In the context of climate change, it is important to minimize the changes that are introduced in the territory adjacent to the object of human economic activity. In some cases, this can be done with the help of drainage-screened modules – an anti-filtration screen that redistributes the zone of influence of the drain placed near it. As a result, the drain regulates to a greater extent the zone of human economic activity (drainage system, tailing dump, populated area, etc.) and to a lesser extent lowers the level of groundwater in the adjacent territory. The use of drainage-screened modules in tailing farms, for the organized storage of mineral waste of enterprises makes it possible to increase the filtration stability of dike, ensuringthe uniform operation of the tailing dams, as well as reliable removal of intercepted groundwater. This is achieved because in the tailing farm the dikes are intensified by drainage-screened modules. Water, filtered through the body of the dike and under it, is intercepted by a drain. A part of the filtration flow, which is not intercepted by the drain, is stopped by the anti-filtration screen.

A concern about the current state of relations between industry and the environment is

often neglected. However, it is important to underline that industry and sustainability are

not mutually exclusive. There are many industrial processes to blame when analyzing the

negative impact on current socio-ecological environment. The emerging question is whether

companies nowadays are ready to face challenges in the name of sustainability, the future

of the planet and generations to come. In addition, an assessment of industrial processes

may be very time-consuming and costly in financial terms. This fact allows developing sustainability

assessment approach and its measures for keeping track on to evaluate scale of

environmental, social and economic changes. The goal of the paper is to develop a multicriteria

decision-making approach for sustainability assessment of renewable energy technology.

A sustainability assessment approach combines life cycle-based methods integrated with

multi-criteria decision-making method based on analytical hierarchy process. The resulting

assessment method allows finding a compromise between industry and the environment and

identify potential intervention points for further research. As a result of decision-making

process, string ribbon technology was considered as the most sustainable. The applicability

of the proposed method is assessed based on photovoltaic panels.

The performance of the multi-input multi-output (MIMO) systems can be improved by spatial modulation. By using spatial modulation, the transmitter can select the best transmit antenna based on the channel variations using channel state information (CSI). Also, the modulation helps the transmitter to select the best modulation level such that the system has the best performance in all situations. Hence, in this paper, two issues are considered including spatial modulation and information modulation selection. For the spatial modulation, an optimal solution for obtaining the probability of selecting antenna is calculated and then Huffman coding is used such that the transmitter can select the best transmit antenna to maximize the channel capacity. For the information modulation, a multi quadrature amplitude modulation (MQAM) strategy is used. In this modulation, the modulation size is changed based on the channel state variations; therefore, the best modu- lation index is used for transmitting data in all channel situations. In simulation results, the optimal method is compared with Huffman mapping. In addition, the effect of modulation on channel capacity and a bit error rate (BER) is shown.

In this paper we propose a new sliceable bandwidth variable transponder (SBVT) architecture with the separate analysis on the transmitter and receiver section. In transmission section we propose a distance module (DM) which is a programmable module. It divides a data stream/main stream (which employs a super-channel) into sub-stream and assigned modulation technique to each sub-stream based on their light path distance detailing the concept of sub-channel. In this paper, we have also proposed an algorithm for the distance module. Next we propose a modulation and transmission module (M&TM), where, planar light wave circuit (PLC) is used for enabling three modulation techniques (PM-16QAM, PM-QPSK and PM-BPSK). Finally, we propose the receiving section, which is designed to support three modulation techniques. It consists of two demodulator circuits, one for PM-16QAM/PM-QPSK and the other for PM-BPSK. In this proposed work, we focus on the multi-mode interference (MMI) devices (MMI coupler and MMI splitter) because of their photonic integration technology which is necessary for the implementation of SBVT. Lastly, we propose an elastic optical node architecture which removes the limitations of previously discussed node architecture for long distance communication.

