analysis of the remaining parameters was performed in the function of temperature.

The tests of structural transformations resulted in the development of Continuous Cooling Transformation under welding conditions (CCT) diagrams, enabling the determination of steel weldability and constituting the source of information needed to determine the effect of welding thermal cycles on the structure and properties of the material subjected to the tests.

Related numerical models to be used as the basis for the analysis of temperature distribution in the test specimen have been developed. These tests involved the analysis of the values and the distribution of temperature in relation to various model parameters, i.e. thermocouple types, geometrical features of a thermocouple junction and the diameter of thermocouple wires. The results of FEM calculations have been compared to the experiments.

The activity of territorial self-government shaped institutionally during the development process is characterized by a significant scope of care for the financial situation, which determines the efficiency of its functioning. The general availability of public services is a condition for the assessment of the activities of municipalities (powiats, voivodeships). Institutional economy as a real one, takes into account an integrated point of view. The aim of the study is to present the territorial differentiation of the eff ectiveness of communes’ activities in the context of institutional economics and to present the possibility of using a synthetic measure in this process. The synthetic measure of development fluctuated within the limits of 0.30 – Wąchock (Starachowice poviat, urban-rural commune) to 0.41 – Ostrowiec Św. (Ostrowiecki poviat, urban commune) in 2009, 0.32 – Łączna (Skarżysko poviat, rural commune) to 0.40 – Starachowice (Starachowice poviat, municipal commune) in 2015. The results of the analysis confirm the existence of small differences in the assessment of development communes of the Kamienna Basin. This approach allows the assessment of municipalities using one size and allows you to organize the analyzed objects in terms of the considered phenomenon.

The concept of `diversity' has been one of the main open issues in the field of multiple classifier systems. In this paper we address a facet of diversity related to its effectiveness for ensemble construction, namely, explicitly using diversity measures for ensemble construction techniques based on the kind of overproduce and choose strategy known as ensemble pruning. Such a strategy consists of selecting the (hopefully) more accurate subset of classifiers out of an original, larger ensemble. Whereas several existing pruning methods use some combination of individual classifiers' accuracy and diversity, it is still unclear whether such an evaluation function is better than the bare estimate of ensemble accuracy. We empirically investigate this issue by comparing two evaluation functions in the context of ensemble pruning: the estimate of ensemble accuracy, and its linear combination with several well-known diversity measures. This can also be viewed as using diversity as a regularizer, as suggested by some authors. To this aim we use a pruning method based on forward selection, since it allows a direct comparison between different evaluation functions. Experiments on thirty-seven benchmark data sets, four diversity measures and three base classifiers provide evidence that using diversity measures for ensemble pruning can be advantageous over using only ensemble accuracy, and that diversity measures can act as regularizers in this context.

Implementation of European directives is closely related to the quality of production and the associated operational safety, maintenance of machines and mechanical systems, both mobile or stationary, in order to reduce the dynamic load (vibration and noise) on the working environment, not only during their operating state but also during their design, production, and setting of the vibration isolation components. Reducing the dynamic load of mechanical systems and their components is reflected in the working environment by reduced emissions and immissions of noise and vibration. The presented paper investigates the methods and conditions for noise and vibration control, focusing mainly on increasing the quality of rotating machine components, such as bearings by means of effective vibration isolation of the machines. The solution of this problem requires theoretical analysis and methodology for the measurement of the mechanical systems involved. The results of the vibroacoustic measurements were analysed in terms of the low frequency vibration and noise level (quality) of bearings and conditions for effective vibration isolation of the machines using vibroacoustic diagnostic method. Furthermore, the impact on the working environment was also analysed. Finally, the paper suggests some actions to be taken to effectively reduce the unwanted vibrosound energy in working places, also using recycled material as a vibration isolation element.