In the ironmaking, sizes of raw materials such as iron ores and coke must be adjusted for subsequent process in the blast furnace. The depletion of high grade iron ore in recent years necessitates a technology that can utilize low-grade fine iron ores. Thus, steelmakers have been studying the sinter-briquette complex firing process that employs a method of charging the sinter feed together with briquettes made of fine iron ore. In this process, larger briquettes increase the briquette productivity per unit time but decrease the green strength of briquettes and they can break during transportation and charging. Thus, the briquette shape is very important.

Therefore, in this study, we simulate a twin roll briquetting process using the DEM analysis and compared the compressive force distributions in the briquette for different aspect ratios. This study is a new attempt, because research cases by numerical methods on the same or similar systems are very rare. Consequently, the optimal aspect ratio is 0.5 at briquette height 20 mm, 2.0 at 30 mm, and 1.5 at 40 mm. Also, the average compressive force increased in proportion with the pocket height at the same aspect ratio. Therefore, to increase the pocket depth for high productivity, the pocket height must also be increased for obtaining high strength briquettes.