This paper presents new procedure modeling based on finite element method analysis of wood-framed timber structures. The fasteners linking boards of sheathing with the timber frame both modeled applying shell finite element, with individual material parameters, remain the main objective of this manuscript. Material parameters are obtained from experimental tests and numerical identification. The main objective of the paper is the elaboration of the numerical model with high precision of mapping, and, at the same time, diminishing the number of the unknown simplifying the process of the modeling of timber structures. The new presented method leads to a simplification of analysis of multistory wood-framed multifamily building structures.

The paper is dedicated to the discussion of elastic coefficients of wood. Parameters for wood presented in the literature are critically evaluated and discussed. The orthotropic mathematical model, with nine different elastic parameters, is one of the most often used models of wood. However, mathematical limitations on these parameters for the correct model are not well known. Based on these limitations, the verification of orthotropic elastic parameters for different species of wood is presented. The analysis shows that the published data are often unclear and sometimes wrong. The attempt to relate experimental results to the mean values specified in the standards is the second aspect considered in this paper. The designer, a user of these standards, should have clear information that the given parameters are specified for specific mathematical model and species of wood. This paper attempts to propose such a classification.

In the present article, we introduced a new model of the equations of general ized thermoelasticity for unbounded orthotropic body containing a cylindrical cavity. We applied this model in the context of generalized thermoelasticity with phase-lags under the effect of rotation. In this case, the thermal conductivity of the material is considered to be variable. In addition, the cylinder surface is traction free and subjected to a uniform unit step temperature. Using the Laplace transform technique, the distributions of the temperature, displacement, radial stress and hoop stress are determined. A detailed analysis of the effects of rotation, phase-lags and the variability thermal conductivity parameters on the studied fields is discussed. Numerical results for the studied fields are illustrated graphically in the presence and absence of rotation.

The subject of the analytical and experimental studies therein is of two metal seven-layer beam - plate bands. The first beam - plate band is composed of a lengthwise trapezoidally corrugated main core and two crosswise trapezoidally corrugated cores of faces. The second beam - plate band is composed of a crosswise trapezoidally corrugated main core and two lengthwise trapezoidally corrugated cores offaces. The hypotheses of deformation of a normal to the middle surface of the beams after bending are formulated. Equations of equilibrium are derived based on the theorem of minimum total potential energy. Three-point bending of the simply supported beams is theoretically and experimentally studied. The deflections of the two beams are determined with two methods, compared and presented.

On the 14th of February, 2015, a huge fire broke out on Łazienkowski Bridge; a five span bridge, 423 m long and 28 m wide, built in the years 1972-74. It was a fully steel structure with four plate girders and orthotropic deck. The fire started under the first span during the replacement of wooden service decks. The next day, the Department of Bridges of the Warsaw University of Technology was designated to conduct an expertise material investigation, geometrical verification, and FEM model analysis. The subject of this paper concentrates on geometrical issues. The main difficulty of this task was the lack of full reference data regarding the bridge's original structure. The old design was incomplete and there was no actual surveying results for the undamaged structure. As a conclusion, some remarks focused on surveying measurements and on the final decision regarding this bridge are given. It was eventually exchanged into a brand new one and put into public use on the 28th of October, 2015.

The aim of the paper is to formulate physically well founded yield condition for initially anisotropic solids revealing the asymmetry of elastic range. The initial anisotropy occurs in material primarily due to thermo-mechanical pre-processing and plastic deformation during the manufacturing processes. Therefore, materials in the “as-received” state become usually anisotropic. After short account of the known limit criteria for anisotropic solids and discussion of mathematical preliminaries the energy-based criterion for orthotropic materials was formulated and confronted with experimental data and numerical predictions of other theories. Finally, possible simplifications are discussed and certain model of isotropic material with yield condition accounting for a correction of shear strength due to initial anisotropy is presented. The experimental verification is provided and the comparison with existing approach based on the transformed-tensor method is discussed.

Fatigue properties of orthotropic steel bridge deck of Xinghai Bay Cross-sea Bridge in Dalian were analyzed. The segment model of orthotropic bridge deck was established by using the finite element software Abaqus. The intersection between diaphragm and U-rib was selected to analysis. The fatigue loading model III was adopted which was provided by “Specifications for Design of Highway Steel Bridge”. First, the transverse stress influence line and the transverse severest loading position were determined. Then, five loading regions were selected near the transverse severest position. The stress amplitude of the intersection was ascertained through loading on the longitudinal bridge for each region. Finally, the fatigue checking for the intersection was carried out. The results showed that the maximum fatigue stress amplitude of orthotropic deck in Xinghai Bay Cross-sea Bridge met the requirements of "Specifications for Design of Highway Steel Bridge".