The results of a study on axial dispersion in commercially available open cell metal (Nickelchromium) and ceramic (Vukopor A) foams with different pore density are presented. Residence time distributions were determined using tracer pulse experiments applying the convolution method to post process the recorded tracer concentration signals. The influence of liquid viscosity (water and 45 wt.% glycerol solution) and bed length (from 0.1 to 0.9 m) on axial dispersion was tested. It was found that fluid velocity, viscosity and foam morphology affected axial dispersion. Moreover, the axial dispersion coefficient for solid foams is lower than that of packed beds.

Inexpensive synthesis of electroceramic materials is required for efficient energy storage. Here the design of a scalable process, flame spray pyrolysis (FSP), for synthesis of size-controlled nanomaterials is investigated focusing on understanding the role of air entrainment (AE) during their aerosol synthesis with emphasis on battery materials. The AE into the enclosed FSP reactor is analysed quantitatively by computational fluid dynamics (CFD) and calculated temperatures are verified by Fourier transform infrared spectroscopy (FTIR). Various Li4Ti5O12 (LTO) particle compositions are made and characterized by N2 adsorption, electron microscopy and X-ray diffraction while the electrochemical performance of LTO is tested at various charging rates. Increasing AE decreases recirculation in the enclosing tube leading to lower reactor temperatures and particle concentrations by air dilution as well as shorter and narrower residence time distributions. As a result, particle growth by coagulation - coalescence decreases leading to smaller primary particles that are mostly pure LTO exhibiting high C-rate performance with more than 120 mAh/g galvanostatic specific charge at 40C, outperforming commercial LTO. The effect of AE on FSP-made particle characteristics is demonstrated also in combustion synthesis of LiFePO4 and ZrO2.