The energy efficiency of photovoltaic modules is one of the most important aspects in energetic and economic aspects of the project related to system installations. The efficiency of modules and the electricity produced by photovoltaic conversion in solar modules is affected by many factors, both internal, related to the module structure itself and its technical and external factors related to the energy infrastructure, which includes: cabling, inverters, climate conditions prevailing at the micro-installation location and the orientation and angle of inclination of the solar modules. The installation of photovoltaic modules should be preceded by an energy efficiency analysis, which will help to indicate the optimal solution adapted to the given conditions. The article presents a comparative analysis of the amount of energy produced under real and simulated conditions. Analyzes were made on the basis of research carried out in the Wind and Solar Energy Laboratory located at the AGH University of Science and Technology, data from solar irradiation data-bases and computer software for estimating energy resources. The study examined the correlation of the solar irradiation on the modules and the amount of electricity generated in the photovoltaic module. The electricity produced by the module was compared under real conditions and simulated based on two sources of data. The comparison and analysis of the amount of energy of the module were also made, taking simulated different angles of the module’s inclination into account.

The paper presents the results of the energy analysis of the conversion of solar radiation energy into electrical energy in Polish weather conditions. The effect of sunlight and working temperature on the photovoltaic module on its power curve P = f(U) is shown. STC and NOCT conditions are described for which the manufacturers specify the parameters of the photovoltaic modules. The manufacturers of photovoltaic panels should give the PPV = f(E) characteristic for the different values of the operating temperature of the modules. An analysis of the economic efficiency of a photovoltaic power plant investment of 1 MWp taking the current legal regulations for the three variants into account was presented. Variant I – the investor benefits from the support of public aid of operational only, Variant II – the investor benefits from the support of public aid for investment in the amount of PLN 1 million, Variant III – the investor benefits from the support of public aid for investment in the amount of PLN 2 million. For all variants, indicators for assessing the economic effectiveness of the investment and the value of the auction price from the maximum price to the price at which the project loses its profitability are determined.

The specific working conditions of the wind turbine in strong wind cause a number of problems in the measurement of noise indicators used in its short and long-term assessment. The wind is a natural working environment of the turbine, but it also affects the measurement system, moreover, it can be a secondary source of other sounds that interfere with the measurement. One of the effective methods of eliminating the direct impact of wind on the measurement system is placing the microphone on the measurement board at ground level. However, the obtained result can not be directly compared with the admissible values, as it has to be converted to a result at a height of 4 m. The results of previous studies show that this relation depends, inter alia, on the speed and direction of the wind. The paper contains the results of measurements on the measurement board, according to EN 61400-11:2013, and at a height of 4 m above ground made simultaneously in three points around the 2 MW turbine at various instantaneous speeds and changing wind directions. Analysis of the impact of measuring point location on the measurement result of noise indicators and the occurrence of additional features affecting the relationship between the values measured on the board and at the height of 4 m, and especially the tonality, amplitude modulation and content of low frequency content, was m

The emerging potentials in the electronics field, which facilitate the creation of complex projects with innovative functionalities, while maintaining low costs, are becoming even more appreciated by designers and engineers. In this manuscript, a telemetry system was designed and realized for monitoring main parameters of a racing vehicle. A STM32 Nucleo board acquires data from sensors installed on vehicle and transmits them to a base station. Acquired data are both stored on a SD card and wirelessly transmitted, for ensuring robustness/reliability of operation. The carried out tests confirm the truthfulness and compatibility of acquired data related to the vehicle parameters.

Arriving at a good combination of coding and modulation schemes that can achieve good error correction constitutes a challenge in digital communication systems. In this work, we explore the combination of permutation coding (PC) and pulse amplitude modulation (PAM) for mitigating channel errors in the presence of background noise and jitter. Since PAM is characterised with bi-polar constellations, Euclidean distance is a good choice for predicting the performance of such coded modulation setup. In order to address certain challenges facing PCs, we therefore introduce injections in the coding system, together with a modified form of PAM system. This modification entails constraining the PAM constellations to the size of the codeword’s symbol. The results obtained demonstrate the strength of the modified coded PAM system over the conventional PC coded PAM system.

An optimal design of a slot waveguide is presented for realizing an ultrafast optical modulator based on a 220 nm silicon wafer technology. The recipe is to maximize the confinement and interaction between optical power supported by the waveguide and electric field applied through metallic electrodes. As height of waveguide is fixed at 220 nm, the waveguide and slot width are optimized to maximize the confinement factor of optical power. Moreover, metal electrodes tend to make the waveguide lossy, their optimal placement is calculated to reduce the optical loss and enhance the voltage per unit width in the slot. Performance of an optimally designed slot waveguide with metal electrodes as ultrafast modulator is also discussed.